Modification History
Release 3. Updated superseded imported elective units. Release 2. Updated superseded HLT, BSB and ICT elective units. Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package |
Qualification Description
This qualification covers competencies to select, assemble, set up and test base level fire protection systems in domestic and commercial premises. No licensing, legislative or certification requirements apply to this qualification at the time of publication. |
Entry Requirements
There are no entry requirements for this qualification |
Packaging Rules
A total of 360 weighting points comprising: 220 core weighting points listed below; plus 140 general elective weighting points from the general elective units listed below. Choose a total of 140 weighting points elective units from the list below, of which between 0 and 60 weighting points can be taken from Group A; and between 80 and 140 weighting points must be taken from Group B; or all 140 weighting points can be taken from Group B. Up to 60 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC). There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume. Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with. |
||
Core units |
Weighting Points |
|
UEECD0007 |
Apply work health and safety regulations, codes and practices in the workplace |
20 |
UEECD0016 |
Document and apply measures to control WHS risks associated with electrotechnology work* |
20 |
UEECD0019 |
Fabricate, assemble and dismantle utilities industry components* |
40 |
UEECD0020 |
Fix and secure electrotechnology equipment* |
20 |
UEECD0027 |
Participate in development and follow a personal competency development plan |
20 |
UEECD0051 |
Use drawings, diagrams, schedules, standards, codes and specifications* |
40 |
UEEEC0041 |
Install fire detection and warning system apparatus* |
40 |
UEERE0001 |
Apply environmentally and sustainable procedures in the energy sector |
20 |
Group A: Imported and common elective units |
Weighting Points |
|
BSBOPS203 |
Deliver a service to customers |
20 |
CPCWHS1001 |
Prepare to work safely in the construction industry |
10 |
HLTAID009 |
Provide cardiopulmonary resuscitation |
10 |
UEECD0035 |
Provide basic instruction in the use of electrotechnology apparatus |
20 |
UEECO0002 |
Maintain documentation |
20 |
UEECO0016 |
Receive and store materials and equipment for electrotechnology work |
20 |
UEECO0017 |
Source and purchase material/parts for installation or service jobs |
20 |
Group B: Qualification elective units |
Weighting Points |
|
ICTICT214 |
Operate application software packages |
20 |
UEECD0025 |
Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits* |
40 |
UEECD0043 |
Solve problems in direct current circuits* |
80 |
UEEDV0003 |
Install and connect cabling for direct access to telecommunications service* |
20 |
UEEEC0076 |
Verify compliance and functionality of fire protection system installations* |
60 |
UEEIC0002 |
Assemble, enter and verify operating instructions in microprocessor equipped devices* |
20 |
Qualification Mapping Information
This qualification replaces and is equivalent to UEE21011 Certificate II in Fire Alarms Servicing |
Links
Companion Volume Implementation Guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6