Modification History
Not Applicable
Description
Scope
This qualification provides competencies to design and validate/evaluate process control equipment and systems, manage risk, estimate and manage projects and provide technical advice/sales. It's also provides competencies to install, set up, test, develop, select, commission, maintain, diagnose faults/malfunctions of equipment and systems.
Pathways Information
Not Applicable
Licensing/Regulatory Information
Not Applicable
Entry Requirements
Not Applicable
Employability Skills Summary
Not Applicable
Packaging Rules
Completion requirements
The requirements for awarding this qualification are that the following are successfully achieved:
- All of the Core competency standard units;
- The required number of Stream Core competency standard units;
- The required number of Elective competency standard units as prescribed in the respective Schedule; and
- All the required pre-requisite competency standard units have been met as required.
- Note: UEENEEI012B - Those holding an 'Certificate III in Instrumentation and Control trade qualification or equivalent" meet the requirements of this unit and its pre-requisite requirements.
|
Core Competency Standard Units All Core competency standard units to be achieved |
||
|
UEENEED007B |
Develop, enter and verify programs for programmable logic controllers using ladder instruction set |
|
|
UEENEEE001B |
Apply OHS practices in the workplace |
|
|
UEENEEE002B |
Dismantle, assemble and fabricate electrotechnology components |
|
|
UEENEEE003B |
Solve problems in extra-low voltage single path circuits |
|
|
UEENEEE004B |
Solve problems in multiple path d.c. circuits |
|
|
UEENEEE005B |
Fix and secure equipment |
|
|
UEENEEE007B |
Use drawings, diagrams, schedules and manuals |
|
|
UEENEEE011C |
Manage risk in electrotechnology activities |
|
|
UEENEEE017B |
Implement and monitor OHS policies and procedures |
|
|
UEENEEE024C |
Compile and produce an electrotechnology report |
|
|
UEENEEE025B |
Solve problems in complex multiple path circuits |
|
|
UEENEEE026B |
Provide computational solutions to basic engineering problems |
|
|
UEENEEE035B |
Document occupational hazards and risks in instrumentation |
|
|
UEENEEE038B |
Participate in development and follow a personal competency development plan |
|
|
UEENEEE075B |
Write specifications for industrial electronics and control projects |
|
|
UEENEEH014B |
Troubleshoot frequency dependent circuits |
|
|
UEENEEH043B |
Diagnose and rectify faults in digital subsystems of electronic controls |
|
|
UEENEEH044B |
Diagnose and rectify faults in analogue circuits and components in electronic control systems |
|
|
UEENEEI001B |
Install and set up transducers and sensing devices |
|
|
UEENEEI002B |
Solve problems in pressure measurement systems |
|
|
UEENEEI003B |
Solve problems in density/level measurement systems |
|
|
UEENEEI004B |
Solve problems in flow measurement systems |
|
|
UEENEEI005B |
Solve problems in temperature measurement systems |
|
|
UEENEEI006B |
Solve problems in process controllers, transmitters and converters |
|
|
UEENEEI007C |
Install process instrumentation and control cabling and tubing |
|
|
UEENEEI008C |
Install process control apparatus and associated equipment |
|
|
UEENEEI010B |
Set up and adjust process control loops |
|
|
UEENEEI012B |
Verify compliance and functionality of process control installations |
|
|
UEENEEI013B |
Select equipment for process control systems |
|
|
UEENEEI034B |
Manage control projects |
|
|
UEENEEI035B |
Plan control projects |
|
|
UEENEEP001B |
Disconnect and reconnect fixed wired electrical equipment connected to a Low Voltage supply |
|
|
Stream Core Competency Standard Units At least 2 of the following competency standard units to be achieved |
|
|
BSBMGT502B |
Manage people performance |
|
BSBINM501A |
Manage an information or knowledge management system |
|
BSBMGT516C |
Facilitate continuous improvement |
|
BSBINN502A |
Build and sustain an innovative work environment |
|
BSBWOR502B |
Ensure team effectiveness |
Elective Competency Standard Units
In accordance with Schedules 3, 4, 5 and 6 which form an integral part of this qualification, achieve a Unit Strand Total of at least 38 of which at least 14 shall be selected from Schedule 6, and at least 14 from Schedule 5, and not more than 6 from Schedule 4 and not more than 4 from Schedule 3as specified.
Note : 1. Pre-requisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a pre-requisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. Registered training organisations shall provide competency development advice in relation to any licensing requirements to practice that apply, or can contribute towards the qualification requirement, prior to establishing the competency development plan.
4. Registered training organisations shall also provide information related to the relevant pathway(s) that may be taken to achieve paraprofessional status ("associate membership") with a professional engineering membership organisation.
END OF QUALIFICATION
______________________________________________________________________
