Unit of competency

Modification History

Application

This unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure industries.

It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.

Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.

Elements and Performance Criteria

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance but not explicit in the performance criteria.

Unit Mapping Information

Supersedes and is equivalent to RIIWHS204D Working safely at heights.

Links

Companion Volume implementation guides is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272

Assessment requirements

Modification History

Performance Evidence

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

• work safely at heights on at least two occasions, including:

• accessing, interpreting and applying technical and safety information for working at heights
• assessing hazards and risks associated with working at heights and implementing control methods
• selecting, wearing and caring for personal protective equipment
• identifying required safety systems including fall protection and associated equipment
• checking the correct fitting, adjusting and anchoring of fall protection and associated equipment
• performing work safely at heights.

During the above, the candidate must:

• locate and apply relevant documentation, policies and procedures and confirm that the work activity is compliant
• implement the requirements, procedures and techniques for working safely at heights
• work effectively with others to work safely at heights in a way that meets all required outcomes
• communicate clearly and concisely with others to receive and clarify work instructions and to determine coordination requirements prior to commencing and during work activities.

Knowledge Evidence

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

• key legislation required to work safely at heights
• key policies, procedures and documentation required to work safely at heights, including:

• statutory and regulatory authority requirements

• principles and techniques for work safely at heights, including:

• heights safety systems
• safe work methods

• principles and techniques for identifying names and functions of equipment, components and materials
• principles and techniques for complying with equipment manufacturer instructions and specifications
• safe shifting and handling of tools and materials
• principles and techniques for identifying relevant hazards and emergencies
• techniques for coordinating and communicating job activities with others.

Assessment Conditions

Mandatory conditions for assessment of this unit are stipulated below. The assessment must:

• include access to:

• personal protective equipment
• equipment related to working safely at heights
• relevant documentation

• be conducted in a safe environment; and,
• be assessed in the context of this sector's work environment; and,
• be assessed in compliance with relevant legislation/regulation and using policies, procedures and processes directly related to the industry sector for which it is being assessed; and,
• confirm consistent performance can be applied in a range of relevant workplace circumstances.

Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated work environment* provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.

Assessor requirements

Assessors must be able to clearly demonstrate current and relevant industry knowledge and experience to satisfy the mandatory regulatory standards as set out in the Standards for Registered Training Organisations (RTOs) 2015/Australian Quality Training Framework mandatory requirements for assessors current at the time of assessment and any relevant licensing and certification requirements. This includes:

• vocational competencies at least to the level being delivered and assessed
• current industry skills directly relevant to the training and assessment being provided
• current knowledge and skills in vocational training and learning that informs their training and assessment
• formal relevant qualifications in training and assessment
• having knowledge of and/or experience using the latest techniques and processes
• possessing the required level of RII training product knowledge
• having an understanding and knowledge of legislation and regulations relevant to the industry and to employment and workplaces
• demonstrating the performance evidence, and knowledge evidence outlined in this unit of competency, and
• the minimum years of current** work experience after competency has been obtained as specified below in an industry sector relevant to the outcomes of the unit.

It is also acceptable for the appropriately qualified assessor to work with an industry expert to conduct assessment together and for the industry expert to be involved in the assessment judgement. The industry expert must have current industry skills directly relevant to the training and assessment being provided. This means the industry subject matter expert must demonstrate skills and knowledge from the minimum years of current work experience after competency has been obtained as specified below, including time spent in roles related to the unit being assessed:

*Guidance on simulated environments has been stipulated in the Companion Volume Implementation Guide located on VETNet.

**Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting a minimum number of site assessments as determined by the relevant industry sector, across various locations.

*** While a unit of competency does not have an AQF level, where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered as the AQF indicator level for assessment purposes.

Links

Companion Volume implementation guides is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272