Qualification details

Release 3. Updated superseded elective units.

Release 2. Incorrect reference to the Group C general elective requirements fixed. Imported unit codes updated.

Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package

This qualification covers competencies to select, install, commission, fault find and maintain equipment and systems for the control of plant, machines and processes.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

The entry requirement for this qualification is:

• UEE30820 Certificate III in Electrotechnology Electrician

or

• a current ‘Unrestricted Electricians Licence’ or its equivalent issued in an Australian state or territory.

A total of 440 weighting points  comprising:

320 core weighting points  listed below; plus 

120 general elective weighting points  from the general elective units listed below.

Choose a total of 120 weighting points  elective units from the list below, of which between 0 and 60 weighting points  can be taken from Group A; and between 0 and 60 weighting points  can be taken from Group B; and between 60 and 120 weighting points  must be taken from Group C (or all 120 elective weighting points  can be taken from Group C).

Up to 60 weighting points of the general elective units Group A , may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.

Core units  

Weighting Points 

UEECD0010

Compile and produce an energy sector detailed report

60

UEECD0024

Implement and monitor energy sector WHS policies and procedures

20

UEECD0027

Participate in development and follow a personal competency development plan

20

UEEIC0038

Solve problems in density/level measurement components and systems*

40

UEEIC0039

Solve problems in flow measurement components and systems*

40

UEEIC0041

Solve problems in pressure measurement components and systems*

40

UEEIC0043

Solve problems in temperature measurement components and systems*

40

UEEIC0047

Use instrumentation drawings, specifications, standards and equipment manuals*

40

UEERE0015

Implement and monitor energy sector environmental and sustainable policies and procedures

20

Group A: Imported and common elective units 

Weighting Points 

BSBOPS203

Deliver a service to customers

20

CPCWHS1001

Prepare to work safely in the construction industry

10

HLTAID009

Provide cardiopulmonary resuscitation

10

ICTICT214

Operate application software packages

20

UEECD0011

Comply with scheduled and preventative maintenance program processes

20

UEECD0035

Provide basic instruction in the use of electrotechnology apparatus

20

UEECO0002

Maintain documentation

20

UEECO0015

Provide quotations for installation or service jobs

20

UEECO0017

Source and purchase material/parts for installation or service jobs

20

Group B: General elective units 

Weighting Points 

UEECS0033

Use engineering applications software on personal computers

40

UEEEC0060

Repairs basic electronic apparatus faults by replacement of components*

40

UEEEC0075

Troubleshoot single phase input d.c power supplies*

40

UEEEL0053

Maintain operation of electrical marine equipment and systems*

60

UEEEL0054

Maintain operation of electrical mining equipment and systems*

60

UEEHA0004

Enter a classified hazardous area to undertake work related to electrical equipment

40

UEEHA0020

Conduct detailed inspection of electrical installations for hazardous areas*

40

UEEHA0022

Determine the explosion-protection requirements to meet a specified classified hazardous area*

40

UEEHA0025

Install explosion-protected equipment and associated apparatus and wiring systems*

60

UEEHA0026

Maintain equipment associated with hazardous areas*

60

UEEHA0038

Conduct visual and close inspection of electrical installations for hazardous areas*

40

UEEIC0002

Assemble, enter and verify operating instructions in microprocessor equipped devices*

20

UEEIC0011

Develop electrical integrated systems*

20

UEEIC0013

Develop, enter and verify discrete control programs for programmable controllers*

60

UEEIC0021

Find and rectify faults in process final control elements*

40

UEEIC0022

Install instrumentation and control apparatus and associated equipment*

20

UEEIC0023

Install instrumentation and control cabling and tubing*

20

UEEIC0024

Plan the electrical installation of integrated systems*

20

UEEIC0029

Set up and adjust PID control loops*

40

UEEIC0030

Set up and adjust advanced PID process control loops*

40

UEEIC0031

Set up and configure human-machine interface (HMI) and industrial networks*

60

Group C: General elective units

Weighting Points

UEEIC0014

Develop, enter and verify programs in supervisory control and data acquisition systems*

60

UEEIC0015

Develop, enter and verify word and analogue control programs for programmable logic controllers*

60

UEEIC0018

Diagnose and rectify faults in digital controls systems*

60

UEEIC0020

Fault find and repair analogue circuits and components in electronic control systems*

60

UEEIC0026

Provide solutions to fluid circuit operations*

60

UEEIC0027

Provide solutions to pneumatic-hydraulic system operations*

80

UEEIC0028

Provide solutions to problems in industrial control systems*

60

UEEIC0034

Set up industrial field control devices*

60

UEEIC0040

Solve problems in polyphase electronic power control circuits*

60

UEEIC0042

Solve problems in single phase electronic power control circuits*

60

This qualification replaces and is not equivalent to UEE40411 Certificate IV in Electrical - Instrumentation