Modification History
Not applicable.
Description
Scope
This qualification provides competencies to develop, select, commission, maintain and diagnose faults/malfunctions on large scale renewable energy equipment and systems.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
Not applicable.
Packaging Rules
Completion requirements
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- All the Core competency standard units, defined in the Core Competency Standard Units table below and
- A combination of Elective competency standard units to achieve a total weighting of 520 points in accordance with the Elective Competency Standard Units table below.
- All the required prerequisite competency standard units
Note: UEENEEG105A - Those holding an ‘Unrestricted Electricians Licence or equivalent issued in an Australian State or Territory meets the requirements of this unit and its pre-requisite requirements.
|
Core Competency Standard Units All Core competency standard units to be achieved |
Weighting Points |
|
|
UEENEEE038B |
Participate in development and follow a personal competency development plan |
20 |
|
UEENEEE074B |
Write specifications for renewable energy projects |
40 |
|
UEENEEE101A |
Apply Occupational Health Safety regulations, codes and practices in the workplace |
20 |
|
UEENEEE102A |
Fabricate, dismantle, assemble of utilities industry components |
40 |
|
UEENEEE104A |
Solve problems in d.c. circuits |
80 |
|
UEENEEE105A |
Fix and secure electrotechnology equipment |
20 |
|
UEENEEE107A |
Use drawings, diagrams, schedules, standards, codes and specifications |
40 |
|
UEENEEE117A |
Implement and monitor OHS energy sector procedures and policies |
20 |
|
UEENEEE124A |
Compile and produce an energy sector report |
60 |
|
UEENEEE137A |
Document and apply measures to control OHS risks associated with electrotechnology work |
20 |
|
UEENEEG006A |
Solve problems in single and three phase low voltage machines |
80 |
|
UEENEEG033A |
Solve problems in single and three phase low voltage electrical apparatus and circuits |
60 |
|
UEENEEG063A |
Arrange circuits, control and protection for general electrical installations |
40 |
|
UEENEEG101A |
Solve problems in electromagnetic devices and related circuits |
60 |
|
UEENEEG102A |
Solve problems in low voltage a.c. circuits |
80 |
|
UEENEEG103A |
Install low voltage wiring and accessories |
20 |
|
UEENEEG104A |
Install appliances, switchgear and associated accessories for low voltage electrical installations |
20 |
|
UEENEEG105A |
Verify compliance and functionality of low voltage general electrical installations |
40 |
|
UEENEEG106A |
Terminate cables, cords and accessories for low voltage circuits |
40 |
|
UEENEEG107A |
Select wiring systems and cables for low voltage general electrical installations |
60 |
|
UEENEEG108A |
Trouble-shoot and repair faults in low voltage electrical apparatus and circuits |
40 |
|
UEENEEG109A |
Develop and connect electrical control circuits |
80 |
|
UEENEEK123A |
Carry out basic repairs to renewable energy apparatus |
80 |
|
UEENEEK132A |
Develop energy sector strategies to address environmental and sustainability issues |
20 |
|
Total points in core |
1080 |
|
|
Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 520 points from the following groups: |
|||
|
Group |
Minimum points |
Maximum points |
|
|
A |
Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. |
0 |
260 |
|
B |
Qualification Elective Units |
0 |
100 |
|
C |
Qualification Elective Units |
0 |
240 |
|
D |
Qualification Elective Units |
260 |
340 |
|
Group A – Imported and Common Elective Units You may complete units to a maximum weighting of 260 |
Weighting Points |
||
|
BSBMGT502B |
Manage people performance |
70 |
|
|
BSBINM501A |
Manage an information or knowledge management system |
50 |
|
|
BSBMGT516C |
Facilitate continuous improvement |
60 |
|
|
BSBINN502A |
Build and sustain an innovative work environment |
50 |
|
|
BSBWOR502B |
Ensure team effectiveness |
60 |
|
|
UEENEEC001B |
Maintain documentation |
20 |
|
|
UEENEEC002B |
Source and purchase material/parts for installation or service jobs |
20 |
|
|
UEENEEC003B |
Provide quotations for installation or service jobs |
20 |
|
|
UEENEEC010B |
Deliver a service to customers |
20 |
|
|
UEENEED101A |
Use basic computer applications relevant to a energy sector workplace |
20 |
|
|
UEENEEE009B |
Comply with scheduled and preventative maintenance program processes |
20 |
|
|
UEENEEE020B |
Provide basic instruction in the use of electrotechnology apparatus |
20 |
|
|
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework |
Up to 260 points |
||
|
Group B – Qualification Elective Units You may complete units to a maximum weighting of 100 |
Weighting Points |
||
|
UEENEED104A |
Use engineering applications software on personal computers |
40 |
|
|
UEENEEG171A |
Install, set up and commission interval metering |
20 |
|
|
UEENEEH102A |
Repair basic electronic apparatus faults by replacement of components |
40 |
|
|
UEENEEH111A |
Troubleshoot single phase input d.c. power supplies |
40 |
|
|
UEENEEI116A |
Enter and verify operating instructions in microprocessor equipped devices |
20 |
|
|
UEENEEI150A |
Develop, enter and verify discrete control programs for programmable controllers |
60 |
|
|
UEENEEK124A |
Solve basic problems in micro hydro systems |
20 |
|
|
UEENEEK125A |
Solve basic problems in photovoltaic energy apparatus and systems |
20 |
|
|
UEENEEK127A |
Diagnose and rectify faults in renewable energy control systems |
60 |
|
|
UEENEEK128A |
Solve problems in stand-alone renewable energy apparatus and systems |
60 |
|
|
UEENEEK130A |
Solve problems in wind energy conversion apparatus and systems |
60 |
|
|
UEENEEK134A |
Install standalone extra low voltage photovoltaic power systems |
60 |
|
|
UEENEEK136A |
Install, configure and commission LV micro-hydro systems rated up to 6.4 kW |
20 |
|
|
UEENEEK137A |
Install and set up micro-hydro power systems |
20 |
|
|
UEENEEK143A |
Install wind energy conversion systems rated to 10 kW for ELV stand-alone applications |
20 |
|
|
UEENEEK144A |
Install, configure and commission LV wind energy conversion systems rated to 10 kW |
40 |
|
|
UEENEEK148A |
Install, configure and commission photovoltaic grid connected power systems |
40 |
|
|
Group C – Qualification Elective Units You may complete units to a maximum weighting of 240 |
Weighting Points |
|
|
UEENEEC004B |
Prepare specifications for the supply of equipment and materials for electrotechnology projects |
40 |
|
UEENEEC005B |
Estimate electrotechnology projects |
40 |
|
UEENEEG175A |
Develop compliance policies and plans to conduct a electrical contracting business |
80 |
|
UEENEEK135A |
Design photovoltaic grid connected power supply systems |
60 |
|
UEENEEK145A |
Implement and monitor energy sector policies and procedures for environmental and sustainable work practices |
20 |
|
UEENEEK152A |
Develop strategies to address sustainability issues for electrical installations |
20 |
|
UEENEEK153A |
Assessment of energy loads and uses for energy efficiency in residential, office and retail dwellings |
40 |
|
UEENEEK154A |
Assessment of energy loads and uses for energy efficiency in commercial facilities |
40 |
|
UEENEEK155A |
Assessment of energy loads and uses for energy efficiency in large industrial properties and enterprise |
40 |
|
Group D – Qualification Elective Units You must complete units to a minimum weighting of 260 to a maximum of 340 |
Weighting Points |
|
|
UEENEEC006B |
Prepare tender submissions for electrotechnology projects |
60 |
|
UEENEEG131A |
Evaluate performance of LV electrical apparatus |
40 |
|
UEENEEK129A |
Design renewable energy (RE) heating systems |
120 |
|
UEENEEK131A |
Design wind energy conversion systems (WECS) rated to 10 kW. |
60 |
|
UEENEEK138A |
Design micro-hydro power systems |
60 |
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. Registered training organisations shall provide competency development advice in relation to any licensing requirements to practice that apply, or can contribute towards the qualification requirement, prior to establishing the competency development plan.
END OF QUALIFICATION
Custom Content Section
Not applicable.
