Release 2.  This is the second release of this unit of competency in the TLI Transport and Logistics Training Package.

Modification of assessment conditions to remove an implementation barrier.

Release 1.  This is the first release of this unit of competency in the TLI Transport and Logistics Training Package.

This unit involves the skills and knowledge required to obtain a licence to drive a light rigid vehicle. It includes systematically and efficiently controlling all vehicle functions, monitoring traffic and road conditions, managing vehicle condition and performance, and effectively managing hazardous situations.

Types of light rigid vehicles include:

• a rigid truck above 4.5 tonnes GVM but less than or equal to 8 tonnes GVM or
• a rigid bus with less than or equal to 8 tonnes GVM or seats more than 12 adults, including the driver.

Assessment of this unit will be undertaken within a licensing examination conducted by, or under the authority of, the relevant state/territory driver licensing authority.

This unit applies to driving that is carried out in accordance with relevant state/territory driver licensing authority licence requirements and regulations for light rigid vehicles.

Driving is performed with limited or minimum supervision, and with limited accountability and responsibility for self and others in achieving the prescribed outcomes.

Driving involves the application of routine vehicle driving principles and procedures to maintain safety and to operate a light rigid vehicle across a variety of driving contexts.

The primary legislative requirements applicable to this unit of competency are state/territory legislation in relation to road use and driver licensing.

This unit addresses the knowledge and skills necessary for the granting of a Light Rigid Driver Licence.

Being awarded this unit of competency is a necessary requirement to obtain a Light Rigid Driver Licence but is only one of several criteria. Prospective licence applicants should check with the state/territory driver licensing authority for other criteria (such as licence tenure and medical fitness) to confirm other eligibility requirements before undertaking training and/or assessment.

ELEMENTS 

PERFORMANCE CRITERIA 

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1 

Drive a light rigid vehicle 

1.1

Light rigid vehicle is started, steered, manoeuvred, positioned and stopped in accordance with traffic regulations, manufacturer instructions and relevant vehicle handling procedures

1.2

Engine power is managed to ensure efficiency and performance, and to minimise engine and transmission damage

1.3

Braking system of light rigid vehicle is managed and operated efficiently to ensure effective control of vehicle under all conditions

1.4

Driving hazards are identified and/or anticipated and avoided or controlled through defensive driving

1.5

Light rigid vehicle is driven in reverse, maintaining visibility and achieving accurate positioning

1.6

Light rigid vehicle is parked, shutdown and safely secured in accordance with traffic regulations

1.7

Load is safely and effectively restrained

2 

Monitor traffic and road conditions 

2.1

Traffic and road conditions are constantly monitored and acted on to enable safe operation and to ensure no injury to people or damage to property, equipment, loads and facilities

2.2

Interaction with other road users is conducted courteously in accordance with road rules to ensure safe and efficient traffic flow

3 

Monitor and maintain vehicle performance 

3.1

Vehicle performance is maintained through pre-operational inspections and vehicle checks

3.2

Appropriate signage, lights and equipment are checked for operational effectiveness and for conformity to prescribed traffic regulations

Release 2.  This is the second release of this unit of competency in the TLI Transport and Logistics Training Package.

Modification of assessment conditions to remove an implementation barrier.

Release 1.  This is the first release of this unit of competency in the TLI Transport and Logistics Training Package.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

• anticipating and monitoring traffic hazards and taking appropriate action
• applying precautions and required action to eliminate, minimise or control identified hazards
• applying relevant procedures that reflect legislative requirements
• carrying out pre-operational vehicle checks including:

• checking and topping up fluid levels
• checking:

• brakes
• operation of vehicle lights and indicators
• tyre pressures

• visually checking vehicle

• communicating effectively with others
• handling vehicle including:

• accelerating and braking
• managing engine performance
• operating vehicle controls, instruments and indicators
• positioning and stopping a vehicle
• reversing a vehicle
• starting a vehicle
• steering and manoeuvring a vehicle
• using defensive driving techniques

• negotiating a range of complex traffic infrastructure (such as roundabouts, traffic lights, stalemate intersections, railway level crossings)
• reading and interpreting relevant instructions, procedures, information and signs.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

• driving hazards and related defensive driving techniques
• efficient driving techniques
• engine power management and safe driving strategies
• light rigid vehicle controls, instruments and indicators, and their use
• light rigid vehicle handling procedures
• pre-operational checks carried out on vehicle and related action
• relevant state/territory driver licensing authority road rules, regulations, permit and licence requirements.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Practical driving aspects must be assessed in a vehicle typical of the class as approved by the state/territory driver licensing authority. The use of simulators for driver testing is not permitted.

The assessor must use the mandatory assessment tool provided by the state/territory driver licensing authority to conduct the assessment for this unit, in accordance with licensing authority requirements

The state/territory driver licensing authority may prescribe approved routes, which must be used for the final assessment.

Assessment must occur in the following traffic and road conditions:

• on open and/or private roads with moderate inclines and declines
• typical weather conditions.

and may also include traffic and road conditions at a depot, base or warehouse.

Resources for assessment include:

• a range of relevant exercises, case studies and/or simulations
• applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
• appropriate range of relevant on-road operational or workplace situations
• relevant materials, tools, equipment and personal protective equipment currently used in industry.