^

 
 

Qualification details

UEE30620 - Certificate III in Electrical Machine Repair (Release 3)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to UEE30611 - Certificate III in Electrical Machine Repair 04/Oct/2020

Release Status:
Current
Releases:
ReleaseRelease date
3 (this release) 20/Dec/2022
(View details for release 2) 23/Mar/2022
(View details for release 1) 05/Oct/2020


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnUsage RecommendationSort Table listing Units of Competency by the Usage Recommendation columnEssentialSort Table listing Units of Competency by the Essential column
UEEEL0021 - Solve problems in magnetic and electromagnetic devicesSolve problems in magnetic and electromagnetic devicesCurrentCore
UEECO0017 - Source and purchase material/parts for installation or service jobsSource and purchase material/parts for installation or service jobsCurrentElective
UEEIC0013 - Develop, enter and verify discrete control programs for programmable controllersDevelop, enter and verify discrete control programs for programmable controllersCurrentElective
UEEEL0034 - Conduct mechanical tests on electrical machines and componentsConduct mechanical tests on electrical machines and componentsCurrentElective
UEERL0001 - Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supplyAttach cords and plugs to electrical equipment for connection to a single phase 230 Volt supplyCurrentElective
UEEEL0033 - Conduct electrical tests on LV electrical machinesConduct electrical tests on LV electrical machinesCurrentCore
UEECD0043 - Solve problems in direct current circuitsSolve problems in direct current circuitsCurrentCore
UEERL0005 - Locate and rectify faults in low voltage (LV) electrical equipment using set proceduresLocate and rectify faults in low voltage (LV) electrical equipment using set proceduresCurrentElective
ICTICT214 - Operate application software packagesOperate application software packagesCurrentElective
UEEEL0055 - Overhaul and repair major switchgear and control gearOverhaul and repair major switchgear and control gearCurrentElective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 41

Classifications

SchemeCodeClassification value
ANZSCO Identifier 341111 Electrician (General) 
ASCED Qualification/Course Field of Education Identifier 0313 Electrical And Electronic Engineering And Technology 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Electrotechnology 
Taxonomy - Occupation N/A Electrical Machine Repair Tradesperson 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 341111 Electrician (General) 05/Oct/2020 
ASCED Qualification/Course Field of Education Identifier 0313 Electrical And Electronic Engineering And Technology 05/Oct/2020 
Qualification/Course Level of Education Identifier 514 Certificate III 05/Oct/2020 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 3. Updated superseded imported elective units.

Release 2. Updated superseded HLT, BSB and ICT elective units.

Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package

Qualification Description

This qualification provides competencies to overhaul and repair motor, transformer and control gear including rewinding.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

A total of 1060 weighting points  comprising:

880 core weighting points  listed below; plus

180 general elective weighting points  from the general elective units listed below.

Choose a total of 180 weighting points  elective units from the list below, of which between 0 and 60 weighting points  can be taken from Group A; and between 120 and 180 weighting points  can be taken from Group B (or all 180 elective weighting points  can be taken from Group B).

Up to 60 weighting points  of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.

Core units  

Weighting Points 

UEECD0007

Apply work health and safety regulations, codes and practices in the workplace

20

UEECD0016

Document and apply measures to control WHS risks associated with electrotechnology work*

20

UEECD0019

Fabricate, assemble and dismantle utilities industry components*

40

UEECD0020

Fix and secure electrotechnology equipment*

20

UEECD0043

Solve problems in direct current circuits*

80

UEECD0051

Use drawings, diagrams, schedules, standards, codes and specifications*

40

UEECO0022

Participate in electrical machine repair work and competency development activities

60

UEEEL0004

Carry out basic repairs to electrical components and equipment*

40

UEEEL0017

Repair and maintain mechanical components of electrical machines*

40

UEEEL0019

Solve problems in direct current (d.c.) machines*

30

UEEEL0020

Solve problems in low voltage a.c. circuits*

80

UEEEL0021

Solve problems in magnetic and electromagnetic devices*

30

UEEEL0023

Terminate cables, cords and accessories for low voltage circuits*

40

UEEEL0024

Test and connect alternating current (a.c.) rotating machines*

50

UEEEL0025

Test and connect transformers*

30

UEEEL0033

Conduct electrical tests on LV electrical machines*

40

UEEEL0056

Place and connect electrical coils*

40

UEEEL0068

Rewind three phase low voltage induction machines*

60

UEEEL0074

Wind electrical coils*

40

UEERE0001

Apply environmentally and sustainable procedures in the energy sector

20

UEERL0004

Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring*

60

Group A: Imported and common elective units 

Weighting Points 

BSBOPS203

Deliver a service to customers

20

CPCWHS1001

Prepare to work safely in the construction industry

10

HLTAID009

Provide cardiopulmonary resuscitation

10

HLTAID011

Provide First Aid

10

ICTICT214

Operate application software packages

20

UEECD0011

Comply with scheduled and preventative maintenance program processes

20

UEECD0035

Provide basic instruction in the use of electrotechnology apparatus

20

UEECO0002

Maintain documentation

20

UEECO0015

Provide quotations for installation or service jobs

20

UEECO0017

Source and purchase material/parts for installation or service jobs

20

Group B: General elective units 

Weighting Points 

UEECS0033

Use engineering applications software on personal computers

40

UEEEL0034

Conduct mechanical tests on electrical machines and components*

40

UEEEL0055

Overhaul and repair major switchgear and control gear*

60

UEEEL0066

Rewind LV direct current machines*

60

UEEEL0067

Rewind single phase machines*

40

UEEIC0013

Develop, enter and verify discrete control programs for programmable controllers*

60

UEERA0091

Service small electrical appliances and power tools*

60

UEERL0001

Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply*

20

UEERL0002

Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.*

20

UEERL0005

Locate and rectify faults in low voltage (LV) electrical equipment using set procedures*

20

Qualification Mapping Information

This qualification replaces and is equivalent to UEE30611 Certificate III in Electrical Machine Repair

Links

Companion Volume Implementation Guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6