^

 
 

Qualification details

UEE30920 - Certificate III in Electronics and Communications (Release 1)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to UEE30911 - Certificate III in Electronics and Communications 04/Oct/2020

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 05/Oct/2020


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssentialSort Table listing Units of Competency by the Essential column
UEEAS0002 - Conduct quality and functional tests on assembled electronic apparatusConduct quality and functional tests on assembled electronic apparatusElective
UEEDV0013 - Solve problems in voice and data communications circuitsSolve problems in voice and data communications circuitsElective
ICTICT203 - Operate application software packagesOperate application software packagesElective
UEEEC0065 - Solve problems in basic electronic circuitsSolve problems in basic electronic circuitsElective
UEEEC0077 - Verify functionality and compliance of custom electronic installationsVerify functionality and compliance of custom electronic installationsElective
UEEIC0002 - Assemble, enter and verify operating instructions in microprocessor equipped devicesAssemble, enter and verify operating instructions in microprocessor equipped devicesElective
UEECO0017 - Source and purchase material/parts for installation or service jobsSource and purchase material/parts for installation or service jobsElective
UEEEC0048 - Program and commission commercial access control security systemsProgram and commission commercial access control security systemsElective
UEEIC0013 - Develop, enter and verify discrete control programs for programmable controllersDevelop, enter and verify discrete control programs for programmable controllersElective
UEEEC0039 - Install and test microwave antennae and waveguidesInstall and test microwave antennae and waveguidesElective
UEEEC0075 - Troubleshoot single phase input d.c power suppliesTroubleshoot single phase input d.c power suppliesCore
UEEEC0008 - Commission large fire protection systemsCommission large fire protection systemsElective
UEECS0030 - Set up, configure and test biometric devicesSet up, configure and test biometric devicesElective
UEECS0018 - Develop web pages for engineering applicationsDevelop web pages for engineering applicationsElective
UEERL0001 - Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supplyAttach cords and plugs to electrical equipment for connection to a single phase 230 Volt supplyElective
UEECD0043 - Solve problems in direct current circuitsSolve problems in direct current circuitsCore
UEERL0005 - Locate and rectify faults in low voltage (LV) electrical equipment using set proceduresLocate and rectify faults in low voltage (LV) electrical equipment using set proceduresElective
UEEAS0006 - Use lead-free soldering techniquesUse lead-free soldering techniquesElective
UEEEC0003 - Assemble and set up basic security systemsAssemble and set up basic security systemsElective
UEEEC0056 - Repair predictable faults in audio componentsRepair predictable faults in audio componentsElective
UEEDV0005 - Install and maintain cabling for multiple access to telecommunication servicesInstall and maintain cabling for multiple access to telecommunication servicesElective
UEERL0004 - Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiringDisconnect - reconnect electrical equipment connected to low voltage (LV) installation wiringElective
UEEEC0066 - Troubleshoot amplifiers in an electronic apparatusTroubleshoot amplifiers in an electronic apparatusCore
UEEEC0026 - Enter and verify programs for fire protection systemsEnter and verify programs for fire protection systemsElective
UEEEC0068 - Troubleshoot communication systemsTroubleshoot communication systemsElective
UEEEC0076 - Verify compliance and functionality of fire protection system installationsVerify compliance and functionality of fire protection system installationsElective
UEEDV0014 - Test, report and rectify faults in data and voice installationsTest, report and rectify faults in data and voice installationsElective
UEECD0007 - Apply work health and safety regulations, codes and practices in the workplaceApply work health and safety regulations, codes and practices in the workplaceCore
UEEEC0019 - Develop software solutions for microcontroller-based systemsDevelop software solutions for microcontroller-based systemsElective
BSBCUS201 - Deliver a service to customersDeliver a service to customersElective
UEEEC0004 - Assemble and set up fixed video/audio components and systems in buildings and premisesAssemble and set up fixed video/audio components and systems in buildings and premisesElective
UEEEC0032 - Fault find and repair high-volume office equipmentFault find and repair high-volume office equipmentElective
MSS402021 - Apply Just in Time proceduresApply Just in Time proceduresElective
UEEEC0071 - Troubleshoot fire protection systemsTroubleshoot fire protection systemsElective
UEERL0002 - Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.Elective
UEERE0001 - Apply environmentally and sustainable procedures in the energy sectorApply environmentally and sustainable procedures in the energy sectorCore
UEEEC0002 - Assemble and install reception antennae and signal distribution equipmentAssemble and install reception antennae and signal distribution equipmentElective
UEECD0035 - Provide basic instruction in the use of electrotechnology apparatusProvide basic instruction in the use of electrotechnology apparatusElective
UEEDV0009 - Select and arrange data and voice equipment for local area networksSelect and arrange data and voice equipment for local area networksElective
UEECD0051 - Use drawings, diagrams, schedules, standards, codes and specificationsUse drawings, diagrams, schedules, standards, codes and specificationsElective
UEECD0016 - Document and apply measures to control WHS risks associated with electrotechnology workDocument and apply measures to control WHS risks associated with electrotechnology workCore
MSS402081 - Contribute to the application of a proactive maintenance strategyContribute to the application of a proactive maintenance strategyElective
UEEEC0064 - Solve oscillator problemsSolve oscillator problemsElective
UEEEC0060 - Repairs basic electronic apparatus faults by replacement of componentsRepairs basic electronic apparatus faults by replacement of componentsCore
UEEEC0055 - Repair basic computer equipment faults by replacement of modules/sub-assembliesRepair basic computer equipment faults by replacement of modules/sub-assembliesElective
UEEDV0011 - Set up and configure basic data communication systemsSet up and configure basic data communication systemsElective
UEEAS0005 - Set up and check electronic component assembly machinesSet up and check electronic component assembly machinesElective
UEEEC0059 - Repair routine business equipment faultsRepair routine business equipment faultsElective
UEECS0020 - Evaluate and modify object-oriented code programsEvaluate and modify object-oriented code programsElective
UEEEC0058 - Repair predictable faults in television receiversRepair predictable faults in television receiversElective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 50 of 105

Classifications

SchemeCodeClassification value
ANZSCO Identifier 342313 Electronic Equipment Trades Worker 
ASCED Qualification/Course Field of Education Identifier 0313 Electrical And Electronic Engineering And Technology 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Electrotechnology 
Taxonomy - Occupation N/A Electronics and Communications Tradesperson,Electronics and Communications Tradesperson 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 342313 Electronic Equipment Trades Worker 05/Oct/2020 
ASCED Qualification/Course Field of Education Identifier 0313 Electrical And Electronic Engineering And Technology 05/Oct/2020 
Qualification/Course Level of Education Identifier 514 Certificate III 05/Oct/2020 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package

Qualification Description

This qualification covers competencies to select, install, set up, test, fault find, repair and maintain electronic equipment and devices at component/sub-assembly level with options in communications, audio, video and TV, personal computer and networks, security and custom installations.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

A total of 1060 weighting points  comprising:

680 core weighting points  listed below; plus 

380 elective weighting points  from the elective units listed below.

Up to 180 weighting points of the general elective units Group A,  may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.

Core units  

Weighting Points 

UEECD0007

Apply work health and safety regulations, codes and practices in the workplace

20

UEECD0016

Document and apply measures to control WHS risks associated with electrotechnology work*

20

UEECD0019

Fabricate, assemble and dismantle utilities industry components*

40

UEECD0043

Solve problems in direct current circuits*

80

UEECO0007

Participate in electronics and communications work and competency development activities

60

UEEEC0028

Fault find and repair complex power supplies*

40

UEEEC0060

Repairs basic electronic apparatus faults by replacement of components*

40

UEEEC0063

Solve fundamental electronic communications system problems*

40

UEEEC0066

Troubleshoot amplifiers in an electronic apparatus*

80

UEEEC0067

Troubleshoot basic amplifier circuits*

40

UEEEC0069

Troubleshoot digital sub-systems*

80

UEEEC0074

Troubleshoot resonance circuits in an electronic apparatus*

80

UEEEC0075

Troubleshoot single phase input d.c power supplies*

40

UEERE0001

Apply environmentally and sustainable procedures in the energy sector

20

Group A: Imported and common elective units. 

Weighting Points 

BSBCUS201

Deliver a service to customers

20

HLTAID003

Provide first aid

10

ICTICT203

Operate application software packages

20

ICTTEN312

Install telecommunications network equipment

40

MSS402001

Apply competitive systems and practices

20

MSS402020

Apply quick changeover procedures

20

MSS402021

Apply Just in Time procedures

20

MSS402040

Apply 5S procedures

20

MSS402080

Undertake root cause analysis

20

MSS402081

Contribute to the application of a proactive maintenance strategy

20

UEEAS0001

Assemble electronic components*

40

UEEAS0002

Conduct quality and functional tests on assembled electronic apparatus*

20

UEEAS0003

Modify electronic sub-assemblies*

40

UEEAS0004

Select electronic components for assembly*

20

UEEAS0005

Set up and check electronic component assembly machines*

40

UEEAS0006

Use lead-free soldering techniques*

40

UEECD0008

Carry out preparatory energy sector work activities*

60

UEECD0011

Comply with scheduled and preventative maintenance program processes

20

UEECD0020

Fix and secure electrotechnology equipment*

20

UEECD0021

Identify and select components, accessories and materials for energy sector work activities*

20

UEECD0025

Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits*

40

UEECD0028

Plan an integrated cabling installation system*

40

UEECD0035

Provide basic instruction in the use of electrotechnology apparatus

20

UEECD0040

Solve basic problems electronic and digital equipment and circuits*

80

UEECD0051

Use drawings, diagrams, schedules, standards, codes and specifications*

40

UEECO0002

Maintain documentation

20

UEECO0015

Provide quotations for installation or service jobs

20

UEECO0017

Source and purchase material/parts for installation or service jobs

20

UEEEC0046

Operate and maintain amateur radio communication stations*

40

UEECS0003

Assemble, set up and test computing devices*

80

UEECS0018

Develop web pages for engineering applications

40

UEECS0020

Evaluate and modify object-oriented code programs

40

UEECS0022

Install and configure a client computer operating system and software

40

UEECS0028

Select, install, configure and test multimedia components

40

UEECS0029

Set up and configure basic local area network (LAN)*

80

UEECS0030

Set up, configure and test biometric devices

40

UEECS0032

Support computer hardware and software for engineering applications

120

UEECS0033

Use engineering applications software on personal computers

40

UEEDV0004

Install and connect data and voice communication equipment*

40

UEEDV0005

Install and maintain cabling for multiple access to telecommunication services*

80

UEEDV0006

Install and modify optical fibre performance data communication cabling*

40

UEEDV0008

Install, modify and verify coaxial and structured communication copper cabling*

40

UEEDV0009

Select and arrange data and voice equipment for local area networks*

40

UEEDV0010

Select and arrange equipment for wireless communication networks*

40

UEEDV0011

Set up and configure basic data communication systems*

40

UEEDV0012

Set up and configure the wireless capabilities of communications and data storage devices

40

UEEDV0013

Solve problems in voice and data communications circuits*

40

UEEDV0014

Test, report and rectify faults in data and voice installations*

40

UEEEC0002

Assemble and install reception antennae and signal distribution equipment*

60

UEEEC0003

Assemble and set up basic security systems*

80

UEEEC0004

Assemble and set up fixed video/audio components and systems in buildings and premises*

120

UEEEC0006

Carry out repairs of predictable faults in video and audio replay/recording apparatus*

120

UEEEC0008

Commission large fire protection systems*

40

UEEEC0019

Develop software solutions for microcontroller-based systems*

60

UEEEC0026

Enter and verify programs for fire protection systems*

40

UEEEC0027

Enter instructions and test wired and wireless security systems*

40

UEEEC0029

Fault find and repair electronic apparatus*

40

UEEEC0032

Fault find and repair high-volume office equipment*

120

UEEEC0038

Find and repair microwave amplifier section faults in electronic apparatus*

40

UEEEC0039

Install and test microwave antennae and waveguides*

60

UEEEC0040

Install commercial video/audio system components*

120

UEEEC0041

Install fire detection and warning system apparatus*

40

UEEEC0042

Install large security systems*

100

UEEEC0048

Program and commission commercial access control security systems*

60

UEEEC0049

Program and commission commercial security closed-circuit television systems*

60

UEEEC0050

Program and commission commercial security systems*

60

UEEEC0055

Repair basic computer equipment faults by replacement of modules/sub-assemblies*

40

UEEEC0056

Repair predictable faults in audio components*

40

UEEEC0057

Repair predictable faults in general electronic apparatus*

40

UEEEC0058

Repair predictable faults in television receivers*

120

UEEEC0059

Repair routine business equipment faults*

120

UEEEC0061

Set up and adjust commercial radio frequency (RF) transmission and reception systems*

60

UEEEC0062

Set up and test residential video/audio equipment*

40

UEEEC0064

Solve oscillator problems*

40

UEEEC0065

Solve problems in basic electronic circuits*

100

UEEEC0068

Troubleshoot communication systems*

80

UEEEC0070

Troubleshoot faults in television receivers*

120

UEEEC0071

Troubleshoot fire protection systems*

40

UEEEC0072

Troubleshoot microcontroller-based hardware systems

40

UEEEC0073

Troubleshoot professional audio reproduction components*

120

UEEEC0076

Verify compliance and functionality of fire protection system installations*

60

UEEEC0077

Verify functionality and compliance of custom electronic installations*

40

UEEIC0002

Assemble, enter and verify operating instructions in microprocessor equipped devices*

20

UEEIC0004

Calibrate, adjust and test measuring instruments*

40

UEEIC0012

Develop structured programs to control external devices*

40

UEEIC0013

Develop, enter and verify discrete control programs for programmable controllers*

60

UEEIC0047

Use instrumentation drawings, specifications, standards and equipment manuals*

40

UEERL0001

Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply*

20

UEERL0002

Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.*

20

UEERL0004

Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring*

60

UEERL0005

Locate and rectify faults in low voltage (LV) electrical equipment using set procedures*

20

Qualification Mapping Information

This qualification replaces and is equivalent to UEE30911 Certificate III in Electronics and Communications

Links

Companion Volume implementation guides are found in VETNet - - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6