^

 
 

Unit of competency details

UEENEED004B - Use engineering applications software (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Supersedes and is equivalent to UEENEED004A - Use engineering applications softwarePart - Refer Note 1 (below). 20/Jul/2011
Is superseded by and equivalent to UEENEED104A - Use engineering applications software on personal computers 15/Mar/2012

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 21/Jul/2011

Training packages that include this unit

Qualifications that include this unit

CodeTitleRelease
UET60109 - Advanced Diploma of ESI - Power SystemsAdvanced Diploma of ESI - Power Systems
UET50109 - Diploma of ESI - Power SystemsDiploma of ESI - Power Systems
UEE62511 - Advanced Diploma of Air-conditioning and Refrigeration EngineeringAdvanced Diploma of Air-conditioning and Refrigeration Engineering
UEE62411 - Advanced Diploma of Engineering Technology - Air-conditioning and RefrigerationAdvanced Diploma of Engineering Technology - Air-conditioning and Refrigeration
UEE62311 - Advanced Diploma of Electrical Engineering - Coal MiningAdvanced Diploma of Electrical Engineering - Coal Mining
UEE62211 - Advanced Diploma of Electrical - EngineeringAdvanced Diploma of Electrical - Engineering
UEE61810 - Advanced Diploma of Engineering Technology - Computer SystemsAdvanced Diploma of Engineering Technology - Computer Systems
UEE61710 - Advanced Diploma of Engineering Technology - ElectronicAdvanced Diploma of Engineering Technology - Electronic
UEE60410 - Advanced Diploma of Computer Systems EngineeringAdvanced Diploma of Computer Systems Engineering
UEE60210 - Advanced Diploma of Electronics and Communications EngineeringAdvanced Diploma of Electronics and Communications Engineering
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 21

Accredited courses that have this unit in the completion mapping

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 080905 Practical Computing Skills  

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 080905 Practical Computing Skills  03/Sep/2008 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not Applicable

Unit Descriptor

Unit Descriptor 

)

.) Descriptor 

This unit covers the use of computer application relevant to engineering support work functions. It encompasses applying user preferences, using application menus and tools, entering and retrieve information, working with groups and transferring and printing files.

Note:

Examples of engineering application software are Visio, Electronic Work Bench, LabView

Application of the Unit

Application of the Unit 

)

This unit is intended for competency development entry-level employment-based programs incorporated in approved contracts of training. It may be used to augment previously acquired competencies.

Licensing/Regulatory Information

.) License to practice 

The skills and knowledge described in this unit do not require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships.

Pre-Requisites

Prerequisite Unit ()

)

.) Competencies 

There are no prerequisite competencies for this unit.

Employability Skills Information

Employability Skills 

)

The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.

Elements and Performance Criteria Pre-Content

) Elements describe the essential outcomes of a unit of competency

Performance criteria describe the required performance needed to demonstrate achievement of the Element. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1

Prepare to use computer applications.

1.1

OHS procedures for a given work area are identified, obtained and understood through established routines and procedures.

1.2

Established OHS risk control measures and procedures in relation to computer and keyboard use are followed.

1.3

Application software and information required for use is obtained from appropriate sources.

1.4

On-screen instructions in relation to any anomaly such as a virus warning are followed.

1.5

Help menu is used to resolve any straightforward start up or access issues or anomalies.

2

Use engineering application software.

2.1

Established OHS risk control measures and procedures for carrying out the work are followed.

2.2

Techniques that apply to a particular software package are used to produce appropriate files.

2.3

Routine checks are made to ensure accuracy of information in accordance with quality requirements.

3

Output information from an application.

3.1

Completed files are stored appropriately in accordance with enterprise requirements.

3.2

Files are printed for formal records and/or forwarded to others.

4

Shut down computer.

4.1

Files are named, arranged, saved and backed up in accordance with enterprise requirements.

4.2

Computer shutdown procedures are followed and computer switched off.

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices using engineering application software.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit.

2.4.16

Personal computers, engineering applications software basic

2.18.1

Occupational Health and Safety principles

Evidence Guide

EVIDENCE GUIDE 

) This provides essential advice for assessment of the unit and must be read in conjunction with the performance criteria and the range statement of the unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment 

.)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be 'rich' in nature to minimise error in judgment.

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit 

.)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:

  • A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

  • Implement Occupational Health and Safety workplace procedures and practices, including the use of risk control measures as specified in the performance criteria and range statement
  • Apply sustainable energy principles and practices as specified in the performance criteria and range statement
  • Demonstrate an understanding of the essential knowledge and associated skills as described in this unit. It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.
  • Demonstrate an appropriate level of skills enabling employment
  • Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

  • Demonstrated consistent performance across a representative range of contexts from the prescribed items below:

  • Use engineering applications software as described in 8) and including:

A

Following application instructions to input and output information.

B

Storing information appropriately.

C

Outputting information to a printer.

D

Transferring information between systems.

E

Saving, storing and backing up files for effective retrieval by others.

F

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in a holistic assessment with the above listed items.

Note:
Successful completion of relevant vendor training may be used to contribute to evidence on which competency is deemed. In these cases the alignment of outcomes of vendor training with performance criteria and critical aspects of evidence shall be clearly identified.

Context of and specific resources for assessment 

.)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

  • OHS policy and work procedures and instructions.
  • Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed in this unit.

These should be used in the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions for assessment must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to using engineering application software.

Method of assessment 

.)

This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires assessment in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units 

.)

There are no concurrent assessment recommendations for this unit.

Range Statement

RANGE STATEMENT 

) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit shall be demonstrated in relation to using at least two of the following types of engineering applications at a basic level.

  • Office Applications
  • Computer Aided Design
  • Engineering data analysis software
  • Engineering modelling
  • Project management

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.

Unit Sector(s)

Not Applicable

Competency Field

.) Literacy and numeracy skills 

Participants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 'Literacy and Numeracy'

Reading

3

Writing

3

Numeracy

3

2.2) Literacy and numeracy skills

Competency Field 

)

Computer Systems