^

 
 

Qualification details

UEE41920 - Certificate IV in Electrical - Renewable Energy (Release 1)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes UEE41911 - Certificate IV in Electrical - Renewable Energy 04/Oct/2020

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 05/Oct/2020


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssentialSort Table listing Units of Competency by the Essential column
UEERE0023 - Work safely with remote area power supply systemsWork safely with remote area power supply systemsElective
UEERE0027 - Coordinate maintenance of renewable energy (RE) apparatus and systemsCoordinate maintenance of renewable energy (RE) apparatus and systemsElective
ICTICT203 - Operate application software packagesOperate application software packagesElective
UEERE0035 - Install ELV stand-alone photovoltaic power systemsInstall ELV stand-alone photovoltaic power systemsElective
CPCCWHS1001 - Prepare to work safely in the construction industryPrepare to work safely in the construction industryElective
UEEIC0002 - Assemble, enter and verify operating instructions in microprocessor equipped devicesAssemble, enter and verify operating instructions in microprocessor equipped devicesElective
UEECO0017 - Source and purchase material/parts for installation or service jobsSource and purchase material/parts for installation or service jobsElective
UEEIC0013 - Develop, enter and verify discrete control programs for programmable controllersDevelop, enter and verify discrete control programs for programmable controllersElective
UEERE0016 - Install, configure and commission LV grid-connected photovoltaic power systemsInstall, configure and commission LV grid-connected photovoltaic power systemsElective
HLTAID001 - Provide cardiopulmonary resuscitationProvide cardiopulmonary resuscitationElective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 40

Classifications

SchemeCodeClassification value
Qualification/Course Level of Education Identifier 511 Certificate IV 
Taxonomy - Industry Sector N/A Electrotechnology 
Taxonomy - Occupation N/A Renewable Energy Engineer 

Classification history

SchemeCodeClassification valueStart dateEnd date
Qualification/Course Level of Education Identifier 511 Certificate IV 05/Oct/2020 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package

Qualification Description

This qualification provides competencies to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in buildings and premises.

It includes requirements and competencies to select, install, set up, test, fault find, repair and maintain stand-alone renewable energy (RE) equipment and systems.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

The entry requirement for this qualification is:

  • UEE30820 Certificate III in Electrotechnology Electrician

or

  • a current 'Unrestricted Electricians Licence' or its equivalent issued in an Australian state or territory.

Packaging Rules

A total of 440 weighting points  comprising:

280 core weighting points  listed below; plus 

160 general elective weighting points  from the general elective units listed below.

Choose a total of 160 weighting points  elective units from the list below, of which between 0 and 50 weighting points  can be taken from Group A; between 0 and 120 weighting points  can be taken from Group B; and between 40 and 160 weighting points  can be taken from Group C (or all 160 elective weighting points  can be taken from Group C).

Up to 50 weighting points of the general elective units Group A,  may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided that selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.

Core units  

Weighting Points 

UEECD0010

Compile and produce an energy sector detailed report

60

UEECD0024

Implement and monitor energy sector WHS policies and procedures

20

UEECD0027

Participate in development and follow a personal competency development plan

20

UEERE0015

Implement and monitor energy sector environmental and sustainable policies and procedures

20

UEERE0022

Solve basic problems in photovoltaic energy apparatus and systems*

20

UEERE0025

Carry out basic repairs to renewable energy (RE) apparatus*

80

UEERE0034

Diagnose and rectify faults in renewable energy (RE) control systems*

60

Group A: Imported and common elective units 

Weighting Points 

BSBCUS201

Deliver a service to customers

20

CPCCWHS1001

Prepare to work safely in the construction industry

10

HLTAID001

Provide cardiopulmonary resuscitation

10

ICTICT203

Operate application software packages

20

UEECD0011

Comply with scheduled and preventative maintenance program processes

20

UEECD0035

Provide basic instruction in the use of electrotechnology apparatus

20

UEECO0002

Maintain documentation

20

UEECO0015

Provide quotations for installation or service jobs

20

UEECO0017

Source and purchase material/parts for installation or service jobs

20

Group B: Qualification elective units. 

Weighting Points 

UEECS0033

Use engineering applications software on personal computers

40

UEEEL0013

Install, set up and commission interval metering*

20

UEEIC0002

Assemble, enter and verify operating instructions in microprocessor equipped devices*

20

UEEIC0013

Develop, enter and verify discrete control programs for programmable controllers*

60

UEERE0016

Install, configure and commission LV grid-connected photovoltaic power systems*

40

UEERE0019

Maintain safety and tidiness of remote area power supply systems*

20

UEERE0023

Work safely with remote area power supply systems*

20

UEERE0035

Install ELV stand-alone photovoltaic power systems*

60

UEERE0036

Install small wind energy conversion systems rated up to 10 kW for ELV stand-alone applications*

20

UEERE0037

Install, configure and commission LV micro-hydro systems rated up to 6.4 kW*

20

UEERE0038

Install, configure and commission LV wind energy conversion systems rated up to 10 kW*

40

UEERE0039

Install, set up and maintain ELV micro-hydro systems rated up to 6.4 kW*

20

UEERE0045

Solve basic problems in micro-hydro systems*

20

UEERE0046

Solve problems in stand-alone renewable energy (RE) systems*

60

UEERE0047

Solve problems in wind energy conversion systems (WECS) rated up to 10 kW*

60

UEERE4001

Install, maintain and fault find battery storage systems for grid-connected photovoltaic systems*

60

UEERE5001

Design battery storage systems for grid-connected photovoltaic systems*

80

Group C: Qualification elective units 

Weighting Points 

UEEEL0050

Install and replace low voltage current transformer metering*

20

UEERE0003

Assess energy loads and uses for energy efficiency in commercial facilities*

40

UEERE0004

Assess energy loads and uses for energy efficiency in industrial properties and enterprises*

40

UEERE0005

Assess energy loads and uses for energy efficiency in residential, office and retail premises*

40

UEERE0011

Design grid-connected photovoltaic power supply systems*

60

UEERE0014

Develop strategies to address sustainability issues for electrical installations*

20

UEERE0027

Coordinate maintenance of renewable energy (RE) apparatus and systems*

20

Qualification Mapping Information

This qualification replaces and is not equivalent to UEE41911 Certificate IV in Electrical - Renewable Energy

Links

Companion Volume implementation guides are found in VETNet - - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6