Modification History
Release 3. Updated superseded imported elective units. |
Release 2: This minor update is the second release of this qualification in the UEE Electrotechnology Training Package. An incorrect reference to the Group A general elective weighting point requirements was fixed. Imported units updated. |
Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package |
Qualification Description
This qualification covers competencies to set up, service and repair electrical and refrigerated appliances with electives in gas appliances. Competency development activities in this qualification are subject to regulations directly related to licencing. A relevant contract of training through an apprenticeship or relevant employment may be required to enable the application of the required knowledge and skills to on the job work activities and environments. Refrigerant Handling Licence: The achievement of the qualification meets the training components for the national restricted domestic refrigeration and air conditioning appliance Refrigerant Handling Licence, which is required to work on refrigeration and air conditioning equipment that carries the risk of a fluorocarbon refrigerant being emitted while decanting the refrigerant or manufacturing, installing, commissioning, servicing, maintaining or decommissioning refrigeration and air conditioning equipment. Refrigeration and Air Conditioning Occupational Licence: Additional and/or other conditions may apply in some jurisdictions subject to regulations related to domestic refrigerating and air conditioning appliance work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations. Electrical Occupation Licence: The achievement of this qualification with the core restricted electrical units meet the electrical regulatory requirements for related restricted electrical work in most state/territories. This is required to work on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c). |
Entry Requirements
There are no entry requirements for this qualification. |
Packaging Rules
A total of 1080 weighting points comprising: 870 core weighting points listed below; plus 210 general elective weighting points from the general elective units listed below. Choose a total of 210 weighting points elective units from the list below, of which between 0 and 100 weighting points can be taken from Group A; and between 110 and 210 weighting points must be taken from Group B; or all 210 elective unit weighting points can be taken from Group B. Up to 100 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC). There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume. Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with. |
||
Core units |
Weighting Points |
|
UEECD0007 |
Apply work health and safety regulations, codes and practices in the workplace |
20 |
UEECD0016 |
Document and apply measures to control WHS risks associated with electrotechnology work* |
20 |
UEECD0019 |
Fabricate, assemble and dismantle utilities industry components* |
40 |
UEECD0020 |
Fix and secure electrotechnology equipment* |
20 |
UEECD0042 |
Solve problems in ELV single path circuits* |
40 |
UEECD0051 |
Use drawings, diagrams, schedules, standards, codes and specifications* |
40 |
UEECO0004 |
Participate in appliance servicing work and competency development activities |
60 |
UEERA0037 |
Establish the basic operating conditions of vapour compression systems - appliances* |
50 |
UEERA0043 |
Find and rectify faults in appliance control systems and devices* |
60 |
UEERA0044 |
Find and rectify faults in single phase motors and associated controls* |
40 |
UEERA0045 |
Find and rectify faults in three phase motors and associated controls* |
30 |
UEERA0059 |
Prepare and connect refrigerant tubing and fittings* |
40 |
UEERA0063 |
Recover, pressure test, evacuate, charge and leak test refrigerants - appliances* |
50 |
UEERA0085 |
Service clothes washing machines and dryers* |
40 |
UEERA0089 |
Service refrigeration appliances* |
60 |
UEERA0091 |
Service small electrical appliances and power tools* |
60 |
UEERA0092 |
Solve problems in low voltage refrigeration and air conditioning circuits* |
40 |
UEERA0093 |
Verify functionality and compliance of appliances* |
20 |
UEERE0001 |
Apply environmentally and sustainable procedures in the energy sector |
20 |
UEERL0001 |
Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply* |
20 |
UEERL0002 |
Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.* |
20 |
UEERL0004 |
Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring* |
60 |
UEERL0005 |
Locate and rectify faults in low voltage (LV) electrical equipment using set procedures* |
20 |
Group A: Imported and common elective units |
Weighting Points |
|
BSBOPS203 |
Deliver a service to customers |
20 |
CPCWHS1001 |
Prepare to work safely in the construction industry |
10 |
HLTAID009 |
Provide cardiopulmonary resuscitation |
10 |
HLTAID011 |
Provide First Aid |
10 |
ICTICT214 |
Operate application software packages |
20 |
UEECD0011 |
Comply with scheduled and preventative maintenance program processes |
20 |
UEECD0035 |
Provide basic instruction in the use of electrotechnology apparatus |
20 |
UEECO0002 |
Maintain documentation |
20 |
UEECO0015 |
Provide quotations for installation or service jobs |
20 |
UEECO0017 |
Source and purchase material/parts for installation or service jobs |
20 |
Group B: Qualification elective units |
Weighting Points |
|
UEERA0006 |
Apply safety awareness and legal requirements for carbon dioxide refrigerant |
10 |
UEERA0007 |
Apply safety awareness and legal requirements for flammable refrigerants |
10 |
UEERA0035 |
Establish the basic operating conditions of air conditioning systems* |
20 |
UEERA0068 |
Repair and service self-contained carbon dioxide refrigeration and heat pump systems* |
20 |
UEERA0075 |
Resolve problems in post-mix refrigeration systems* |
20 |
UEERA0076 |
Resolve problems in refrigerated beverage vending cabinets* |
20 |
UEERA0083 |
Service and repair microwave ovens* |
40 |
UEERA0084 |
Service and repair self-contained flammable refrigerants air conditioning and refrigeration systems* |
20 |
UEERA0086 |
Service dishwasher machines* |
40 |
UEERA0087 |
Service electrical heating appliances* |
60 |
UEERA0088 |
Service gas heating appliances* |
40 |
UEERA0090 |
Service room air conditioners* |
30 |
Qualification Mapping Information
This qualification replaces and is equivalent to UEE32111 Certificate III in Appliance Service |
Links
Companion Volume Implementation Guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6