Modification History
Release 2: This minor update is the second release of this qualification in the UEE Electrotechnology Training Package. Qualification description updated. Imported units updated. |
Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package |
Qualification Description
This qualification provides competencies to supervise selection, installation, commissioning maintenance and testing of explosion-protected equipment and systems for control and monitoring of plant and processes. The qualification provides competencies in working with explosion-protection techniques. Site-specific work permits maybe required to work in a hazardous environment. Licensing, legislative or certification requirements, and additional/other conditions may apply in some jurisdictions subject to regulations related to electrical work and work health and safety (WHS)/occupational health and safety (OHS). |
Entry Requirements
The entry requirement for this qualification is:
or
|
Packaging Rules
A total of 440 weighting points comprising: 200 core weighting points listed below; plus 240 general elective weighting points from the general elective units listed below. Choose a total of 240 weighting points elective units from the list below, of which between 0 and 60 weighting points can be taken from Group A; between 0 and 80 weighting points can be taken from Group B; and between 140 and 240 can be taken from Group C (or all 240 elective weighting points can be taken from Group C). Up to 60 weighting points of the general elective units Group A , may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC). There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume. Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with. |
||
Core units |
Weighting Points |
|
UEECD0010 |
Compile and produce an energy sector detailed report |
60 |
UEECD0024 |
Implement and monitor energy sector WHS policies and procedures |
20 |
UEECD0027 |
Participate in development and follow a personal competency development plan |
20 |
UEEHA0003 |
Determine the explosion-protection requirements to meet a specified classified hazardous area* |
40 |
UEEHA0004 |
Enter a classified hazardous area to undertake work related to electrical equipment |
40 |
UEERE0015 |
Implement and monitor energy sector environmental and sustainable policies and procedures |
20 |
Group A: Imported and common elective units |
Weighting Points |
|
BSBOPS203 |
Deliver a service to customers |
20 |
ICTICT214 |
Operate application software packages |
20 |
UEECD0011 |
Comply with scheduled and preventative maintenance program processes |
20 |
UEECD0035 |
Provide basic instruction in the use of electrotechnology apparatus |
20 |
UEECO0002 |
Maintain documentation |
20 |
UEECO0015 |
Provide quotations for installation or service jobs |
20 |
UEECO0017 |
Source and purchase material/parts for installation or service jobs |
20 |
Group B: General elective units |
Weighting Points |
|
UEECD0050 |
Use and maintain the integrity of a portable gas detection device* |
20 |
UEEHA0005 |
Install explosion-protected equipment and associated apparatus and wiring systems* |
60 |
UEEHA0006 |
Maintain equipment associated with hazardous areas* |
60 |
UEEHA0010 |
Supervise repair and overhaul of explosion-protected equipment type Group III (‘t’)* |
60 |
UEEHA0011 |
Supervise repair and overhaul of explosion-protected equipment type flameproof (Ex d)* |
60 |
UEEHA0012 |
Supervise repair and overhaul of explosion-protected equipment type increased safety (Ex e)* |
60 |
UEEHA0013 |
Supervise repair and overhaul of explosion-protected equipment type intrinsically safe (Ex i)* |
60 |
UEEHA0014 |
Supervise repair and overhaul of explosion-protected equipment type pressurised (Ex p)* |
60 |
UEEHA0015 |
Supervise repair and overhaul of explosion-protected rotating machines* |
60 |
Group C: General elective units |
Weighting Points |
|
UEEHA0001 |
Conduct detailed inspection of electrical installations for hazardous areas* |
40 |
UEEHA0002 |
Conduct visual and close inspection of electrical installations for hazardous areas* |
40 |
UEEHA0005 |
Install explosion-protected equipment and associated apparatus and wiring systems* |
60 |
UEEHA0006 |
Maintain equipment associated with hazardous areas* |
60 |
UEEHA0007 |
Plan electrical installations for hazardous areas* |
20 |
UEEHA0009 |
Develop and manage periodic electrical inspection and maintenance programs for hazardous areas* |
20 |
Qualification Mapping Information
This qualification replaces and is not equivalent to UEE42611 Certificate IV in Hazardous areas - Electrical |
Links
Companion Volume Implementation Guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6