^

 
 

Unit of competency details

UEENEEE179A - Identify and select components, accessories and materials for energy sector work activities (Release 2)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by and equivalent to UEECD0021 - Identify and select components, accessories and materials for energy sector work activities 04/Oct/2020
Supersedes and is equivalent to UEENEEE079A - Identify and select components, accessories and materials for electrotechnology work activities 15/Mar/2012

Releases:
ReleaseRelease date
2 (this release) 14/Aug/2013
(View details for release 1) 16/Mar/2012

Qualifications that include this unit

CodeSort Table listing Qualifications that include this unit by the Code columnTitleSort Table listing Qualifications that include this unit by the Title columnUsage RecommendationRelease
UEE20911 - Certificate II in Electronic AssemblyCertificate II in Electronic AssemblySuperseded1-3 
UEE22111 - Certificate II in Sustainable Energy (Career Start)Certificate II in Sustainable Energy (Career Start)Superseded1-4 
UEE20511 - Certificate II in Computer Assembly and RepairCertificate II in Computer Assembly and RepairSuperseded1-3 
UEE10111 - Certificate I in ElectroComms SkillsCertificate I in ElectroComms SkillsSuperseded1-2 
UEE40111 - Certificate IV in Computer SystemsCertificate IV in Computer SystemsSuperseded1-4 
UEE30911 - Certificate III in Electronics and CommunicationsCertificate III in Electronics and CommunicationsSuperseded1-5 
UEE21911 - Certificate II in ElectronicsCertificate II in ElectronicsSuperseded1-3 
UEE31111 - Certificate III in Gaming ElectronicsCertificate III in Gaming ElectronicsDeleted1-4 
UEE30311 - Certificate III in Custom Electronics InstallationsCertificate III in Custom Electronics InstallationsSuperseded1-5 
UEE20811 - Certificate II in Electrical WholesalingCertificate II in Electrical WholesalingDeleted1-3 
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 21

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 031311 Powerline Installation And Maintenance  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 031311 Powerline Installation And Maintenance  07/Aug/2012 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not applicable.

Unit Descriptor

Unit Descriptor 

1) Scope: 

1.1) Descriptor 

This unit covers undertaking a schedule of work for selecting appropriately identified components, accessories or materials in an agreed time, to a quality standard and with a minimum of waste, using appropriate technology mediums where required.

Application of the Unit

Application of the Unit 

2) 

This competency standard is suitable for employment-based programs under an approved contract of training at the AQF level of the qualification in which the unit is first packaged or higher.

The unit may be selected as an elective from the relevant schedule (see qualification packaging rules) provided that all prerequisite units are undertaken or addressed through recognition processes.

This unit may be included in a skill set provided that it is listed in the schedule of electives (see Qualification Framework) and all prerequisite units are undertaken or addressed through recognition processes.

Delivery and assessment of this unit should be undertaken within regard to the requirements of License to Practice (1.2 above), Prerequisite Competencies and Literacy and Numeracy skills (2 above) and the recommendations for concurrent assessment and relationship with other units (9.5 below).

Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships.

Note:

1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control and lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.

2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting, risk safety measures etc.

Licensing/Regulatory Information

License to practice 

3)  

The skills and knowledge described in this unit do not require a license to practice in the workplace. However practice in this unit is subject to regulations directly related to occupational health and safe and contracts of training such as new apprenticeships.

Note:

1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, and power operated tools, vehicles, road signage and traffic control, lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.

2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting and risk safety measures

Pre-Requisites

Prerequisite Unit(s) 

4)  

Competencies 

4.1) 

Granting competency in this unit shall be made only after competency in the following unit has been confirmed.

UEENEEE101A

Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEE148A

Carry out routine work activities in an energy sector environment

Literacy and numeracy skills 

4.2)  

Participants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 ‘Literacy and Numeracy’

Reading

3

Writing

3

Numeracy

3

Employability Skills Information

Employability Skills 

5)  

This unit contains Employability Skills

The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.

Elements and Performance Criteria Pre-Content

6)  Elements describe the essential outcomes of a competency standard unit

Performance Criteria describe the required performance needed to demonstrate achievement of the element. Assessment of performance is to be consistent with the Evidence Guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1

Prepare to identify components, accessories and materials.

1.1

Instructions for preparing components, accessories or materials identification is communicated and confirmed to ensure clear understanding.

1.2

OHS policies and procedures are communicated and confirmed to ensure they are understood as they apply in the carrying out of the work.

1.3

Necessary tools, equipment and personnel protective equipment are identified, scheduled and checked to ensure they work correctly as intended and are safe to use in accordance with established procedures.

1.4

Appropriate personnel are consulted to ensure the work is coordinated effectively with others involved.

1.5

Resources and materials needed to do the work are confirmed, scheduled and obtained in accordance with established procedures.

1.6

Schedule(s) for identifying components, accessories or materials including practices for working safely are confirmed in accordance with instructions and requirements.

2

Select components, accessories and materials.

2.1

OHS policies and procedures and safe work practices are followed.

2.2

Schedule for selecting components, accessories or materials are followed to ensure work is completed in an agreed time, to a quality standard and with a minimum of waste, using appropriate technology.

2.3

Further instructions are sought from appropriate personnel in the event of unplanned happenings or conditions.

2.4

Ongoing checks of work quality are undertaken in accordance with instructions and requirements.

3

Confirm selection of components, accessories and materials.

3.1

Final checks are made to ensure selection of components, accessories or materials conforms to instructions.

3.2

Appropriate personnel are notified of completion of the selection process.

3.3

Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures.

3.4

Work area is cleaned up and made safe and sustainable energy practices are followed.

3.5

Appropriate records are updated in accordance with instructions and established procedures.

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

8)  This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices and identifying and selecting components/accessories/materials for energy sector work activities.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-EE179A Parts and components selection 

Evidence shall show an understanding of electrotechnology, parts and component selection to an extent indicated by the following aspects:

T1 Part and component identification encompassing:

  • Type, number and ratings of a range of typical components used in the electrotechnology and engineering industries

T2 Information about parts and components encompassing:

  • Catalogues
  • Computer access
  • Alternative parts
  • Telephone inquiry

Note: Examples of part identification and access may include: part codes, manufacturers and manufacturers supply outlets; availability and delivery times; price, including discounts, tax and delivery costs.

T3 Ordering procedures encompassing:

  • Customer approval
  • Supplier requirements
  • In-house requirements

T4 Receiving/dispatching procedures

  • Supplier requirements
  • In-house requirements
  • Handling and storage

Evidence Guide

EVIDENCE GUIDE 

9)  The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of the unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment 

9.1) 

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be ‘rich’ in nature to minimise error in judgment.

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit 

9.2) 

Before the critical aspects of evidence are considered all prerequisites must be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines – UEE11’. Evidence shall also comprise:

  • A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:
  • Implement Occupational Health and Safety workplace procedures and practices, including the use of risk control measures as specified in the performance criteria and range statement
  • Apply sustainable energy principles and practices as specified in the performance criteria and range statement
  • Demonstrate an understanding of the essential knowledge and associated skills as described in this unit. It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.
  • Demonstrate an appropriate level of skills enabling employment
  • Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures
  • Demonstrated consistent performance across a representative range of contexts from the prescribed items below:
  • Identify and select components/accessories/materials for energy sector work activities as described in 8) and including:

A

Understanding work instruction.

B

Obtaining and checking tools and equipment.

C

Following work schedules.

D

Returning tools and surplus resources as required.

E

Updating work records.

F

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in a holistic assessment with the above listed items.

Context of and specific resources for assessment 

9.3) 

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

  • OHS policy and work procedures and instructions.
  • Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed in this unit.

These should be used in the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions for assessment must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to identifying and selecting components/accessories/materials for energy sector work activities.

Method of assessment 

9.4) 

This unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’.

Note:

Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units 

9.5) 

For optimisation of training and assessment effort, competency development in this unit may be arranged concurrently with unit:

UEENEEE148A

Carry out routine work activities in an energy sector environment

Range Statement

RANGE STATEMENT 

10)  This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit shall be demonstrated in relation to identifying and selecting components/accessories/materials for energy sector work activities in any of the following disciplines:

  • Appliances
  • Business equipment
  • Computers
  • Data Communications
  • Electrical
  • Electrical Machines
  • Electronics
  • Fire protection
  • Instrumentation
  • Refrigeration and Air Conditioning
  • Renewable / sustainable energy, and
  • Security technology

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.2

Unit Sector(s)

Not applicable.

Competency Field

Competency Field 

11)  

Electrotechnology