^

 
 

Qualification details

UEE63011 - Advanced Diploma of Electrical Systems Engineering (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by UEE63020 - Advanced Diploma of Electrical Systems Engineering 04/Oct/2020

Releases:
ReleaseRelease date
(View details for release 4) 17/Apr/2014
(View details for release 3) 14/Aug/2013
(View details for release 2) 06/Mar/2013
1 (this release) 16/Mar/2012

Replaced release

You are currently viewing the components related to release 1.
The current release is release 4View release 4 details.

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnUsage RecommendationSort Table listing Units of Competency by the Usage Recommendation columnEssentialSort Table listing Units of Competency by the Essential column
UEENEEG182A - Supply effective and efficient lighting products for domestic and small commercial applicationsSupply effective and efficient lighting products for domestic and small commercial applicationsSupersededN/A
UEENEEE101A - Apply Occupational Health and Safety regulations, codes and practices in the workplaceApply Occupational Health and Safety regulations, codes and practices in the workplaceSupersededN/A
UEENEEK151A - Develop effective engineering strategies for energy reduction in buildingsDevelop effective engineering strategies for energy reduction in buildingsSupersededN/A
BSBMGT502B - Manage people performanceManage people performanceSupersededN/A
UEENEEE125A - Provide engineering solutions for problems in complex multiple path circuitsProvide engineering solutions for problems in complex multiple path circuitsSupersededN/A
UEENEED104A - Use engineering applications software on personal computersUse engineering applications software on personal computersSupersededN/A
UEENEEI128A - Set up and configure controls on complex fluid systemsSet up and configure controls on complex fluid systemsDeletedN/A
UEENEEM065A - Conduct audit of hazardous areas installations - gas atmospheresConduct audit of hazardous areas installations - gas atmospheresDeletedN/A
UEENEEE137A - Document and apply measures to control OHS risks associated with electrotechnology workDocument and apply measures to control OHS risks associated with electrotechnology workSupersededN/A
UEENEEG106A - Terminate cables, cords and accessories for low voltage circuitsTerminate cables, cords and accessories for low voltage circuitsSupersededN/A
Items per page 10 | 20 | 50 | 100
Displaying items 71 - 80 of 186

Classifications

SchemeCodeClassification value
ANZSCO Identifier 312312 Electrical Engineering Technician 
ASCO (occupation type) Identifier 3123-11 Electrical Engineering Associate 
ASCED Qualification/Course Field of Education Identifier 0313 Electrical And Electronic Engineering And Technology 
Qualification/Course Level of Education Identifier 411 Advanced Diploma 
Taxonomy - Industry Sector N/A Systems Electrics 
Taxonomy - Occupation N/A Senior Technical Officer (Electrical Engineering),Senior Technical Officer (Automated Systems Maintenance),Senior Technical Officer (Electrical Maintenance) 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 312312 Electrical Engineering Technician 07/Aug/2012 
ASCO (occupation type) Identifier 3123-11 Electrical Engineering Associate 07/Aug/2012 
ASCED Qualification/Course Field of Education Identifier 0313 Electrical And Electronic Engineering And Technology 07/Aug/2012 
Qualification/Course Level of Education Identifier 411 Advanced Diploma 16/Mar/2012 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not applicable.

Description

Scope 

This qualification provides competencies to develop, design and validate/evaluate, select, commission, maintain and diagnose faults/malfunctions on advanced electrical equipment and systems. Also, provides skills to manage risk, estimate and manage projects and provide technical advice/sales.

It develops competencies in the ethical and responsible application of mathematics, science, engineering techniques, Standards and Codes of Practice, engineering design practices, supervision and management of physical, human and financial resources in engineering.

Pathways Information

Not applicable.

Licensing/Regulatory Information

Not applicable.

Entry Requirements

Not applicable.

Employability Skills Summary

Not applicable.

Packaging Rules

Completion requirements 

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

  • All the Core competency standard units, defined in the Core Competency Standard Units table below and
  • A combination of Elective competency standard units to achieve a total weighting of 580 points in accordance with the Elective Competency Standard Units table below.

Note: UEENEEG199A - Those holding an ‘Unrestricted Electrical Fitter Licence or equivalent issued in an Australian State or Territory meet the requirements of this unit and its pre-requisite requirements.

Core Competency Standard Units  

All Core competency standard units to be achieved

Weighting Points 

UEENEED104A

Use software for engineering applications

40

UEENEEE006B

Apply methods to maintain currency of industry developments

20

UEENEEE011C

Manage risk in electrotechnology activities

60

UEENEEE015B

Develop design briefs for electrotechnology projects

40

UEENEEE071B

Write specifications for electrical engineering projects

40

UEENEEE080A

Apply industry and community standards to engineering activities

20

UEENEEE081A

Apply material science to solving electrotechnology engineering problems

60

UEENEEE082A

Apply physics to solving electrotechnology engineering problems

60

UEENEEE083A

Establish and follow a competency development plan in an electrotechnology engineering discipline

120

UEENEEE101A

Apply Occupational Health and Safety regulations, codes and practices in the workplace

20

UEENEEE102A

Fabricate, assemble and dismantle utilities industry components

40

UEENEEE104A

Solve problems in d.c. circuits

80

UEENEEE105A

Fix and secure electrotechnology equipment

20

UEENEEE107A

Use drawings, diagrams, schedules, standards, codes and specifications

40

UEENEEE117A

Implement and monitor energy sector OHS policies and procedures

20

UEENEEE124A

Compile and produce an energy sector detailed report

60

UEENEEE125A

Provide engineering solutions for problems in complex multiple path circuits

60

UEENEEE126A

Provide solutions to basic engineering computational problems

60

UEENEEE137A

Document and apply measures to control OHS risks associated with electrotechnology work

20

UEENEEG006A

Solve problems in single and three phase low voltage machines

80

UEENEEG033A

Solve problems in single and three phase low voltage electrical apparatus and circuits

60

UEENEEG063A

Arrange circuits, control and protection for general electrical installations

40

UEENEEG101A

Solve problems in electromagnetic devices and related circuits

60

UEENEEG102A

Solve problems in low voltage a.c. circuits

80

UEENEEG106A

Terminate cables, cords and accessories for low voltage circuits

40

UEENEEG108A

Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

40

UEENEEG109A

Develop and connect electrical control circuits

80

UEENEEG149A

Provide engineering solutions to problems in complex polyphase power circuits

60

UEENEEG169A

Manage large electrical projects

40

UEENEEG170A

Plan large electrical projects

60

UEENEEG199A

Verify compliance and functionality of existing circuits

40

UEENEEK132A

Develop energy sector strategies to address environmental and sustainability issues

20

Total points in core 

1580 

Elective Competency Standard Units 

Complete Elective units to achieve a total of weighting of 580 points from the following groups:

Group 

Minimum points 

Maximum points 

A 

Imported and Common Elective Units 

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 6. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

0

220

B 

Qualification Elective Units 

0

160

C 

Qualification Elective Units 

0

160

D 

Qualification Elective Units 

0

160

E 

Qualification Elective Units 

You may select the majority of your elective units from this Group

200

580

Group A – Imported and Common Electives Units 

You may complete units to a maximum weighting of 220

Weighting Points 

BSBMGT502B

Manage people performance

70

BSBINM501A

Manage an information or knowledge management system

50

BSBMGT516C

Facilitate continuous improvement

60

BSBINN502A

Build and sustain an innovative work environment

50

BSBWOR502B

Ensure team effectiveness

60

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 6. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework

Up to 220 points

Group B – Qualification Elective Units  

You may complete units to a maximum weighting of 160

Weighting Points 

UEENEEA110A

Assemble, mount and connect control gear and switchgear

40

UEENEEA112A

Fabricate and assemble bus bars

40

UEENEEA113A

Mount and wire control panel equipment

40

UEENEEG107A

Select wiring systems and cables for low voltage general electrical installations

60

UEENEEG110A

Diagnose and rectify faults in d.c. electrical apparatus and circuits

60

UEENEEG111A

Carry out repairs to electrical apparatus

40

UEENEEG116A

Diagnose and rectify faults in lifts/escalator systems

80

UEENEEG118A

Maintain operation of electrical mining equipment and systems

60

UEENEEG119A

Maintain the operation of electrical marine equipment and systems

60

UEENEEG120A

Select and arrange circuits and equipment for special electrical installations

60

UEENEEG129A

Overhaul and repair switchgear and controlgear

60

UEENEEG150A

Wind electrical coils

40

UEENEEG151A

Place and connect electrical coils

40

UEENEEG152A

Rewind single phase machines

40

UEENEEG153A

Rewind LV three phase induction machines rated for low voltage

60

UEENEEG154A

Rewind LV direct current machines

60

UEENEEG157A

Conduct electrical tests on LV electrical machines

40

UEENEEG159A

Conduct mechanical tests of LV electrical machines

40

UEENEEG164A

Repair mechanical and electrical components of electrical machines

40

UEENEEG165A

Maintain and service electrical traction lifts

40

UEENEEG166A

Installation and maintenance of escalators, tread ways and moving walks

40

UEENEEG167A

Align and install lift components and equipment

20

UEENEEG171A

Install, set up and commission interval metering

20

UEENEEG181A

Provide advice on effective and energy efficient lighting products

20

UEENEEG182A

Supply effective and efficient lighting products for domestic and small commercial applications

40

UEENEEG183A

Provide advice on the application of energy efficient lighting for ambient and aesthetic effect

20

UEENEEG189A

Install and maintain emergency lighting systems

40

UEENEEH102A

Repair basic electronic apparatus faults by replacement of components

40

UEENEEH111A

Troubleshoot single phase input d.c. power supplies

40

UEENEEH150A

Assemble and set up basic wired and wireless security systems

80

UEENEEI101A

Use instrumentation drawings, specifications, standards and equipment manuals

40

UEENEEI102A

Solve problems in pressure measurement circuits and systems

40

UEENEEI103A

Solve problems in density/level measurement circuits and systems

40

UEENEEI104A

Solve problems in flow measurement circuits and systems

40

UEENEEI105A

Solve problems in temperature measurement circuits and systems

40

UEENEEI116A

Enter and verify operating instructions in microprocessor equipped devices

20

UEENEEI138A

Provide solutions to extra low voltage (ELV) electro-pneumatic control systems and drives

60

UEENEEI140A

Plan the electrical installation of integrated systems

20

UEENEEI141A

Develop electrical integrated systems

20

UEENEEI150A

Develop, enter and verify discrete control programs for programmable controllers

60

UEENEEJ102A

Prepare and connect refrigerant tubing and fittings

30

UEENEEJ103A

Establish the basic operating conditions of vapour compression systems

60

UEENEEJ104A

Establish the basic operating conditions of air conditioning systems

20

UEENEEM019A

Attend to breakdowns in hazardous areas — coal mining

20

UEENEEM020A

Attend to breakdowns in hazardous areas — gas atmospheres

20

UEENEEM021A

Attend to breakdowns in hazardous areas — dust atmospheres

20

UEENEEM022A

Attend to breakdowns in hazardous areas — pressurisation

20

UEENEEM027A

Maintain equipment in hazardous areas — coal mining

60

UEENEEM028A

Maintain equipment in hazardous areas — gas atmospheres

60

UEENEEM029A

Maintain equipment in hazardous areas — dust atmospheres

60

UEENEEM030A

Maintain equipment in hazardous areas — pressurisation

60

UEENEEM038A

Conduct testing of hazardous areas installations — coal mining

40

UEENEEM080A

Report on the integrity of explosion-protected equipment in hazardous area

20

Group C – Qualification Elective Units  

You may complete units to a maximum weighting of 160

Weighting Points 

UEENEEC005B

Estimate electrotechnology projects

40

UEENEEG125A

Plan LV electrical installations with a demand up to 400A per phase

40

UEENEEG128A

Plan layouts for electrical switchboards and control panels

40

UEENEEG155A

Rewind three phase induction machines rated for HV to 3.3 kV

60

UEENEEG156A

Rewind three phase induction machines rated for HV above 3.3 kV

60

UEENEEG158A

Conduct electrical tests on HV electrical machines

60

UEENEEG162A

Set up and place LV electrical apparatus and associated circuits into service

40

UEENEEG168A

Diagnose and rectify faults in complex lifts equipment and systems

40

UEENEEG172A

Investigate and produce reports on electrical incidents

60

UEENEEG175A

Develop compliance policies and plans to conduct a electrical contracting business

80

UEENEEG179A

Develop detailed electrical drawings

60

UEENEEG184A

Provide photometric data for illumination system design

60

UEENEEG185A

Select effective and efficient light sources and luminaires for given locations and designs

60

UEENEEG186A

Design effective and efficient lighting for residential and commercial buildings

20

UEENEEG188A

Prepare quotations for the supply of effective and efficient lighting products for lighting projects

20

UEENEEI119A

Set up transducers and field control devices

60

UEENEEI120A

Provide solutions to problems in industrial control systems

60

UEENEEI124B

Diagnose and rectify faults in electronic control systems

60

UEENEEI125A

Provide solutions to fluid circuit operations

60

UEENEEI126A

Provide solutions to pneumatic/hydraulic system operations

80

UEENEEI139A

Diagnose and rectify faults in digital controls systems

60

UEENEEI142A

Develop an electrical integrated system interface for access through a touch screen

20

UEENEEI143A

Develop access control of electrical integrated systems using logic-based programming tools

20

UEENEEI144A

Develop interfaces for multiple access methods to monitor, schedule and control an electrical integrated system

20

UEENEEI148A

Provide solutions to single phase electronic power control problems

60

UEENEEI149A

Provide solutions to polyphase electronic power control problems

60

UEENEEI151A

Develop, enter and verify programs for industrial control systems using high level instructions

60

UEENEEI152A

Develop, enter and verify programs in Supervisory Control and Data Acquisition systems

60

UEENEEI155A

Develop structured programs to control external devices

40

UEENEEM039A

Conduct testing of hazardous area installations — gas atmospheres

40

UEENEEM042A

Conduct visual inspection of hazardous areas installations

40

UEENEEM044A

Conduct detailed inspection of hazardous areas installations — gas atmospheres

40

UEENEEM047A

Develop and manage maintenance programs for hazardous areas electrical equipment — coal mining

20

UEENEEM078A

Manage compliance of hazardous areas

20

Group D – Qualification Elective Units 

You may complete units to a maximum weighting of 160

Weighting Points 

UEENEEC006B

Prepare tender submissions for electrotechnology projects

60

UEENEEE110A

Develop and implement energy sector maintenance programs

60

UEENEEG127A

Design LV electrical installations with a demand greater than 400 A per phase

40

UEENEEG131A

Evaluate performance of LV electrical apparatus

40

UEENEEG180A

Develop detailed and complex drawings for electrical systems using CAD systems

60

UEENEEG187A

Design effective and efficient lighting for public, open and sports areas

20

UEENEEI127A

Analyse complex electronic circuits controlling fluids

80

UEENEEI145A

Diagnose and rectify faults in a.c. motor drive systems

60

UEENEEI146A

Diagnose and rectify faults in d.c. motor drive systems

60

UEENEEI147A

Diagnose and rectify faults in servo drive systems

60

UEENEEI156A

Develop and test code for microcontroller devices

60

UEENEEI157A

Configure and maintain industrial control system networks

60

UEENEEK129A

Design renewable energy (RE) heating systems

120

UEENEEK131A

Design wind energy conversion systems (WECS) rated to 10 kW.

60

UEENEEK138A

Design micro-hydro power systems

60

UEENEEM035A

Conduct a conformity assessment of explosion-protected equipment — coal mining

40

UEENEEM036A

Conduct a conformity assessment of explosion-protected equipment — gas atmospheres

40

UEENEEM037A

Conduct a conformity assessment of explosion-protected equipment — dust atmospheres

40

UEENEEM054A

Plan electrical installations for hazardous areas — gas atmospheres

20

UEENEEM064A

Conduct audit of hazardous areas installations — coal mining

60

UEENEEM065A

Conduct audit of hazardous areas installations — gas atmospheres

60

UEENEEM066A

Conduct audit of hazardous areas installations — dust atmospheres

60

UEENEEM067A

Assess the fitness-for-purpose of hazardous areas explosion-protected equipment — coal mining

60

UEENEEM068A

Assess the fitness-for-purpose of hazardous areas explosion-protected equipment — gas atmospheres

60

UEENEEM069A

Assess the fitness-for-purpose of hazardous areas explosion-protected equipment — dust atmospheres

60

Group E – Qualification Elective Units 

You must complete units to a minimum weighting of 200

You may select all your elective units from this Group

Weighting Points 

UEENEEC007B

Manage contract variations

40

UEENEEE127A

Use advanced computational processes to provide solutions to engineering problems

80

UEENEEE128A

Develop engineering solutions to photonic problems

80

UEENEEE160A

Provide engineering solutions for uses of materials and thermodynamic effects

80

UEENEEE161A

Analyse static and dynamic parameters of electrotechnology/utilities equipment

80

UEENEEE162A

Select drive components for equipment design

80

UEENEEE163A

Analyse materials for suitability in electrotechnology/utilities equipment

80

UEENEEE164A

Design electrical machine drives and production layout plans

80

UEENEEE078B

Contribute to risk management in electrotechnology systems

20

UEENEEG130A

Design electrical switchboards rated for high fault levels

60

UEENEEG143A

Develop engineering solutions for synchronous machine problems

60

UEENEEG144A

Develop engineering solutions for direct current machine problems

60

UEENEEG145A

Develop engineering solutions for induction machine problems

60

UEENEEG160A

Evaluate performance of LV electrical machines

40

UEENEEG161A

Design and develop modifications for electrical machines

60

UEENEEH147A

Assess compliance of electronic apparatus

60

UEENEEH184A

Modify DSP based sub-systems

80

UEENEEH185A

Design a signal-conditioning subsystem

80

UEENEEH188A

Design and develop electronics/computer systems projects

40

UEENEEI123A

Design electronic control and instrumentation systems

60

UEENEEI128A

Set up controls on complex fluid systems

80

UEENEEI129A

Set up electronically controlled mechanically operated complex systems

80

UEENEEI130A

Set up electronically controlled robotically operated complex systems

80

UEENEEI153A

Design and configure Human-Machine Interface (HMI) networks

60

UEENEEI154A

Design a computer based control system

120

UEENEEK133A

Design hybrid renewable power systems

80

UEENEEK139A

Design stand-alone renewable energy power systems

40

UEENEEK140A

Develop engineering solutions to renewable energy problems

60

UEENEEK146A

Design energy management controls systems for electrical installations in buildings

80

UEENEEK151A

Develop engineering strategies for energy reduction in buildings

60

UEENEEM052A

Classify hazardous areas — gas atmospheres

40

UEENEEM053A

Classify hazardous areas — dust atmospheres

40

UEENEEM057A

Design explosion-protected electrical systems and installations — gas atmospheres

20

UEENEEM058A

Design explosion-protected electrical systems and installations — dust atmospheres

20

UEENEEM059A

Design explosion-protected electrical systems and installations — pressurisation

20

UEENEEM075A

Design explosion-protected electrical systems — Coal mining

20

UEENEEM079A

Design of gas detection systems and installations

20

Note:  
1.Pre-requisite pathways shall be identified and met for all elective units selected.

2.In selecting elective units considerations to career planning advice should be given to units that form part of a pre-requisite pathway for the progression to achieve particular competencies or qualification at a higher level.

3.Registered training organisations shall also provide information related to the relevant pathway(s) that may be taken to achieve paraprofessional status ("associate membership") with a professional engineering membership organisation.

END OF QUALIFICATION 

Custom Content Section

Not applicable.