Qualification details

Release 3. This is the second release of this qualification in the UEE Electrotechnology Training Package. Modifications include:

• Updated superseded imported elective units
• The following units added to electives (see UEE Release 5.0 Companion Volume Implementation Guide for mapping of deleted UEE units to imported ICT and MEM units):

• ICTNWK426
• ICTTEN409
• MEM234010A
• ICTPRG549
• ICTPRG534
• ICTWEB447.

Release 2. Updated superseded elective units.

Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package.

This qualification covers competencies to install, set up, test, develop, select, commission, maintain and diagnose faults/malfunctions of equipment and systems for the measurement, recording, monitoring and control of physical/chemical phenomenon and related process control systems.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

There are no entry requirements for this qualification

A total of 1600 weighting points  comprising:

1120 core weighting points  listed below; plus

480 general elective weighting points  from the general elective units listed below.

Choose a total of 480 weighting points  elective units from the list below, of which between 0 and 180 weighting points  can be taken from Group A; and between 0 and 100 weighting points  must be taken from Group B; and between 0 and 120 weighting points  must be taken from Group C; and between 260 and 480 weighting points  must be taken from Group D or all minimum 480 weighting points  can be taken from Group D

Up to 180 weighting points  of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.

Core units  

Weighting Points 

UEECD0007

Apply work health and safety regulations, codes and practices in the workplace

20

UEECD0010

Compile and produce an energy sector detailed report

60

UEECD0016

Document and apply measures to control WHS risks associated with electrotechnology work*

20

UEECD0019

Fabricate, assemble and dismantle utilities industry components*

40

UEECD0020

Fix and secure electrotechnology equipment*

20

UEECD0024

Implement and monitor energy sector WHS policies and procedures

20

UEECD0027

Participate in development and follow a personal competency development plan

20

UEECD0043

Solve problems in direct current circuits*

80

UEECD0045

Solve problems in multiple path extra-low voltage (ELV) a.c. circuits*

40

UEECD0051

Use drawings, diagrams, schedules, standards, codes and specifications*

40

UEECD0055

Write specifications for industrial electronics and control projects

40

UEEIC0013

Develop, enter and verify discrete control programs for programmable controllers*

60

UEEIC0018

Diagnose and rectify faults in digital controls systems*

60

UEEIC0020

Fault find and repair analogue circuits and components in electronic control systems*

60

UEEIC0021

Find and rectify faults in process final control elements*

40

UEEIC0022

Install instrumentation and control apparatus and associated equipment*

20

UEEIC0023

Install instrumentation and control cabling and tubing*

20

UEEIC0029

Set up and adjust PID control loops*

40

UEEIC0030

Set up and adjust advanced PID process control loops*

40

UEEIC0031

Set up and configure human-machine interface (HMI) and industrial networks*

60

UEEIC0038

Solve problems in density/level measurement components and systems*

40

UEEIC0039

Solve problems in flow measurement components and systems*

40

UEEIC0041

Solve problems in pressure measurement components and systems*

40

UEEIC0043

Solve problems in temperature measurement components and systems*

40

UEEIC0047

Use instrumentation drawings, specifications, standards and equipment manuals*

40

UEEIC0048

Verify compliance and functionality of instrumentation and control installations*

40

UEERE0013

Develop strategies to address environmental and sustainability issues in the energy sector

20

UEERL0004

Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring*

60

Group A: Imported and common elective units 

Weighting Points 

BSBINS501

Implement information and knowledge management systems

50

BSBLDR522

Manage people performance

70

BSBOPS203

Deliver a service to customers

20

BSBSTR501

Establish innovative work environments

50

BSBSTR502

Facilitate continuous improvement

60

BSBTWK502

Manage team effectiveness

60

ICTICT214

Operate application software packages

20

UEECD0011

Comply with scheduled and preventative maintenance program processes

20

UEECD0035

Provide basic instruction in the use of electrotechnology apparatus

20

UEECO0002

Maintain documentation

20

UEECO0015

Provide quotations for installation or service jobs

20

UEECO0017

Source and purchase material/parts for installation or service jobs

20

Group B: General elective units 

Weighting Points 

UEECD0050

Use and maintain the integrity of a portable gas detection device*

20

UEECS0033

Use engineering applications software on personal computers

40

UEEEC0060

Repairs basic electronic apparatus faults by replacement of components*

40

UEEEC0069

Troubleshoot digital sub-systems*

80

UEEEC0075

Troubleshoot single phase input d.c power supplies*

40

UEEHA0025

Install explosion-protected equipment and associated apparatus and wiring systems*

60

UEEHA0026

Maintain equipment associated with hazardous areas*

60

UEEIC0004

Calibrate, adjust and test measuring instruments*

40

UEEIC0033

Set up gas analysis measuring and control instruments*

20

UEEIC0035

Set up scientific analysis measuring and control instruments*

20

UEEIC0036

Set up water analysis measuring and control instruments*

20

UEEIC0037

Set up weighting measuring and control instruments*

20

UEEIC0045

Troubleshoot medical equipment control systems*

120

UEEIC0046

Troubleshoot process control systems*

60

Group C: General elective units 

Weighting Points 

ICTNWK426

Install and configure client-server applications and services

60

UEECO0001

Estimate electrotechnology projects

40

UEECS0014

Develop computer network services*

120

UEEHA0004

Enter a classified hazardous area to undertake work related to electrical equipment

40

UEEHA0020

Conduct detailed inspection of electrical installations for hazardous areas*

40

UEEHA0022

Determine the explosion-protection requirements to meet a specified classified hazardous area*

40

UEEHA0025

Install explosion-protected equipment and associated apparatus and wiring systems*

60

UEEHA0026

Maintain equipment associated with hazardous areas*

60

UEEHA0038

Conduct visual and close inspection of electrical installations for hazardous areas*

40

UEEIC0003

Assist in commissioning process and instrumentation control systems*

40

UEEIC0012

Develop structured programs to control external devices*

40

UEEIC0014

Develop, enter and verify programs in supervisory control and data acquisition systems*

60

UEEIC0015

Develop, enter and verify word and analogue control programs for programmable logic controllers*

60

UEEIC0026

Provide solutions to fluid circuit operations*

60

UEEIC0027

Provide solutions to pneumatic-hydraulic system operations*

80

UEEIC0042

Solve problems in single phase electronic power control circuits*

60

UEEIC0044

Troubleshoot measuring and analysis systems*

40

Group D: General elective units 

Weighting Points 

ICTPRG534

Deploy applications to production environments

40

ICTPRG549

Apply intermediate object-oriented language skills

60

ICTTEN409

Commission an electronic system

50

ICTWEB447

Build basic website using development software and ICT tools

20

MEM234010A

Design microcontroller applications

40

UEECO0014

Prepare tender submissions for electrotechnology projects*

60

UEECS0004

Commission industrial computer systems*

20

UEECS0012

Design embedded controller control systems

80

UEECS0019

Develop, implement and test object-oriented code*

140

UEECS0025

Modify/redesign industrial computer systems*

20

UEECS0031

Set up, create and implement content for a web server*

120

UEEEL0006

Develop detailed and complex drawings for electrical systems using CAD systems*

60

UEEEL0011

Evaluate performance of low voltage electrical apparatus*

40

UEEIC0001

Analyse complex electronic circuits controlling fluids

80

UEEIC0005

Configure and maintain industrial control system networks*

60

UEEIC0010

Develop and test code for microcontroller devices

60

UEEIC0016

Diagnose and rectify faults in a.c. motor drive systems*

60

UEEIC0017

Diagnose and rectify faults in d.c. motor drive systems*

60

UEEIC0019

Diagnose and rectify faults in servo drive systems*

60

This qualification replaces and is equivalent to UEE51011 Diploma of Instrumentation and Control Engineering