Modification History
|
Release |
Action |
Core/Elective |
Details |
Points |
|
2 |
Edit |
Edit Name to reflect correct Unit title UEENEED104A Use engineering applications software on personal computers |
40 |
|
|
2 |
Update |
Group A |
HLTCPR211A Perform CPR |
10 |
|
3 |
Edit |
Core |
Edit Name to reflect correct Unit title UEENEEK145A Implement and monitor energy sector environmental and sustainable policies and procedures |
20 |
|
4 |
Update |
Elective |
HLTAID001 - Provide cardiopulmonary resuscitation |
10 |
|
4 |
Edit |
Core |
Correct title of UEENEEE101A - Apply Occupational Health and Safety regulations, codes and practices in the workplace |
20 |
|
4 |
Edit |
Core |
Correct title of UEENEEE102A - Fabricate, assemble and dismantle utilities industry components |
40 |
|
4 |
Edit |
Core |
Correct title of UEENEEJ102A - Prepare and connect refrigerant tubing and fittings |
30 |
|
4 |
Edit |
Elective |
Correct title of UEENEED101A - Use computer applications relevant to a workplace |
20 |
|
4 |
Edit |
Elective |
Correct title of UEENEEE114A - Supervise and coordinate energy sector work activities |
40 |
|
4 |
Edit |
Elective |
Correct title of UEENEEI116A - Assemble, enter and verify operating instructions in microprocessor equipped devices |
20 |
Description
Scope
This qualification provides competencies to select, install, commission, fault find and maintain electrical systems and equipment in buildings and premises and split air-conditioning systems to a prescribed routine where the maximum plant capacity for each system does not exceed 18 kWr. It includes ERAC requirements for an ‘Electrician’s licence’ and regulatory requirements for purchasing and handling refrigerants for split systems.
Split systems include wall hung, floor and ceiling suspended, cassette and ducted fan coil split systems. This qualification excludes competencies required for service, repair, maintenance, or the safe and proper installation of commercial refrigeration and air conditioning plant and equipment.
Note:
1. The letter “r” denotes “refrigeration” or cooling capacity, not electrical input power.
2. The Ozone Protection and Synthetic Greenhouse Gas Legislation Amendment Bill 2003 and the Ozone Protection and Synthetic Gas Management Regulations apply to this qualification. Prior to planning the delivery of any training and/or assessment activities all legislative and regulatory requirements shall be identified and included.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
Not applicable.
Packaging Rules
Completion requirements
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- All the Core competency standard units, defined in the Core Competency Standard Units table below and
- A combination of Elective competency standard units to achieve a total weighting of 160 points in accordance with the Elective Competency Standard Units table below.
Note: UEENEEG105A - Those holding an ‘Unrestricted Electricians Licence or equivalent issued in an Australian State or Territory meets the requirements of this unit and its pre-requisite requirements.
|
Core Competency Standard Units All Core competency standard units to be achieved |
Weighting Points |
|
|
UEENEEE038B |
Participate in development and follow a personal competency development plan |
20 |
|
UEENEEE101A |
Apply Occupational Health and Safety regulations, codes and practices in the workplace |
20 |
|
UEENEEE102A |
Fabricate, assemble and dismantle utilities industry components |
40 |
|
UEENEEE104A |
Solve problems in d.c. circuits |
80 |
|
UEENEEE105A |
Fix and secure electrotechnology equipment |
20 |
|
UEENEEE107A |
Use drawings, diagrams, schedules, standards, codes and specifications |
40 |
|
UEENEEE117A |
Implement and monitor energy sector OHS policies and procedures |
20 |
|
UEENEEE124A |
Compile and produce an energy sector detailed report |
60 |
|
UEENEEE137A |
Document and apply measures to control OHS risks associated with electrotechnology work |
20 |
|
UEENEEG006A |
Solve problems in single and three phase low voltage machines |
80 |
|
UEENEEG033A |
Solve problems in single and three phase low voltage electrical apparatus and circuits |
60 |
|
UEENEEG063A |
Arrange circuits, control and protection for general electrical installations |
40 |
|
UEENEEG101A |
Solve problems in electromagnetic devices and related circuits |
60 |
|
UEENEEG102A |
Solve problems in low voltage a.c. circuits |
80 |
|
UEENEEG103A |
Install low voltage wiring and accessories |
20 |
|
UEENEEG104A |
Install appliances, switchgear and associated accessories for low voltage electrical installations |
20 |
|
UEENEEG105A |
Verify compliance and functionality of low voltage general electrical installations |
40 |
|
UEENEEG106A |
Terminate cables, cords and accessories for low voltage circuits |
40 |
|
UEENEEG107A |
Select wiring systems and cables for low voltage general electrical installations |
60 |
|
UEENEEG108A |
Trouble-shoot and repair faults in low voltage electrical apparatus and circuits |
40 |
|
UEENEEG109A |
Develop and connect electrical control circuits |
80 |
|
UEENEEJ102A |
Prepare and connect refrigerant tubing and fittings |
30 |
|
UEENEEJ105A |
Position, assemble and start up single head split air conditioning and water heating heat pump systems |
70 |
|
UEENEEJ172A |
Recover, pressure test, evacuate, charge and leak test refrigerants - split systems |
60 |
|
UEENEEK145A |
Implement and monitor energy sector environmental and sustainable policies and procedures |
20 |
|
Total points in core |
1120 |
|
|
Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 160 points from the following groups: |
|||
|
Group |
Minimum points |
Maximum points |
|
|
A |
Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. |
0 |
80 |
|
B |
Qualification Elective Units |
0 |
80 |
|
C |
Qualification Elective Units You may select all your elective units from this Group |
80 |
160 |
|
Group A – Imported and Common Elective Units You may complete units to a maximum weighting of 80 |
Weighting Points |
|
|
UEENEEC001B |
Maintain documentation |
20 |
|
UEENEEC002B |
Source and purchase material/parts for installation or service jobs |
20 |
|
UEENEEC003B |
Provide quotations for installation or service jobs |
20 |
|
UEENEEC010B |
Deliver a service to customers |
20 |
|
UEENEED101A |
Use computer applications relevant to a workplace |
20 |
|
UEENEEE009B |
Comply with scheduled and preventative maintenance program processes |
20 |
|
UEENEEE020B |
Provide basic instruction in the use of electrotechnology apparatus |
20 |
|
CPCCOHS1001A |
Work safely in the construction industry |
10 |
|
HLTAID001 |
Provide cardiopulmonary resuscitation |
10 |
|
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework |
Up to 80 points |
|
|
Group B – Qualification Elective Units You may complete units to a maximum weighting of 80 |
Weighting Points |
|
|
UEENEED104A |
Use engineering applications software on personal computers |
40 |
|
UEENEEI116A |
Assemble, enter and verify operating instructions in microprocessor equipped devices |
20 |
|
UEENEEI150A |
Develop, enter and verify discrete control programs for programmable controllers |
60 |
|
UEENEEJ103A |
Establish the basic operating conditions of vapour compression systems |
60 |
|
UEENEEJ104A |
Establish the basic operating conditions of air conditioning systems |
20 |
|
UEENEEJ174A |
Apply safety awareness and legal requirements for hydrocarbon refrigerants |
10 |
|
Group C – Qualification Elective Units You must complete units to a minimum weighting of 80 You may select all your elective units from this Group |
Weighting Points |
|
|
UEENEEE114A |
Supervise and coordinate energy sector work activities |
40 |
|
UEENEEG122A |
Conduct compliance inspection of single phase LV electrical installations |
60 |
|
UEENEEG123A |
Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase |
40 |
|
UEENEEJ192A |
Analyse the psychrometric performance of HVAC/R systems |
50 |
|
UEENEEJ193A |
Analyse the thermodynamic performance of HVAC/R systems |
40 |
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
END OF QUALIFICATION
Custom Content Section
Not applicable.
