^

 
 

Qualification details

UEE40320 - Certificate IV in Installation Inspection and Audits (Release 1)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes UEE40311 - Certificate IV in Installation Inspection and Audits 04/Oct/2020

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 05/Oct/2020


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssentialSort Table listing Units of Competency by the Essential column
UEEEL0069 - Select and arrange equipment for special LV electrical installationsSelect and arrange equipment for special LV electrical installationsElective
ICTICT203 - Operate application software packagesOperate application software packagesElective
CPCCWHS1001 - Prepare to work safely in the construction industryPrepare to work safely in the construction industryElective
UEERE0016 - Install, configure and commission LV grid-connected photovoltaic power systemsInstall, configure and commission LV grid-connected photovoltaic power systemsElective
HLTAID001 - Provide cardiopulmonary resuscitationProvide cardiopulmonary resuscitationElective
UEEEL0049 - Install and maintain emergency safety systemsInstall and maintain emergency safety systemsElective
UEEEL0040 - Develop compliance policies and plans to conduct an electrical contracting businessDevelop compliance policies and plans to conduct an electrical contracting businessElective
UEEEL0059 - Plan low voltage switchboard and control panel layoutsPlan low voltage switchboard and control panel layoutsElective
UEEEL0045 - Diagnose and rectify faults in traction lift systemsDiagnose and rectify faults in traction lift systemsElective
UEEEL0013 - Install, set up and commission interval meteringInstall, set up and commission interval meteringElective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 37

Classifications

SchemeCodeClassification value
ANZSCO Identifier 341111 Electrician (General) 
ASCED Qualification/Course Field of Education Identifier 0313 Electrical And Electronic Engineering And Technology 
Qualification/Course Level of Education Identifier 511 Certificate IV 
Taxonomy - Industry Sector N/A Electrotechnology 
Taxonomy - Occupation N/A Installation Technician (Inspection and Audits) 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 341111 Electrician (General) 17/Dec/2020 
ASCED Qualification/Course Field of Education Identifier 0313 Electrical And Electronic Engineering And Technology 17/Dec/2020 
Qualification/Course Level of Education Identifier 511 Certificate IV 05/Oct/2020 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package

Qualification Description

This qualification covers competencies in mandatory and contractual inspections of electrical systems and auditing of entities for compliance with electrical safety requirements.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

The entry requirement for this qualification is:

  • UEE30820 Certificate III in Electrotechnology Electrician

or

  • a current 'Unrestricted Electricians Licence' or its equivalent issued in an Australian state or territory.

Packaging Rules

A total of 440 weighting points  comprising:

220 core weighting points  listed below; plus 

220 general elective weighting points  from the general elective units listed below.

Choose a total of 220 weighting points  elective units from the list below, of which between 0 and 80 weighting points  can be taken from Group A; between 0 and 110 weighting points  can be taken from Group B; and between 110 and 220 weighting points  must be taken from Group C (or all elective weighting points  can be taken from Group C).

Up to 80 weighting points of the general elective units Group A , may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.

Core units  

Weighting Points 

UEECD0010

Compile and produce an energy sector detailed report

60

UEECD0024

Implement and monitor energy sector WHS policies and procedures

20

UEECD0027

Participate in development and follow a personal competency development plan

20

UEEEL0029

Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase*

40

UEEEL0030

Conduct compliance inspection of single phase LV electrical installations*

60

UEERE0015

Implement and monitor energy sector environmental and sustainable policies and procedures

20

Group A: Imported and common elective units 

Weighting Points 

BSBCUS201

Deliver a service to customers

20

CPCCWHS1001

Prepare to work safely in the construction industry

10

HLTAID001

Provide cardiopulmonary resuscitation

10

ICTICT203

Operate application software packages

20

UEECO0002

Maintain documentation

20

Group B: General elective units 

Weighting Points 

UEECS0033

Use engineering applications software on personal computers

40

UEEEL0013

Install, set up and commission interval metering*

20

UEEEL0045

Diagnose and rectify faults in traction lift systems*

80

UEEEL0049

Install and maintain emergency safety systems*

60

UEEEL0053

Maintain operation of electrical marine equipment and systems*

60

UEEEL0054

Maintain operation of electrical mining equipment and systems*

60

UEEEL0069

Select and arrange equipment for special LV electrical installations*

60

UEEHA0001

Conduct detailed inspection of electrical installations for hazardous areas*

40

UEEHA0002

Conduct visual and close inspection of electrical installations for hazardous areas*

40

UEEHA0003

Determine the explosion-protection requirements to meet a specified classified hazardous area*

40

UEEHA0004

Enter a classified hazardous area to undertake work related to electrical equipment

40

UEEHA0006

Maintain equipment associated with hazardous areas*

60

UEEIC0011

Develop electrical integrated systems*

20

UEEIC0024

Plan the electrical installation of integrated systems*

20

UEEIC0047

Use instrumentation drawings, specifications, standards and equipment manuals*

40

UEERE0016

Install, configure and commission LV grid-connected photovoltaic power systems*

40

UEERE0022

Solve basic problems in photovoltaic energy apparatus and systems*

20

Group C: General elective units 

Weighting Points 

UEEEL0027

Carry out low voltage electrical field testing and report findings*

60

UEEEL0031

Conduct compliance inspection of special LV electrical installations*

60

UEEEL0040

Develop compliance policies and plans to conduct an electrical contracting business*

80

UEEEL0044

Diagnose and rectify faults in complex lift systems*

40

UEEEL0051

Investigate and report on electrical incidents and causes*

60

UEEEL0057

Plan electrical installations with a low voltage demand up to 400 A per phase*

40

UEEEL0059

Plan low voltage switchboard and control panel layouts*

40

UEEEL0072

Set up and place LV electrical apparatus and associated circuits into service*

40

UEEEL0073

Verify compliance and functionality of special LV electrical installations*

40

Qualification Mapping Information

This qualification replaces and is not equivalent to UEE40311 Certificate IV in Installation Inspection and Audits

Links

Companion Volume implementation guides are found in VETNet - - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6