Modification History
|
Release |
Action |
Core/Elective |
Details |
Points |
|
2 |
Add |
Group B |
UETTDRIS67A Solve problems in energy supply network equipment |
80 |
|
2 |
Add |
Group B |
UETTDRIS68A Solve problems in energy supply network protection equipment and systems |
40 |
|
2 |
Add |
Group B |
UETTDRIS44A Perform HV field switching operation to a given schedule |
60 |
|
2 |
Add |
Group D |
UETTDRIS69A Diagnose and rectify faults in energy supply apparatus |
60 |
|
2 |
Add |
Group D |
UETTDRIS70A Diagnose and rectify faults in electrical energy distribution systems |
60 |
|
2 |
Add |
Group D |
UETTDRIS71A Diagnose and rectify faults in electrical energy supply transmission systems |
60 |
|
2 |
Add |
Group D |
UETTDRIS72A Diagnose and rectify faults in distributed Generation systems |
60 |
|
2 |
Edit |
Edit Name to Reflect correct Unit Title UEENEEI124A Fault find and repair analogue circuits and components in electronic control systems |
||
|
2 |
Edit |
Edit Name to reflect correct Unit title UEENEED104A Use engineering applications software on personal computers |
40 |
|
3 |
Edit |
Group B |
Edit Name to reflect correct Unit title UEENEEI102A Solve problems in pressure measurement components and systems |
40 |
|
3 |
Edit |
Group B |
Edit Name to reflect correct Unit title UEENEEI103A Solve problems in density_level measurement components and systems |
40 |
|
3 |
Edit |
Group B |
Edit Name to reflect correct Unit title UEENEEI104A Solve problems in flow measurement components and systems |
40 |
|
3 |
Edit |
Group B |
Edit Name to reflect correct Unit title UEENEEI105A Solve problems in temperature measurement components and systems |
40 |
|
3 |
Edit |
Group C |
Edit Name to reflect correct Unit title UEENEEI151A Develop, enter and verify word and analogue control programs for programmable logic controllers. |
60 |
Description
Scope
This qualification provides competencies to develop, select, commission, maintain and diagnose faults/malfunctions on advanced electrical equipment and systems.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
Not applicable.
Packaging Rules
Completion requirements
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- All the Core competency standard units, defined in the Core Competency Standard Units table below and
- A combination of Elective competency standard units to achieve a total weighting of 640 points in accordance with the Elective Competency Standard Units table below.
Note: UEENEEG199A - Those holding an ‘Electrical Fitter Licence or equivalent issued in an Australian State or Territory meets the requirements of this unit and its pre-requisite requirements.
|
Core Competency Standard Units All Core competency standard units to be achieved |
Weighting Points |
|
|
UEENEEE038B |
Participate in development and follow a personal competency development plan |
20 |
|
UEENEEE071B |
Write specifications for electrical engineering projects |
40 |
|
UEENEEE101A |
Apply Occupational Health Safety regulations, codes and practices in the workplace |
20 |
|
UEENEEE102A |
Fabricate, dismantle, assemble of utilities industry components |
40 |
|
UEENEEE104A |
Solve problems in d.c. circuits |
80 |
|
UEENEEE105A |
Fix and secure electrotechnology equipment |
20 |
|
UEENEEE107A |
Use drawings, diagrams, schedules, standards, codes and specifications |
40 |
|
UEENEEE117A |
Implement and monitor energy sector OHS policies and procedures |
20 |
|
UEENEEE124A |
Compile and produce an energy sector report |
60 |
|
UEENEEE137A |
Document and apply measures to control OHS risks associated with electrotechnology work |
20 |
|
UEENEEG006A |
Solve problems in single and three phase low voltage machines |
80 |
|
UEENEEG033A |
Solve problems in single and three phase low voltage electrical apparatus and circuits |
60 |
|
UEENEEG063A |
Arrange circuits, control and protection for general electrical installations |
40 |
|
UEENEEG101A |
Solve problems in electromagnetic devices and related circuits |
60 |
|
UEENEEG102A |
Solve problems in low voltage a.c. circuits |
80 |
|
UEENEEG106A |
Terminate cables, cords and accessories for low voltage circuits |
40 |
|
UEENEEG107A |
Select wiring systems and cables for low voltage general electrical installations |
60 |
|
UEENEEG108A |
Trouble-shoot and repair faults in low voltage electrical apparatus and circuits |
40 |
|
UEENEEG109A |
Develop and connect electrical control circuits |
80 |
|
UEENEEG199A |
Verify compliance and functionality of existing circuits |
40 |
|
UEENEEK132A |
Develop strategies to address environmental and sustainability issues in the energy sector |
20 |
|
Total points in core |
960 |
|
|
Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 640 points from the following groups: |
|||
|
Group |
Minimum points |
Maximum points |
|
|
A |
Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. |
0 |
270 |
|
B |
Qualification Elective Units |
0 |
140 |
|
C |
Qualification Elective Units |
0 |
240 |
|
D |
Qualification Elective Units You may select all your elective units from this Group |
260 |
640 |
|
Group A – Imported and Common Elective Units You may complete units to a maximum weighting of 270 |
Weighting Points |
||
|
BSBMGT502B |
Manage people performance |
70 |
|
|
BSBINM501A |
Manage an information or knowledge management system |
50 |
|
|
BSBMGT516C |
Facilitate continuous improvement |
60 |
|
|
BSBINN502A |
Build and sustain an innovative work environment |
50 |
|
|
BSBWOR502B |
Ensure team effectiveness |
60 |
|
|
UEENEEC001B |
Maintain documentation |
20 |
|
|
UEENEEC002B |
Source and purchase material/parts for installation or service jobs |
20 |
|
|
UEENEEC003B |
Provide quotations for installation or service jobs |
20 |
|
|
UEENEEC010B |
Deliver a service to customers |
20 |
|
|
UEENEED101A |
Use basic computer applications relevant to a workplace |
20 |
|
|
UEENEEE009B |
Comply with scheduled and preventative maintenance program processes |
20 |
|
|
UEENEEE020B |
Provide basic instruction in the use of electrotechnology apparatus |
20 |
|
|
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework |
Up to 270 points |
||
|
Group B – Qualification Elective Units You may complete units to a maximum weighting of 140 |
Weighting Points |
||
|
UEENEEA110A |
Assemble, mount and connect switchgear and controlgear |
40 |
|
|
UEENEEA112A |
Make up and assemble bus bars |
60 |
|
|
UEENEEA113A |
Assemble and wire control panels |
40 |
|
|
UEENEED104A |
Use engineering applications software on personal computers |
40 |
|
|
UEENEEF102A |
Install and maintain cabling for multiple access to telecommunication services |
120 |
|
|
UEENEEF104A |
Install and modify performance data communication copper cabling |
40 |
|
|
UEENEEF115A |
Assemble and connect telecommunication frames and cabinets |
60 |
|
|
UEENEEG110A |
Diagnose and rectify faults in d.c. electrical apparatus and circuits |
60 |
|
|
UEENEEG111A |
Carry out repairs to electrical apparatus |
40 |
|
|
UEENEEG116A |
Diagnose and rectify faults in lifts/escalator systems |
80 |
|
|
UEENEEG118A |
Maintain operation of electrical mining equipment and systems |
60 |
|
|
UEENEEG119A |
Maintain the operation of electrical marine equipment and systems |
60 |
|
|
UEENEEG129A |
Overhaul and repair switchgear and controlgear |
60 |
|
|
UEENEEG150A |
Wind electrical coils |
40 |
|
|
UEENEEG151A |
Place and connect electrical coils |
40 |
|
|
UEENEEG152A |
Rewind single phase machines |
40 |
|
|
UEENEEG153A |
Rewind LV three phase induction machines rated for low voltage |
60 |
|
|
UEENEEG154A |
Rewind LV direct current machines |
60 |
|
|
UEENEEG157A |
Conduct electrical tests on LV electrical machines |
40 |
|
|
UEENEEG159A |
Conduct mechanical tests of LV electrical machines |
40 |
|
|
UEENEEG164A |
Repair mechanical and electrical components of electrical machines |
40 |
|
|
UEENEEG165A |
Maintain and service electrical traction lifts |
40 |
|
|
UEENEEG166A |
Installation and maintenance of escalators, tread ways and moving walks |
40 |
|
|
UEENEEG167A |
Align and install lift components and equipment |
20 |
|
|
UEENEEG181A |
Provide advice on effective and energy efficient lighting products |
20 |
|
|
UEENEEG182A |
Supply effective and efficient lighting products for domestic and small commercial applications |
40 |
|
|
UEENEEG183A |
Provide advice on the application of energy efficient lighting for ambient and aesthetic effect |
20 |
|
|
UEENEEH102A |
Repair basic electronic apparatus faults by replacement of components |
40 |
|
|
UEENEEH111A |
Troubleshoot single phase input d.c. power supplies |
40 |
|
|
UEENEEI101A |
Use instrumentation drawings, specifications, standards and equipment manuals |
40 |
|
|
UEENEEI102A |
Solve problems in pressure measurement components and systems |
40 |
|
|
UEENEEI103A |
Solve problems in density_level measurement components and systems |
40 |
|
|
UEENEEI104A |
Solve problems in flow measurement components and systems |
40 |
|
|
UEENEEI105A |
Solve problems in temperature measurement components and systems |
40 |
|
|
UEENEEI107A |
Install process instrumentation and tubing and control cabling |
20 |
|
|
UEENEEI108A |
Install instrumentation and control apparatus and associated equipment |
20 |
|
|
UEENEEI116A |
Enter and verify operating instructions in microprocessor equipped devices |
20 |
|
|
UEENEEI150A |
Develop, enter and verify discrete control programs for programmable controllers |
60 |
|
|
UEENEEJ102A |
Prepare and connect refrigerant tubing and fittings |
30 |
|
|
UEENEEJ103A |
Establish the basic operating conditions of vapour compression systems |
60 |
|
|
UEENEEJ104A |
Establish the basic operating conditions of air conditioning systems |
20 |
|
|
UEENEEJ105A |
Position, assemble and start up single head split air conditioning and water heating heat pump systems |
70 |
|
|
UEENEEJ106A |
Install refrigerant pipe work, flow controls and accessories |
60 |
|
|
UEENEEJ108A |
Recover, pressure test, evacuate, charge and leak test refrigerants |
60 |
|
|
UEENEEJ151A |
Service small electrical appliances and power tools |
60 |
|
|
UEENEEJ153A |
Find and rectify fault motors and associated controls in refrigeration and air conditioning |
50 |
|
|
UEENEEJ154A |
Find and rectify faults in appliance control systems and devices |
60 |
|
|
UEENEEJ155A |
Service refrigeration appliances |
60 |
|
|
UEENEEJ156A |
Service clothes washing machines and dryers |
40 |
|
|
UEENEEJ157A |
Service electrical heating appliances |
60 |
|
|
UEENEEJ158A |
Service dishwasher machines |
40 |
|
|
UEENEEJ159A |
Service gas heating appliances |
40 |
|
|
UEENEEJ162A |
Recover, pressure test, evacuate, charge and leak test refrigerants — appliances |
50 |
|
|
UEENEEJ170A |
Diagnose and rectify faults in air conditioning and refrigeration control systems |
70 |
|
|
UEENEEJ173A |
Service and repair microwave ovens |
40 |
|
|
UEENEEJ194A |
Solve problems in low voltage refrigeration circuits |
40 |
|
|
UEENEEJ195A |
Establish the basic operating conditions of vapour compression systems - appliances |
50 |
|
|
UEENEEM019A |
Attend to breakdowns in hazardous areas — coal mining |
20 |
|
|
UEENEEM020A |
Attend to breakdowns in hazardous areas — gas atmospheres |
20 |
|
|
UEENEEM021A |
Attend to breakdowns in hazardous areas — dust atmospheres |
20 |
|
|
UEENEEM022A |
Attend to breakdowns in hazardous areas — pressurisation |
20 |
|
|
UEENEEM027A |
Maintain equipment in hazardous areas — coal mining |
60 |
|
|
UEENEEM028A |
Maintain equipment in hazardous areas — gas atmospheres |
60 |
|
|
UEENEEM029A |
Maintain equipment in hazardous areas — dust atmospheres |
60 |
|
|
UEENEEM030A |
Maintain equipment in hazardous areas — pressurisation |
60 |
|
|
UEENEEM031A |
Overhaul and repair of explosion-protected equipment — coal mining |
60 |
|
|
UEENEEM032A |
Overhaul and repair of explosion-protected equipment — flameproof enclosures |
60 |
|
|
UEENEEM033A |
Overhaul and repair of explosion-protected equipment — gas atmospheres |
60 |
|
|
UEENEEM034A |
Overhaul and repair of explosion-protected equipment — dust atmospheres |
40 |
|
|
UEENEEM060A |
Carry out overhaul and repair of explosion-protected equipment — coal mining |
60 |
|
|
UEENEEM061A |
Carry out overhaul and repair of explosion-protected equipment — flameproof enclosures |
60 |
|
|
UEENEEM062A |
Carry out overhaul and repair of explosion-protected equipment — gas atmospheres |
60 |
|
|
UEENEEM063A |
Carry out overhaul and repair of explosion-protected equipment — dust atmospheres |
60 |
|
|
UEENEEM070A |
Repair reeling, trailing and flexible cables |
60 |
|
|
UEENEEM071A |
Test reeling, trailing and flexible cables |
60 |
|
|
UEENEEM072A |
Inspect and fit plugs/couplers for reeling, trailing and flexible cables |
60 |
|
|
UEENEEM073A |
Verify compliance of repaired reeling, trailing and flexible cables |
60 |
|
|
UEENEEM076A |
Use and maintain the integrity of a portable gas detection device |
20 |
|
|
UEENEEM077A |
Install and maintain the integrity of fixed gas detection equipment |
20 |
|
|
UEENEEM080A |
Report on the integrity of explosion-protected equipment in a hazardous area |
20 |
|
|
UEENEEN102A |
Assemble and wire internal electrical rail signalling equipment |
30 |
|
|
UETTDRIS43A |
Perform low voltage field switching operation to a given schedule. |
50 |
|
|
UETTDRIS44A |
Perform high voltage field switching operation to a given schedule |
40 |
|
|
UETTDRIS47A |
Sample, test, filter and reinstate insulating oil |
40 |
|
|
UETTDRIS67A |
Solve problems in energy supply network equipment |
80 |
|
|
UETTDRIS68A |
Solve problems in energy supply network protection equipment and systems |
40 |
|
|
UETTDRSB29A |
Maintain capacitor bank equipment for voltage regulation |
40 |
|
|
UETTDRSB39A |
Perform power system substation switching operation to a given schedule |
50 |
|
|
Group C – Qualification Elective Units You may complete units to a maximum weighting of 240 |
Weighting Points |
|
|
UEENEEG128A |
Plan layouts for electrical switchboards and control panels |
40 |
|
UEENEEG155A |
Rewind three phase induction machines rated for HV to 3.3 kV |
60 |
|
UEENEEG156A |
Rewind three phase induction machines rated for HV above 3.3 kV |
60 |
|
UEENEEG158A |
Conduct electrical tests on HV electrical machines |
60 |
|
UEENEEG168A |
Diagnose and rectify faults in complex lifts equipment and systems |
40 |
|
UEENEEG179A |
Develop detailed electrical drawings |
60 |
|
UEENEEI119A |
Set up transducers and field control devices |
60 |
|
UEENEEI120A |
Provide solutions to problems in industrial control systems |
60 |
|
UEENEEI124A |
Fault find and repair analogue circuits and components in electronic control systems |
60 |
|
UEENEEI125A |
Provide solutions to fluid circuit operations |
60 |
|
UEENEEI126A |
Provide solutions to pneumatic/hydraulic system operations |
80 |
|
UEENEEI139A |
Diagnose and rectify faults in digital controls systems |
60 |
|
UEENEEI148A |
Provide solutions to single phase electronic power control problems |
60 |
|
UEENEEI149A |
Provide solutions to polyphase electronic power control problems |
60 |
|
UEENEEI151A |
Develop, enter and verify word and analogue control programs for programmable logic controllers. |
60 |
|
UEENEEI152A |
Develop, enter and verify programs in Supervisory Control and Data Acquisition systems |
60 |
|
UEENEEI155A |
Develop structured programs to control external devices |
40 |
|
UEENEEM038A |
Conduct testing of hazardous areas installations — coal mining |
40 |
|
UEENEEM039A |
Conduct testing of hazardous areas installations — gas atmospheres |
40 |
|
UEENEEM040A |
Conduct testing of hazardous areas installations — dust atmospheres |
40 |
|
UEENEEM041A |
Conduct testing of hazardous area installations — pressurisation |
40 |
|
UEENEEM042A |
Conduct visual inspection of hazardous areas installations |
40 |
|
UEENEEM043A |
Conduct detailed inspection of hazardous areas installations — coal mining |
40 |
|
UEENEEM044A |
Conduct detailed inspection of hazardous areas installations — gas atmospheres |
40 |
|
UEENEEM045A |
Conduct detailed inspection of hazardous areas installations — dust atmospheres |
40 |
|
UEENEEM046A |
Conduct detailed inspection of hazardous areas installations — pressurisation |
40 |
|
UEENEEM047A |
Develop and manage maintenance programs for hazardous areas electrical equipment — coal mining |
20 |
|
UEENEEM048A |
Develop and manage maintenance programs for hazardous areas electrical equipment — gas atmospheres |
20 |
|
UEENEEM049A |
Develop and manage maintenance programs for hazardous areas electrical equipment — dust atmospheres |
20 |
|
UEENEEM050A |
Develop and manage maintenance programs for hazardous areas electrical equipment — pressurisation |
20 |
|
UEENEEM054A |
Plan electrical installations for hazardous areas — gas atmospheres |
20 |
|
UEENEEM055A |
Plan electrical installations for hazardous areas — dust atmospheres |
20 |
|
UEENEEM056A |
Plan electrical installations for hazardous areas — pressurisation |
20 |
|
UEENEEM074A |
Plan electrical installations in hazardous areas — Coal mining |
20 |
|
UEENEEM078A |
Manage compliance of hazardous areas |
20 |
|
Group D – Qualification Elective Units You must complete units to a minimum weighting of 260 You may select all your elective units from this Group |
Weighting Points |
|
|
UEENEEC006B |
Prepare tender submissions for electrotechnology projects |
60 |
|
UEENEEE110A |
Develop and implement energy sector maintenance programs |
60 |
|
UEENEEG127A |
Design LV electrical installations with a demand greater than 400 A per phase |
40 |
|
UEENEEG131A |
Evaluate performance of LV electrical apparatus |
40 |
|
UEENEEG149A |
Provide engineering solutions to problems in complex polyphase power circuits |
60 |
|
UEENEEG180A |
Develop detailed and complex drawings for electrical systems using CAD systems |
60 |
|
UEENEEG187A |
Design effective and efficient lighting for public, open and sports areas |
20 |
|
UEENEEI145A |
Diagnose and rectify faults in a.c. motor drive systems |
60 |
|
UEENEEI146A |
Diagnose and rectify faults in d.c. motor drive systems |
60 |
|
UEENEEI147A |
Diagnose and rectify faults in servo drive systems |
60 |
|
UEENEEI156A |
Develop and test code for microcontroller devices |
60 |
|
UEENEEI157A |
Configure and maintain industrial control system networks |
60 |
|
UEENEEM035A |
Conduct a conformity assessment of explosion-protected equipment — coal mining |
40 |
|
UEENEEM036A |
Conduct a conformity assessment of explosion-protected equipment — gas atmospheres |
40 |
|
UEENEEM037A |
Conduct a conformity assessment of explosion-protected equipment — dust atmospheres |
40 |
|
UEENEEM064A |
Conduct audit of hazardous areas installations — coal mining |
60 |
|
UEENEEM065A |
Conduct audit of hazardous areas installations — gas atmospheres |
60 |
|
UEENEEM066A |
Conduct audit of hazardous areas installations — dust atmospheres |
60 |
|
UEENEEM067A |
Assess the fitness-for-purpose of hazardous areas explosion-protected equipment — coal mining |
60 |
|
UEENEEM068A |
Assess the fitness-for-purpose of hazardous areas explosion-protected equipment — gas atmospheres |
60 |
|
UEENEEM069A |
Assess the fitness-for-purpose of hazardous areas explosion-protected equipment — dust atmospheres |
60 |
|
UETTDRIS69A |
Diagnose and rectify faults in energy supply apparatus |
60 |
|
UETTDRIS70A |
Diagnose and rectify faults in electrical energy distribution systems |
60 |
|
UETTDRIS71A |
Diagnose and rectify faults in electrical energy supply transmission systems |
60 |
|
UETTDRIS72A |
Diagnose and rectify faults in distributed Generation systems |
60 |
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
Registered training organisations shall provide competency development advice in relation to any licensing requirements to practice that apply, or can contribute towards the qualification requirement, prior to establishing the competency development plan.
END OF QUALIFICATION
Custom Content Section
Not applicable.
