Release 2.  This is the second release of this unit of competency in the TLI Transport and Logistics Training Package.

• Minor changes to unit Application
• Minor changes to Assessment Conditions.

Release 1.  This is the first release of this unit of competency in the TLI Transport and Logistics Training Package.

This unit involves the skills and knowledge required to use specialised bulk gas transfer equipment.

It includes planning work, transferring gas in accordance with regulatory and operational requirements, monitoring and operating controls, and completing all operations, as required, to load and unload liquid bulk gas in accordance with the current Australian Dangerous Goods (ADG) Code and relevant state and/or territory regulations.

Work is performed under general supervision.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Not applicable.

D – Load Handling

Not applicable.

ELEMENTS 

PERFORMANCE CRITERIA 

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1 

Plan work 

1.1 

Job hazards are identified and required actions taken to minimise, control or eliminate identified hazards

1.2 

Gas transfer method is identified for loading and unloading as liquefied or gaseous state

1.3 

Precautions are undertaken to eliminate all ignition sources

1.4 

Specialised handling requirements for particular gas are identified and relevant workplace procedures are taken into account when planning work

1.5 

Traffic flow, vehicle positioning and work area conditions are assessed to ensure safe operation and no injury to people, or damage to equipment, loads or facilities

1.6 

Characteristics of gas, transfer and holding method are taken into account when evaluating procedural requirements, special precautions for method, equipment and, as required, appropriate attachments to transfer load

1.7 

Potential occurrences in work area that may affect safety and efficiency of operations are reported to appropriate personnel

1.8 

Gas transfer is planned, taking into account requirements of load, transfer method, storage facility, transport mode, load weight, volume, viscosity and equipment capacity

1.9 

Load is checked prior to and at completion of transfer to ensure ullage and/or maximum permitted capacity complies with current ADG Code

1.10 

Adjustments are made to process to accommodate special requirements such as temperature control and combustion

1.11 

Required personal protective equipment (PPE), signage, barriers and special precautions are identified in plan and utilised

1.12 

Workplace procedures to deal with leakages and ruptures are identified

2 

Transfer material 

2.1 

Equipment is prepared and appropriate attachment is fitted

2.2 

Equipment controls are checked for correct operational status before commencing transfer

2.3 

Instruments and gauges are monitored during operations to ensure operation is within manufacturer specifications, enterprise schedule and safety requirements

2.4 

Speed of operation is managed for safety and efficiency of materials movement and equipment operations

2.5 

Faults or damage to equipment are immediately reported to appropriate personnel

3 

Monitor and operate controls 

3.1 

Equipment controls are monitored and operated in accordance with manufacturer operating instructions

3.2 

Control systems are monitored in accordance with statutory authority regulations, manufacturer guidelines and site workplace procedures

3.3 

Gas is transferred ensuring no injury to personnel or damage to equipment or goods

3.4 

Faults are identified and reported in accordance with workplace procedures

4 

Complete operations 

4.1 

Equipment is shut down in accordance with manufacturer guidelines without injury to personnel or damage to equipment, loads or facilities in accordance with workplace procedures

4.2 

Clean up methods for transfer equipment are completed in accordance with workplace procedures

4.3 

Equipment is secured in accordance with workplace procedures for appropriate equipment

4.4 

Workplace documentation is completed and filed in accordance with workplace procedures

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the TLI Transport and Logistics Training Package Companion Volume Implementation Guide.

This unit replaces and is equivalent to TLID3023A Use specialised liquid bulk gas transfer equipment.

Release 2.  This is the second release of this unit of competency in the TLI Transport and Logistics Training Package.

• Minor changes to unit Application
• Minor changes to Assessment Conditions.

Release 1.  This is the first release of this unit of competency in the TLI Transport and Logistics Training Package.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all the requirements of the elements and performance criteria on at least one occasion and include:

• applying precautions and required actions to minimise, control or eliminate identified hazards
• applying relevant legislation and workplace procedures
• communicating effectively with others
• implementing contingency plans
• interpreting and following operational instructions and prioritising work
• modifying activities depending on operational contingencies, risk situations and environments
• monitoring performance of transfer equipment
• operating and adapting to differences in transfer equipment in accordance with workplace procedures
• reading and interpreting relevant instructions, workplace procedures, information and signs
• reporting and/or rectifying identified problems, faults, or malfunctions promptly in accordance with regulatory requirements and workplace procedures
• working systematically with required attention to detail without injury to self or others, or damage to product or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all the requirements of the elements and performance criteria and include knowledge of:

• current Australian Dangerous Goods (ADG) Code and relevant state/territory mass and loading regulations as they apply to vehicles transporting liquid bulk gas
• hazard management consistent with the principle of hierarchy of risk control with elimination, substitution, isolation and engineering control measures being selected before safe working practices and personal protective equipment (PPE)
• housekeeping standards and procedures
• methods of securing a vehicle following transferring liquid bulk gas
• relevant permit and licence requirements
• risks when transferring liquid bulk gas and related precautions to control the risk
• work health and safety (WHS)/occupational health and safety (OHS) procedures and guidelines for using specialised bulk transfer equipment
• workplace procedures and policies for efficiently using specialised equipment to transfer liquid bulk gas.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

• a range of relevant exercises, case studies and/or simulations
• relevant and appropriate materials, tools, equipment and PPE currently used in industry
• applicable documentation, including legislation, regulations, current ADG Code, codes of practice, workplace procedures and operation manuals.