Qualification details

Release 3. This is the third release of this qualification in the UEE Electrotechnology Training Package. Modifications include:

• Updated superseded imported elective units
• ICTTEN420 added to electives (see UEE Release 5.0 Companion Volume Implementation Guide for mapping of deleted UEE units to imported ICT units)

Release 2. Updated superseded imported elective units.

Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package

This qualification covers competencies to select, install, set up, test, fault find, repair, maintain and commission systems and devices for measurement and recording of physical/chemical phenomenon and related process control systems.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

There are no entry requirements for this qualification

A total of 1280 weighting points  comprising:

520 core weighting points  listed below; plus

760 general elective weighting points  from the general elective units listed below.

Choose a total of 760 weighting points  elective units from the list below, of which between 0 and 220 weighting points  can be taken from Group A; and between 0 and 540 weighting points  must be taken from Group B; and between 220 and 760 weighting points  must be taken from Group C, or all 760 weighting points  can be taken from Group C.

Up to 220 weighting points  of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.

Core units  

Weighting Points 

UEECD0007

Apply work health and safety regulations, codes and practices in the workplace

20

UEECD0010

Compile and produce an energy sector detailed report

60

UEECD0016

Document and apply measures to control WHS risks associated with electrotechnology work*

20

UEECD0019

Fabricate, assemble and dismantle utilities industry components*

40

UEECD0024

Implement and monitor energy sector WHS policies and procedures

20

UEECD0027

Participate in development and follow a personal competency development plan

20

UEECS0033

Use engineering applications software on personal computers

40

UEECD0043

Solve problems in direct current circuits*

80

UEECD0045

Solve problems in multiple path extra-low voltage (ELV) a.c. circuits*

40

UEECD0051

Use drawings, diagrams, schedules, standards, codes and specifications*

40

UEEIC0025

Provide solutions to extra-low voltage (ELV) electro-pneumatic control systems and drives*

60

UEERE0015

Implement and monitor energy sector environmental and sustainable policies and procedures

20

UEPOPS202

Apply quality systems to work

20

UEPOPS337

Maintain quality systems within the team*

20

UEPOPS416

Monitor implementation of quality control for production and maintenance*

20

Group A: Imported and common elective units 

Weighting Points 

BSBHRM413

Support the learning and development of teams and individuals

40

BSBINS402

Coordinate workplace information systems

40

BSBLDR413

Lead effective workplace relationships

50

BSBLDR414

Lead team effectiveness

50

BSBOPS203

Deliver a service to customers

20

BSBOPS402

Coordinate business operational plans

40

BSBOPS404

Implement customer service strategies

40

BSBPEF402

Develop personal work priorities

40

BSBSTR401

Promote innovation in team environments

40

BSBSTR402

Implement continuous improvement

40

HLTAID009

Provide cardiopulmonary resuscitation

10

ICTICT214

Operate application software packages

20

TLILIC0003

Licence to operate a forklift truck

40

UEECD0011

Comply with scheduled and preventative maintenance program processes

20

UEECD0035

Provide basic instruction in the use of electrotechnology apparatus

20

UEECO0002

Maintain documentation

20

UEECO0015

Provide quotations for installation or service jobs

20

UEECO0017

Source and purchase material/parts for installation or service jobs

20

Group B: General elective units 

Weighting Points 

UEECS0003

Assemble, set up and test computing devices*

80

UEECS0029

Set up and configure basic local area network (LAN)*

80

UEEDV0010

Select and arrange equipment for wireless communication networks*

40

UEEEC0074

Troubleshoot resonance circuits in an electronic apparatus*

80

UEEEC0075

Troubleshoot single phase input d.c power supplies*

40

UEEEL0004

Carry out basic repairs to electrical components and equipment*

40

UEEEL0017

Repair and maintain mechanical components of electrical machines*

40

UEEEL0019

Solve problems in direct current (d.c.) machines*

30

UEEEL0020

Solve problems in low voltage a.c. circuits*

80

UEEEL0021

Solve problems in magnetic and electromagnetic devices*

30

UEEEL0023

Terminate cables, cords and accessories for low voltage circuits*

40

UEEIC0002

Assemble, enter and verify operating instructions in microprocessor equipped devices*

20

UEEIC0013

Develop, enter and verify discrete control programs for programmable controllers*

60

UEEIC0021

Find and rectify faults in process final control elements*

40

UEEIC0022

Install instrumentation and control apparatus and associated equipment*

20

UEEIC0023

Install instrumentation and control cabling and tubing*

20

UEEIC0029

Set up and adjust PID control loops*

40

UEEIC0030

Set up and adjust advanced PID process control loops*

40

UEEIC0031

Set up and configure human-machine interface (HMI) and industrial networks*

60

UEEIC0038

Solve problems in density/level measurement components and systems*

40

UEEIC0039

Solve problems in flow measurement components and systems*

40

UEEIC0041

Solve problems in pressure measurement components and systems*

40

UEEIC0043

Solve problems in temperature measurement components and systems*

40

UEEIC0047

Use instrumentation drawings, specifications, standards and equipment manuals*

40

UEEIC0048

Verify compliance and functionality of instrumentation and control installations*

40

UEERL0001

Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply*

20

UEERL0002

Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.*

20

UEERL0003

Conduct in-service safety testing of electrical cord connected equipment and cord assemblies*

20

Group C: General elective units 

Weighting Points 

ICTTEN420

Design, install and configure an internetwork

100

UEECS0023

Install and configure network systems for internetworking*

120

UEEIC0003

Assist in commissioning process and instrumentation control systems*

40

UEEIC0012

Develop structured programs to control external devices*

40

UEEIC0014

Develop, enter and verify programs in supervisory control and data acquisition systems*

60

UEEIC0015

Develop, enter and verify word and analogue control programs for programmable logic controllers*

60

UEEIC0018

Diagnose and rectify faults in digital controls systems*

60

UEEIC0026

Provide solutions to fluid circuit operations*

60

UEEIC0027

Provide solutions to pneumatic-hydraulic system operations*

80

UEEIC0028

Provide solutions to problems in industrial control systems*

60

UEEIC0034

Set up industrial field control devices*

60

UEEIC0040

Solve problems in polyphase electronic power control circuits*

60

UEEIC0042

Solve problems in single phase electronic power control circuits*

60

UEEIC0044

Troubleshoot measuring and analysis systems*

40

This qualification replaces and is equivalent to UEE43211 Certificate IV in Industrial Automation and Control