^

 
 

Unit of competency details

UEENEEE023B - Solve basic problems in electronic and digital equipment (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Supersedes and is equivalent to UEENEEE023A - Solve basic problems in electronic and digital equipmentPart - Refer Note 1 (below). 28/Jul/2011
Is superseded by and equivalent to UEENEEE123A - Solve basic problems electronic and digital equipment and circuits 15/Mar/2012

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 29/Jul/2011

Training packages that include this unit

Qualifications that include this unit

CodeTitleRelease
UEE60410 - Advanced Diploma of Computer Systems EngineeringAdvanced Diploma of Computer Systems Engineering
UEE60210 - Advanced Diploma of Electronics and Communications EngineeringAdvanced Diploma of Electronics and Communications Engineering
UEE50510 - Diploma of Electronics and Communications EngineeringDiploma of Electronics and Communications Engineering
UEE50110 - Diploma of Computer Systems EngineeringDiploma of Computer Systems Engineering
UEE41510 - Certificate IV in Video and Audio SystemsCertificate IV in Video and Audio Systems
UEE40710 - Certificate IV in Electronics and CommunicationsCertificate IV in Electronics and Communications
UEE40110 - Certificate IV in Computer SystemsCertificate IV in Computer Systems
UEE30910 - Certificate III in Electronics and CommunicationsCertificate III in Electronics and Communications
UEE30310 - Certificate III in Custom Electronics InstallationsCertificate III in Custom Electronics Installations
UEE30210 - Certificate III in Computer Systems EquipmentCertificate III in Computer Systems Equipment
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 11

Accredited courses that have this unit in the completion mapping

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 031313 Electrical Fitting, Electrical Mechanics  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 031313 Electrical Fitting, Electrical Mechanics  03/Sep/2008 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Unit Descriptor

Unit Descriptor 

)

.) Descriptor 

This unit covers determining correct operation of basic electronic and digital equipment and providing solutions as they apply to various electronic and computer work functions. It encompasses working safely, problem solving procedures, including the use of basic measuring devices, providing solutions derived from equipment behaviour and measurements to predictable problems.

Application of the Unit

Application of the Unit 

)

This unit is intended for competency development entry-level employment based programs incorporated in approved contracts of training.

Licensing/Regulatory Information

.) License to practice 

The skills and knowledge described in this unit do not require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships.

Pre-Requisites

Prerequisite Unit ()

)

.) Competencies 

There are no prerequisite competencies for this unit.

Employability Skills Information

Employability Skills 

)

This unit contains Employability Skills

The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.

Elements and Performance Criteria Pre-Content

) Elements describe the essential outcomes of a unit of competency

Performance criteria describe the required performance needed to demonstrate achievement of the Element. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1

Prepare to work electronic and digital equipment.

1.1

OHS procedures for a given work area are identified, obtained and understood.

1.2

OHS risk control work preparation measures and procedures are followed.

1.3

The nature of the problem is obtained from documentation or from work supervisor to establish the scope of work to be undertaken.

1.4

Advice is sought from the work supervisor to ensure the work is coordinated effectively with others.

1.5

Sources of materials that may be required for the work are identified and accessed in accordance with established procedures.

1.6

Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.

2

Solve electronic and digital equipment problems.

2.1

OHS risk control work measures and procedures are followed.

2.2

The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.

2.3

Circuits are checked as being isolated where necessary in strict accordance OHS requirements and procedures.

2.4

Established methods are used to solve electronic and digital equipment problems from observation or equipment behaviour and measured values.

2.5

Unexpected situations are dealt with safely and with the approval of an authorised person.

2.6

Problems are solved without damage to apparatus, circuits, the surrounding environment or services and using sustainable energy practices.

3

Complete work and document problem solving activities.

3.1

OHS work completion risk control measures and procedures are followed.

3.2

Work site is cleaned and made safe in accordance with established procedures.

3.3

Justification for solutions used to solve circuit problems is documented.

3.4

Work completion is documented and appropriate person(s) notified in accordance with established procedures.

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices and solving problems in electronic and digital equipment.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit.

2.9.1.5

Basic electronic principles

2.9.1.6

Basic digital principles

2.18.1

Occupational Health and Safety principles

Evidence Guide

EVIDENCE GUIDE 

) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of the unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment 

.)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be 'rich' in nature to minimise error in judgment.

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit 

.)

Before the critical aspects of evidence are considered all prerequisites must be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:

  • A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

  • Implement Occupational Health and Safety workplace procedures and practices, including the use of risk control measures as specified in the performance criteria and range statement
  • Apply sustainable energy principles and practices as specified in the performance criteria and range statement
  • Demonstrate an understanding of the essential knowledge and associated skills as described in this unit. It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.
  • Demonstrate an appropriate level of skills enabling employment
  • Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

  • Demonstrated consistent performance across a representative range of contexts from the prescribed items below:

  • Solving problems in electronic and digital equipment as described in 8) and including:

A

Using methodical problem solving methods.

B

Taking and recording measurements correctly and accurately using relevant measuring equipment.

C

Deducing equipment behaviour correctly and accurately.

E

Providing written justification for the solutions to problems.

D

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in a holistic assessment with the above listed items.

Context of and specific resources for assessment 

.)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

  • OHS policy and work procedures and instructions.
  • Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed in this unit.

These should be used in the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions for assessment must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to solving basic problems electronic and digital equipment.

Method of assessment 

.)

This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units 

.)

There are no concurrent assessment recommendations for this unit.

The critical aspects of occupational health and safety covered in unit UEENEEE001B and other discipline specific occupational health and safety units shall be incorporated in relation to this unit.

Range Statement

RANGE STATEMENT 

) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit shall be demonstrated in relation to:

  • Electronic and digital equipment problems as they apply to setting-up, fault finding, maintenance or development work functions in any of the following disciplines:

  • Computers
  • Data Communications
  • Electronics, and

  • In relation to the following types of electronic and digital equipment problems

  • Determining the operating parameters of existing operating equipment
  • Alternating existing equipment to comply with specified operating parameters.

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.

Unit Sector(s)

Not Applicable

Competency Field

.) Literacy and numeracy skills 

Participants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 'Literacy and Numeracy'

Reading

3

Writing

3

Numeracy

3

Custom Content Section

Competency Field 

)

Electrotechnology