Modification History
Not Applicable
Unit Descriptor
Unit Descriptor |
1 ) 1 .1 ) Descriptor |
This unit covers resolving problems in hydronic systems. It encompasses working safely and to standards, applying knowledge of the components and resolving problems in hydronic systems, using effective problem solving techniques and documenting solutions. |
Application of the Unit
Application of the Unit |
4 ) |
This unit is intended to augment previously acquired competencies. It is suitable for employment-based programs under an approved contract of training. |
Licensing/Regulatory Information
1 .2 ) License to practice |
The skills and knowledge described in this unit require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. However other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships. Note: |
Pre-Requisites
Prerequisite Unit (s ) |
2 ) |
|
2 .1 ) Competencies |
||
Granting competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed. |
||
UEENEEJ111A |
Diagnose and rectify faults in air conditioning and refrigeration systems and components |
|
UEENEEJ113A |
Commission air conditioning and refrigeration systems |
|
UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
|
UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
|
UEENEEE003B |
Solve problems in extra-low voltage single path circuits |
|
UEENEEE105A |
Fix and secure electrotechnology equipment |
|
UEENEEE107A |
Use drawings, diagrams, schedules, standards, codes and specifications |
|
UEENEEE137A |
Document and apply measures to control OHS risks associated with electrotechnology work |
|
UEENEEJ102A |
Prepare and connect refrigerant tubing and fittings |
|
UEENEEJ103A |
Establish the basic operating conditions of vapour compression systems |
|
UEENEEJ104A |
Establish the basic operating conditions of air conditioning systems |
|
UEENEEJ106A |
Install refrigerant pipe work, flow controls and accessories |
|
UEENEEJ107A |
Install air conditioning and refrigeration systems, major components and associated equipment |
|
UEENEEJ108A |
Recover, pressure test, evacuate, charge and leak test refrigerants |
|
UEENEEJ110A |
Select refrigerant piping, accessories and associated controls |
|
UEENEEJ153A |
Find and rectify faults motors and associated controls in refrigeration and air conditioning systems |
|
UEENEEJ170A |
Diagnose and rectify faults in air conditioning and refrigeration control systems |
|
UEENEEJ194A |
Solve problems in low voltage refrigeration circuits |
|
UEENEEP012A |
Disconnect / reconnect composite appliances connected to low voltage installation wiring |
|
UEENEEP017A |
Locate and rectify faults in low voltage composite appliances using set procedures |
Employability Skills Information
Employability Skills |
3 ) This unit contains Employability Skills The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements. |
Elements and Performance Criteria Pre-Content
6 ) Elements describe the essential outcomes of a unit |
Performance criteria describe the required performance needed to demonstrate achievement of the element. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
||
1 |
Prepare to resolve problems in hydronic systems |
1.1 |
OHS procedures for a given work area are identified, identified, obtained and understood |
1.2 |
Established OHS risk control measures and procedures are followed in preparation for the work. |
||
1.3 |
Safety hazards which have not previously been identified are noted and established risk control measures are implemented. |
||
1.4 |
The nature of the problem is obtained from documentation or from work supervisor to establish the scope of work to be undertaken. |
||
1.5 |
Advice is sought from the work supervisor to ensure the work is coordinated effectively with others. |
||
1.6 |
Sources of materials that may be required for the work are accessed in accordance with established procedures. |
||
1.7 |
Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety |
||
2 |
Resolve problems in hydronic systems |
2.1 |
OHS risk control measures and procedures for carrying out the work are followed. |
2.2 |
The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures |
||
2.3 |
Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures |
||
2.4 |
Problems are approached methodically drawing on operational knowledge of hydronic systems using observation, measurement, calculations and comparison with normal operating values of system and components. |
||
2.5 |
Information needed to resolve problems is gathered and evaluated against normal operating parameters. Note: |
||
2.6 |
Problems are dealt with safely and with the approval of an authorised person. |
||
2.7 |
Problems are resolved without damage to apparatus, circuits, the surrounding environment or services and using sustainable energy practices. |
||
3 |
Complete work and document problem solving activities in hydronic systems |
3.1 |
OHS risk control work completion measures and procedures are followed. |
3.2 |
Work site is cleaned and made safe in accordance with established procedures. |
||
3.3 |
Justification for solutions used to resolve problems is documented |
||
3.4 |
Work completion is documented and an appropriate person or persons notified in accordance with established procedures |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
7) This describes the essential skills and knowledge and their level, required for this unit. |
Evidence shall show that knowledge has been acquired of safe working practices and solving problems in hydronic systems. All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies. KS01-EJ114A Hydronic systems Evidence shall show an understanding of hydronic systems used for refrigeration and/or air conditioning applications, applying safe working practices and relevant Standards, Codes and Regulations to an extent indicated by the following aspects: T1 System characteristics, design features, applications, construction, components and typical layout arrangements. T2 Operating and control principles T3 Maintenance schedules T4 System faults and testing methods |
Evidence Guide
EVIDENCE GUIDE |
||||
9 ) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. . The Evidence Guide forms an integral part of this Unit. It must be used in conjunction with all parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package. |
||||
Overview of Assessment |
9 .1 ) Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. In some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy. Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed. The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be 'rich' in nature to minimise error in judgment. Activities associated with normal everyday work influence decisions about how/how much the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package. |
|||
Critical aspects of evidence required to demonstrate competency in this unit |
9 .2 ) Before the critical aspects of evidence are considered all prerequisites must be met. |
|||
Evidence for competence in this unit shall be considered holistically. Each Element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:
|
||||
|
||||
|
||||
|
||||
A |
Using methodical fault finding techniques |
|||
B |
Assessing relevant information |
|||
C |
Solving problems effectively |
|||
D |
Providing written justification for the solutions used |
|||
E |
Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items |
|||
Note: |
||||
Context of and specific resources for assessment |
9 .3 ) This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:
These should be part of the formal learning/assessment environment. Note: Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy. |
|||
Evidence should show demonstrated competency in solving problems in hydronic systems. |
||||
Method of assessment |
9 .4 ) This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'. Note: |
|||
Concurrent assessment and relationship with other units |
9 .5 ) |
|||
For optimisation of training and assessment effort, competency development in this unit may be arranged concurrently with unit: |
||||
UEENEEJ111A |
Diagnose and rectify faults in air conditioning and refrigeration systems and components |
Range Statement
RANGE STATEMENT |
8 ) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance. |
This unit must be demonstrated in solving at least three operational problems related to hydronic systems. |
Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1. |
Unit Sector(s)
Not Applicable
Competency Field
2 .2 ) Literacy and numeracy skills Participants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 'Literacy and Numeracy' |
|||||
Reading |
3 |
Writing |
3 |
Numeracy |
3 |
Custom Content Section
Competency Field |
5 ) |
Refrigeration and Air Conditioning |