Modification History
Not Applicable
Unit Descriptor
Unit Descriptor |
1 ) 1 .1 ) Descriptor |
This unit specifies the mandatory requirements of occupational health and safety and how they apply to the various electrotechnology work functions. It encompasses responsibilities for health and safety, risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work. |
Application of the Unit
Not Applicable
Licensing/Regulatory Information
1 .2 ) License to practice |
During Training : Competency development activities are subject to regulations directly related to licencing, occupational health and safety and where applicable contracts of training such as apprenticeships. In the workplace : The application of the skills and knowledge described in this unit require a license to practice in the workplace where work is carried out on electrical equipment or installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c. Other conditions may apply under State and Territory legislative and regulatory requirements. |
Pre-Requisites
Prerequisite Unit (s ) |
2 ) |
2 .1 ) Competencies |
|
There are no prerequisite competencies for this unit. |
Employability Skills Information
Employability Skills |
3 ) This unit contains Employability Skills The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements. |
Application of the Unit |
4 ) |
This unit addresses information, processes and techniques for the application of general occupational health and safety requirements in workplaces and is essential for employees without managerial or supervisory responsibilities |
Elements and Performance Criteria Pre-Content
6 ) Elements describe the essential outcomes of a unit of competency |
Performance criteria describe the required performance needed to demonstrate achievement of the Element. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
||
1 |
Prepare to enter a work area |
1.1 |
Work area access permits are obtained from appropriate personnel according to established procedures |
1.2 |
Safe work methods for controlling risk obtained, read and understood prior to undertaking a work activity. |
||
1.3. |
Preparations for electrical and non-electrical isolation are carried out to prevent creation of hazards from loss of machine/system/process control according to established procedures. |
||
1.4 |
Tools and equipment needed for the work are checked for safety and correct functionality according to established procedures and regulatory requirements. |
||
2 |
Apply safe working practices. |
2.1 |
Safe work methods for controlling risk are followed accurately. |
2.2 |
Workplace procedures for dealing with accidents, fires and emergencies are followed according to work procedures and scope of responsibility and competencies. |
||
3. |
Follow workplace procedures for hazard identification and risk control |
3.1 |
Hazards are identified and control measures implemented and monitored through active participation in the consultation process with employer and other employees. |
3.2 |
Hazards in the work area are recognised and reported to appropriate personnel according to established procedures. |
||
3.3 |
OHS records of incidents are completed in accordance with regulatory requirements and established procedures. |
||
3.4 |
Workplace instructions and training are followed accurately within established procedures. |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
7) This describes the essential skills and knowledge and their level, required for this unit. |
Evidence shall show that knowledge has been acquired of safe working practices and applying OHS practices in the workplace. The knowledge and skills shall be contextualised to current industry standards, technologies and practices. KS01-EE101A Occupational Health and Safety principles Evidence shall show an understanding of Occupational Health and Safety to an extent indicated by the following aspects T1 The basic legal requirements covering occupational health and safety in the workplace encompassing:
T2 The work environment encompassing:
T3 Manual Handling encompassing:
T4 Chemicals in the workplace encompassing:
T5 Working at heights encompassing:
T6 Confined spaces encompassing:
T7 Physical and psychological hazards encompassing:
T8 Working safely with electricity encompassing:
T9 Life support - CPR in the workplace encompassing:
|
Evidence Guide
EVIDENCE GUIDE |
||||
9 ) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of the unit and performed in accordance with the Assessment Guidelines of this Training Package. |
||||
Overview of Assessment |
9 .1 ) Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy. Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed. The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be 'rich' in nature to minimise error in judgment. Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package. |
|||
Critical aspects of evidence required to demonstrate competency in this unit |
9 .2 ) Before the critical aspects of evidence are considered all prerequisites must be met. |
|||
Evidence for competence in this unit shall be considered holistically. Each element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:
|
||||
|
||||
|
||||
|
||||
|
||||
A |
Preparing to enter the workplace including, the use of work permits and clearances and isolation permissions. |
|||
B |
Understanding and following risk control safe work methods. |
|||
C |
Applying work procedures and instructions as they apply to risk control measures. |
|||
D |
Dealing with accidents and emergencies within the scope of responsibility. |
|||
E |
Participation in consultation processes, identifying hazards and implementing and monitoring control measures. |
|||
F |
Dealing with unplanned events |
|||
Note: |
||||
Context of and specific resources for assessment |
9 .3 ) This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:
These should be used in the formal learning/assessment environment. Note: Where simulation is considered a suitable strategy for assessment, conditions for assessment must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy. |
|||
The resources used for assessment should reflect current industry practices in relation to applying OHS practices in the workplace. |
||||
Method of assessment |
9 .4 ) This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'. Note: |
|||
Concurrent assessment and relationship with other units |
9 .5 ) |
|||
This unit shall be assessed concurrently, as it relates to other units undertaken in a possible skill clusters or qualification. Components of this unit are included in the critical aspects of evidence of all units to help ensure the appropriate level of responsibility for safety has been acquired |
Range Statement
RANGE STATEMENT |
8 ) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance. |
This unit shall be demonstrated in relation to each of the following
|
Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1. |
Unit Sector(s)
Not Applicable
Competency Field
2 .2 ) Literacy and numeracy skills Participants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 'Literacy and Numeracy' |
|||||
Reading |
3 |
Writing |
3 |
Numeracy |
3 |
Custom Content Section
Competency Field |
5 ) |
Electrotechnology |