Modification History
|
Release |
Action |
Core/Elective |
Details |
Points |
|
2 |
Add |
Group B |
UETTDRIS67A Solve problems in energy supply network equipment |
80 |
|
2 |
Add |
Group B |
UETTDRIS68A Solve problems in energy supply network protection equipment and systems |
40 |
|
2 |
Add |
Group B |
UETTDRIS44A Perform HV field switching operation to a given schedule |
60 |
|
2 |
Update |
Group A |
HLTCPR211A Perform CPR |
10 |
|
2 |
Update |
Group A |
HLTFA311A Apply first aid |
10 |
|
2 |
Edit |
Edit Name to reflect correct Unit title UEENEED104A Use engineering applications software on personal computers |
40 |
Description
Scope
This qualification provides competencies to manufacture, fit, assemble, erect, operate, test, fault find, alter, repair electrical equipment and includes electrical wiring work only if that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within a plant or machinery. An electrical fitter is not authorised to install any electrical wiring systems within an electrical installation as prescribed by definitions contained in AS/NZS 3000.
Electrical equipment means any appliance, article, accessory, wire, fitting, cable, conduit or apparatus that generates, uses, conveys or controls (or that is intended to generate, use, convey or control) electricity above extra low voltage.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
Not applicable.
Packaging Rules
Completion requirements
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- All the Core competency standard units, defined in the Core Competency Standard Units table below and
- A combination of Elective competency standard units to achieve a total weighting of 240 points in accordance with the Elective Competency Standard Units table below.
|
Core Competency Standard Units All Core competency standard units to be achieved |
Weighting Points |
|
|
UEENEEC020B |
Participate in electrical competency development plan |
60 |
|
UEENEEE101A |
Apply Occupational Health Safety regulations, codes and practices in the workplace |
20 |
|
UEENEEE102A |
Fabricate, dismantle, assemble utilities components |
40 |
|
UEENEEE104A |
Solve problems in d.c. circuits |
80 |
|
UEENEEE105A |
Fix and secure electrotechnology equipment |
20 |
|
UEENEEE107A |
Use drawings, diagrams, schedules, standards, codes and specifications |
40 |
|
UEENEEE137A |
Document and apply measures to control OHS risks associated with electrotechnology work |
20 |
|
UEENEEG006A |
Solve problems in single and three phase low voltage machines |
80 |
|
UEENEEG033A |
Solve problems in single and three phase low voltage electrical apparatus and circuits |
60 |
|
UEENEEG063A |
Arrange circuits, control and protection for general electrical installations |
40 |
|
UEENEEG101A |
Solve problems in electromagnetic devices and related circuits |
60 |
|
UEENEEG102A |
Solve problems in low voltage a.c. circuits |
80 |
|
UEENEEG106A |
Terminate cables, cords and accessories for low voltage circuits |
40 |
|
UEENEEG108A |
Trouble-shoot and repair faults in low voltage electrical apparatus and circuits |
40 |
|
UEENEEG109A |
Develop and connect electrical control circuits |
80 |
|
UEENEEG199A |
Verify compliance and functionality of existing circuits |
40 |
|
UEENEEK142A |
Apply environmental and sustainable procedures in the energy sector |
20 |
|
Total points in core |
820 |
|
|
Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 240 points from the following groups: |
|||
|
Group |
Minimum points |
Maximum points |
|
|
A |
Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. |
0 |
60 |
|
B |
Qualification Elective Units You may select all your elective units from this Group |
180 |
240 |
|
Group A – Imported and Common Elective Units You may complete units to a maximum weighting of 60 |
Weighting Points |
|
|
UEENEEC001B |
Maintain documentation |
20 |
|
UEENEEC002B |
Source and purchase material/parts for installation or service jobs |
20 |
|
UEENEEC003B |
Provide quotations for installation or service jobs |
20 |
|
UEENEEC010B |
Deliver a service to customers |
20 |
|
UEENEED101A |
Use basic computer applications relevant to a workplace |
20 |
|
UEENEEE009B |
Comply with scheduled and preventative maintenance program processes |
20 |
|
UEENEEE020B |
Provide basic instruction in the use of electrotechnology apparatus |
20 |
|
CPCCOHS1001A |
Work safely in the construction industry |
10 |
|
HLTCPR211A |
Perform CPR |
10 |
|
HLTFA311A |
Apply first aid |
10 |
|
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework |
Up to 60 points |
|
|
Group B – Qualification Elective Units Complete units to a minimum weighting of 180 You may select all your elective units from this Group |
Weighting Points |
|
|
UEENEEA110A |
Assemble, mount and connect switchgear and controlgear |
40 |
|
UEENEEA112A |
Make up and assemble bus bars |
60 |
|
UEENEEA113A |
Assemble and wire control panels |
40 |
|
UEENEED104A |
Use engineering applications software on personal computers |
40 |
|
UEENEEF102A |
Install and maintain cabling for multiple access to telecommunication services |
120 |
|
UEENEEF104A |
Install and modify performance data communication copper cabling |
40 |
|
UEENEEF115A |
Assemble and connect telecommunication frames and cabinets |
60 |
|
UEENEEG110A |
Diagnose and rectify faults in d.c. electrical apparatus and circuits |
60 |
|
UEENEEG111A |
Carry out repairs to electrical apparatus |
40 |
|
UEENEEG116A |
Diagnose and rectify faults in lifts/escalator systems |
80 |
|
UEENEEG118A |
Maintain operation of electrical mining equipment and systems |
60 |
|
UEENEEG119A |
Maintain the operation of electrical marine equipment and systems |
60 |
|
UEENEEG129A |
Overhaul and repair switchgear and controlgear |
60 |
|
UEENEEG150A |
Wind electrical coils |
40 |
|
UEENEEG151A |
Place and connect electrical coils |
40 |
|
UEENEEG152A |
Rewind single phase machines |
40 |
|
UEENEEG153A |
Rewind LV three phase induction machines rated for low voltage |
60 |
|
UEENEEG154A |
Rewind LV direct current machines |
60 |
|
UEENEEG157A |
Conduct electrical tests on LV electrical machines |
40 |
|
UEENEEG159A |
Conduct mechanical tests of LV electrical machines |
40 |
|
UEENEEG164A |
Repair mechanical and electrical components of electrical machines |
40 |
|
UEENEEG165A |
Maintain and service electrical traction lifts |
40 |
|
UEENEEG166A |
Installation and maintenance of escalators, tread ways and moving walks |
40 |
|
UEENEEG167A |
Align and install lift components and equipment |
20 |
|
UEENEEG181A |
Provide advice on effective and energy efficient lighting products |
20 |
|
UEENEEG182A |
Supply effective and efficient lighting products for domestic and small commercial applications |
40 |
|
UEENEEG183A |
Provide advice on the application of energy efficient lighting for ambient and aesthetic effect |
20 |
|
UEENEEH102A |
Repair basic electronic apparatus faults by replacement of components |
40 |
|
UEENEEH111A |
Troubleshoot single phase input d.c. power supplies |
40 |
|
UEENEEI101A |
Use instrumentation drawings, specifications, standards and equipment manuals |
40 |
|
UEENEEI102A |
Solve problems in pressure measurement circuits and systems |
40 |
|
UEENEEI103A |
Solve problems in density/level measurement circuits and systems |
40 |
|
UEENEEI104A |
Solve problems in flow measurement circuits and systems |
40 |
|
UEENEEI105A |
Solve problems in temperature measurement circuits and systems |
40 |
|
UEENEEI107A |
Install process instrumentation and tubing and control cabling |
20 |
|
UEENEEI108A |
Install process control apparatus and associated equipment |
20 |
|
UEENEEI116A |
Enter and verify operating instructions in microprocessor equipped devices |
20 |
|
UEENEEI150A |
Develop, enter and verify discrete control programs for programmable controllers |
60 |
|
UEENEEJ102A |
Prepare and connect refrigerant tubing and fittings |
30 |
|
UEENEEJ103A |
Establish the basic operating conditions of vapour compression systems |
60 |
|
UEENEEJ104A |
Establish the basic operating conditions of air conditioning systems |
20 |
|
UEENEEJ105A |
Position, assemble and start up single head split air conditioning and water heating heat pump systems |
70 |
|
UEENEEJ106A |
Install refrigerant pipe work, flow controls and accessories |
60 |
|
UEENEEJ108A |
Recover, pressure test, evacuate, charge and leak test refrigerants |
60 |
|
UEENEEJ151A |
Service small electrical appliances and power tools |
60 |
|
UEENEEJ153A |
Find and rectify fault motors and associated controls in refrigeration and air conditioning |
50 |
|
UEENEEJ154A |
Find and rectify faults in appliance control systems and devices |
60 |
|
UEENEEJ155A |
Service refrigeration appliances |
60 |
|
UEENEEJ156A |
Service clothes washing machines and dryers |
40 |
|
UEENEEJ157A |
Service electrical heating appliances |
60 |
|
UEENEEJ158A |
Service dishwasher machines |
40 |
|
UEENEEJ159A |
Service gas heating appliances |
40 |
|
UEENEEJ162A |
Recover, pressure test, evacuate, charge and leak test refrigerants — appliances |
50 |
|
UEENEEJ170A |
Diagnose and rectify faults in air conditioning and refrigeration control systems |
70 |
|
UEENEEJ173A |
Service and repair microwave ovens |
40 |
|
UEENEEJ194A |
Solve problems in low voltage refrigeration circuits |
40 |
|
UEENEEJ195A |
Establish the basic operating conditions of vapour compression systems - appliances |
50 |
|
UEENEEM019A |
Attend to breakdowns in hazardous areas — coal mining |
20 |
|
UEENEEM020A |
Attend to breakdowns in hazardous areas — gas atmospheres |
20 |
|
UEENEEM021A |
Attend to breakdowns in hazardous areas — dust atmospheres |
20 |
|
UEENEEM022A |
Attend to breakdowns in hazardous areas — pressurisation |
20 |
|
UEENEEM027A |
Maintain equipment in hazardous areas — coal mining |
60 |
|
UEENEEM028A |
Maintain equipment in hazardous areas — gas atmospheres |
60 |
|
UEENEEM029A |
Maintain equipment in hazardous areas — dust atmospheres |
60 |
|
UEENEEM030A |
Maintain equipment in hazardous areas — pressurisation |
60 |
|
UEENEEM031A |
Overhaul and repair of explosion-protected equipment — coal mining |
60 |
|
UEENEEM032A |
Overhaul and repair of explosion-protected equipment — flameproof enclosures |
60 |
|
UEENEEM033A |
Overhaul and repair of explosion-protected equipment — gas atmospheres |
60 |
|
UEENEEM034A |
Overhaul and repair of explosion-protected equipment — dust atmospheres |
40 |
|
UEENEEM060A |
Carry out overhaul and repair of explosion-protected equipment — coal mining |
60 |
|
UEENEEM061A |
Carry out overhaul and repair of explosion-protected equipment — flameproof enclosures |
60 |
|
UEENEEM062A |
Carry out overhaul and repair of explosion-protected equipment — gas atmospheres |
60 |
|
UEENEEM063A |
Carry out overhaul and repair of explosion-protected equipment — dust atmospheres |
60 |
|
UEENEEM070A |
Repair reeling, trailing and flexible cables |
60 |
|
UEENEEM071A |
Test reeling, trailing and flexible cables |
60 |
|
UEENEEM072A |
Inspect and fit plugs/couplers for reeling, trailing and flexible cables |
60 |
|
UEENEEM073A |
Verify compliance of repaired reeling, trailing and flexible cables |
60 |
|
UEENEEM076A |
Use and maintain the integrity of a portable gas detection device |
20 |
|
UEENEEM077A |
Install and maintain the integrity of fixed gas detection equipment |
20 |
|
UEENEEM080A |
Report on the integrity of explosion-protected equipment in a hazardous area |
20 |
|
UEENEEN102A |
Assemble and wire internal electrical rail signalling equipment |
30 |
|
UEENEEN104A |
Test rail signalling cables |
20 |
|
UEENEEN121A |
Repair rail signalling power and control cables |
40 |
|
UEENEEP010A |
Disconnect / reconnect appliances connected to low voltage installation wiring |
60 |
|
UEENEEP011A |
Disconnect / reconnect neon signs connected to low voltage installation wiring |
60 |
|
UEENEEP014A |
Disconnect / reconnect water heaters connected to low voltage installation wiring |
60 |
|
UEENEEP016A |
Locate and rectify faults in low voltage appliances using set procedures |
20 |
|
UEENEEP019A |
Locate and rectify faults in low voltage water heaters using set procedures |
20 |
|
UEENEEP021A |
Disconnect / reconnect explosion-protected appliances and control devices connected to low voltage installation wiring |
60 |
|
UEENEEP022A |
Disconnect and reconnect 3.3 kV electric propulsion components of self-propelled earth moving vehicles |
60 |
|
UEENEEP023A |
Attach flexible cables and plugs to electrical equipment connected to a HV supply |
40 |
|
UETTDRIS43A |
Perform low voltage field switching operation to a given schedule. |
50 |
|
UETTDRIS44A |
Perform high voltage field switching operation to a given schedule |
40 |
|
UETTDRIS47A |
Sample, test, filter and reinstate insulating oil |
40 |
|
UETTDRIS67A |
Solve problems in energy supply network equipment |
80 |
|
UETTDRIS68A |
Solve problems in energy supply network protection equipment and systems |
40 |
|
UETTDRSB29A |
Maintain capacitor bank equipment for voltage regulation |
40 |
|
UETTDRSB39A |
Perform power system substation switching operation to a given schedule |
50 |
|
UETTDRIS67A |
Solve problems in energy supply network equipment |
80 |
|
UETTDRIS68A |
Solve problems in energy supply network protection equipment and systems |
40 |
|
UETTDRIS44A |
Perform HV field switching operation to a given schedule |
40 |
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
END OF QUALIFICATION
Custom Content Section
Not applicable.
