Modification History
Release 3. This is the third release of this qualification in the UEG Gas Industry Training Package.
|
Release 2. This is the second release of this qualification in the UEG Gas Industry Training Package.
|
Release 1. This is the first release of this qualification in the UEG Gas Industry Training Package |
Qualification Description
This qualification provides competencies to manage gas supply industry activities, including management of projects covering the installation, diagnostics and maintenance of distribution and transmission gas pipelines and associated equipment. No licensing, legislative or certification requirements apply to this qualification at the time of publication. |
Entry Requirements
There are no entry requirements for this qualification |
Packaging Rules
A total of 1600 weighting points comprising: 280 core weighting points listed below; plus 1320 elective weighting points from the elective units listed below. Choose a minimum of 1320 weighting points elective units from the list below, of which between 0 and 260 weighting points can be taken from Group A, between 0 and 180 weighting points can be taken from Group B, between 330 and 670 weighting points can be taken from Group C, between 300 and 810 weighting points can be taken from Group D, and between 180 and 340 weighting points can be taken from Group E. Up to 260 weighting points of the elective units Group A , may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEG CVIG, if not listed weighting points will be 10 points unless directed from the Gas Industry Reference Committee (IRC). The general elective units must contribute to the vocational outcomes of the qualification. Where imported units are selected, care must be taken to ensure all prerequisite units specified are complied with. Where a prerequisite unit is attached to a unit, it is identified by this symbol ∟. |
||
Core units |
Weighting Points |
|
UEGNSG005 |
Prepare to work in the gas industry |
20 |
UEGNSG113 |
Manage a utilities industry WHS management system |
80 |
UEGNSG120 |
Manage gas system environmental compliance |
60 |
UEGNSG132 |
Carry out basic work activities in a gas industry work environment |
60 |
UEGNSG133 |
Comply with environmental policies and procedures in the utilities industry |
40 |
UEGNSG141 |
Apply workplace health and safety regulations, codes and practices in the gas supply industry |
20 |
Group A: Imported and common elective units. |
Weighting Points |
|
BSBHRM523 |
Coordinate the learning and development of teams and individuals |
60 |
BSBINS501 |
Implement information and knowledge management systems |
50 |
BSBLDR522 |
Manage people performance |
70 |
BSBOPS502 |
Manage business operational plans |
60 |
BSBOPS505 |
Manage organisational customer service |
40 |
BSBPEF501 |
Manage personal and professional development |
60 |
BSBSTR301 |
Contribute to continuous improvement |
40 |
BSBSTR501 |
Establish innovative work environments |
50 |
BSBSTR502 |
Facilitate continuous improvement |
60 |
BSBTWK502 |
Manage team effectiveness |
60 |
BSBWHS521 |
Ensure a safe workplace for a work area |
60 |
PMAOMIR512 |
Establish incident response preparedness and response systems |
70 |
PMAOPS223 |
Operate and monitor valve systems |
40 |
Group B: General elective units. |
Weighting Points |
|
UEECD0007 |
Apply work health and safety regulations, codes and practices in the workplace |
20 |
UEECD0019 |
Fabricate, assemble and dismantle utilities industry components ∟ UEECD0007 Apply work health and safety regulations, codes and practices in the workplace |
40 |
UEECD0051 |
Use drawings, diagrams, schedules, standards, codes and specifications ∟ UEECD0007 Apply work health and safety regulations, codes and practices in the workplace |
40 |
UEGNSG004 |
Locate, prove and protect utility assets |
60 |
UEGNSG006 |
Use a portable gas detector to locate escape |
40 |
UEGNSG134 |
Establish a utilities infrastructure work site |
60 |
UEGNSG140 |
Apply environmental policies and procedures in the utilities industry |
20 |
UEGNSG206 |
Construct and lay copper and stainless steel gas distribution pipelines |
60 |
UEGNSG219 |
Conduct excavations in the utilities industry |
60 |
UEGNSG226 |
Assist with the construction, laying and connection of gas distribution services to mains |
40 |
UEGNSG227 |
Assist with the construction and laying of gas distribution mains |
40 |
UEGNSG230 |
First on site response to gas pipeline emergencies ∟CPPFES2005 Demonstrate first attack firefighting equipment ∟HLTAID011 Provide First Aid ∟UEGNSG141 Apply workplace health and safety regulations, codes and practices in the gas supply industry |
90 |
UEGNSG303 |
Carry out transmission pipeline construction work activities |
60 |
UEGNSG316 |
Work in proximity of transmission pipeline construction plant and equipment |
40 |
UEGNSG330 |
Coat metallic pipelines |
80 |
UEGNSG331 |
Establish right of way access for transmission pipeline construction |
60 |
UEGNSG342 |
Maintain pipeline easements |
40 |
UEGNSG615 |
Fill LPG cylinders |
80 |
UEGNSG616 |
Refurbish gas cylinders |
80 |
UEGNSG702 |
Disconnect and reconnect small capacity gas meters |
40 |
UEGNSG708 |
Pressure test residential and small commercial gas installations |
40 |
UEGNSG709 |
Process meter reading information using appropriate technology |
40 |
UEGNSG710 |
Read and record meter readings |
40 |
UEGNSG714 |
Relight Type A gas appliances |
60 |
UEGNSG804 |
Maintain single stage and single run gas flow and pressure control and measuring devices |
80 |
UEPOPS203 |
Operate and monitor communications system |
20 |
UEPOPS205 |
Conduct minor mechanical maintenance |
30 |
UETTDREL14 |
Working safely near live electrical apparatus as a non-electrical worker |
40 |
Group C: General elective units |
Weighting Points |
|
UEECD0050 |
Use and maintain the integrity of a portable gas detection device ∟ UEECD0007 Apply work health and safety regulations, codes and practices in the workplace |
20 |
UEGNSG103 |
Install and commission stationary gas fuelled turbine engines ∟CPCCWHS1001 Prepare to work safely in the construction industry ∟HLTAID009 Provide cardiopulmonary resuscitation |
60 |
UEGNSG135 |
Monitor and control gas odourisation |
100 |
UEGNSG137 |
Operate and maintain gas station water bath heaters |
60 |
UEGNSG139 |
Repair and maintain stationary gas fuelled turbine engines |
60 |
UEGNSG142 |
Conduct isolations under the permit to work system for gas industry work sites |
80 |
UEGNSG205 |
Commission or decommission gas distribution pipelines |
100 |
UEGNSG208 |
Construct and lay large copper gas distribution pipelines |
60 |
UEGNSG209 |
Construct and lay polyethylene gas distribution mains |
60 |
UEGNSG211 |
Construct and lay steel gas distribution pipelines |
60 |
UEGNSG212 |
Construct, lay and connect a gas distribution service to a plastic main |
60 |
UEGNSG213 |
Construct, lay and connect a gas distribution service to a steel main |
60 |
UEGNSG217 |
Launch and recover PIGs in a gas distribution pipeline |
100 |
UEGNSG218 |
Carry out surveillance on gas distribution assets |
90 |
UEGNSG222 |
Construct and lay nylon or PVC gas distribution mains |
60 |
UEGNSG225 |
Perform routine maintenance on distribution pipeline facilities and equipment |
100 |
UEGNSG229 |
Prepare simple drawings of as laid gas mains and services |
40 |
UEGNSG304 |
Commission or decommission gas transmission pipelines |
120 |
UEGNSG313 |
Monitor and operate flow control, pressure measuring and regulating devices for gas transmission |
100 |
UEGNSG317 |
First response to a gas facility event ∟CPPFES2005 Demonstrate first attack firefighting equipment ∟HLTAID011 Provide First Aid ∟UEGNSG141 Apply workplace health and safety regulations, codes and practices in the gas supply industry |
60 |
UEGNSG346 |
Launch and recover PIGs in gas transmission pipelines |
100 |
UEGNSG347 |
Perform routine maintenance on transmission pipeline facilities and equipment |
110 |
UEGNSG348 |
Supervise the operation of plant and equipment for the construction of gas transmission pipelines |
60 |
UEGNSG349 |
Carry out surveillance of gas transmission pipelines |
110 |
UEGNSG352 |
Check and report on gas station conditions |
40 |
UEGNSG353 |
Carry out aerial surveillance of gas transmission pipelines |
60 |
UEGNSG354 |
Control excavations in the vicinity of gas transmission pipelines |
60 |
UEGNSG355 |
Monitor and report on cathodic protection systems |
60 |
UEGNSG411 |
Maintain cathodic protection systems |
100 |
UEGNSG412 |
Install cathodic protection systems |
110 |
UEGNSG506 |
Respond to gas infrastructure emergencies |
80 |
UEGNSG509 |
Remotely monitor and operate gas transmission flow and pressure measuring and regulating devices |
90 |
UEGNSG614 |
Load, unload, exchange and connect LPG cylinders |
80 |
UEGNSG617 |
Monitor and control the transfer of bulk LPG |
100 |
UEGNSG618 |
Process liquefied petroleum gas (LPG) |
100 |
UEGNSG619 |
Perform scheduled maintenance on gas processing or storage facilities and equipment |
110 |
UEGNSG620 |
Organise the repair of faults in LPG processing or storage facilities and equipment |
80 |
UEGNSG621 |
Control bulk storage of LPG |
110 |
UEGNSG622 |
Assess the operational capability of gas safety equipment on a delivery vehicle |
40 |
UEGNSG706 |
Test new residential and small commercial gas installations |
60 |
UEGNSG713 |
Investigate billing exceptions-conditions |
60 |
UEGNSG805 |
Maintain multi-stage and multi-run gas flow and pressure measuring and regulating devices |
80 |
UEGNSG807 |
Install gas flow, measuring and pressure regulating devices |
80 |
UEGNSG811 |
Monitor and operate complex flow control, measuring and regulating devices for gas distribution |
110 |
UEPMNT367 |
Install and commission stationary gas fuelled reciprocating engines ∟ CPCCWHS1001 Prepare to work safely in the construction industry ∟ HLTAID001 Provide cardiopulmonary resuscitation |
60 |
UEPMNT368 |
Repair and maintain stationary gas fuelled reciprocating engines ∟ CPCCWHS1001 Prepare to work safely in the construction industry ∟ HLTAID001 Provide cardiopulmonary resuscitation |
60 |
UEPOPS317 |
Operate and monitor fixed fire protection systems |
30 |
UEPOPS336 |
Manage, operate and monitor a gas turbine unit |
60 |
UEPOPS347 |
Operate and monitor supervisory, control and data acquisition systems |
40 |
Group D: General elective units |
Weighting Points |
|
MSL974019 |
Perform chemical tests and procedures |
100 |
MSL975040 |
Apply routine chromatographic techniques ∟ MSL974019 Perform chemical tests and procedures |
100 |
MSL975047 |
Apply complex instrumental techniques ∟ MSL974019 Perform chemical tests and procedures |
80 |
UEECD0024 |
Implement and monitor energy sector WHS policies and procedures |
20 |
UEGNSG106 |
Coordinate repair of pipeline, facilities and equipment |
110 |
UEGNSG108 |
Operate and monitor pipeline control systems |
60 |
UEGNSG109 |
Control field pipeline operations |
60 |
UEGNSG110 |
Supervise technical operations for gas distribution or transmission |
60 |
UEGNSG131 |
Compile a gas industry technical report |
20 |
UEGNSG210 |
Supervise and monitor contract staff for work on distribution pipelines |
120 |
UEGNSG214 |
Coordinate and conduct gas distribution pipeline repair and modifications |
110 |
UEGNSG215 |
Coordinate construction, laying and testing of gas distribution pipelines |
110 |
UEGNSG305 |
Coordinate gas transmission pipeline repairs and modifications |
110 |
UEGNSG307 |
Coordinate the operation of relevant plant and equipment for transmission pipeline construction |
80 |
UEGNSG309 |
Coordinate transmission pipeline construction operations |
60 |
UEGNSG310 |
Supervise and monitor contract work |
60 |
UEGNSG314 |
Liaise with third party and the community to maintain pipeline integrity and community safety |
40 |
UEGNSG326 |
Coordinate and monitor staff and contractors |
60 |
UEGNSG501 |
Communicate with gas industry stakeholders to meet operational requirements |
110 |
UEGNSG503 |
Monitor and control field activities |
110 |
UEGNSG504 |
Monitor and control gas infrastructure using Control Centre systems |
110 |
UEGNSG505 |
Operate and monitor gas infrastructure to meet nominated demand |
120 |
UEGNSG806 |
Maintain SCADA controlled flow and pressure equipment and electronic gas measurement equipment |
100 |
Group E: General elective units |
Weighting Points |
|
UEGNSG102 |
Prepare safe design specifications of a gas system |
120 |
UEGNSG202 |
Conduct emergency site control on gas distribution assets |
100 |
UEGNSG301 |
Conduct emergency site control on gas transmission assets |
120 |
UEGNSG502 |
Implement emergency and critical incident response for gas infrastructure incidents |
120 |
Qualification Mapping Information
This qualification replaces and is equivalent to UEG50118 Diploma of Gas Supply Industry Operations |
Links
Companion Volume Implementation Guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=6a6c032e-ffcb-4f3d-8063-415efbd261e8