Unit of competency details
RIIVEH305D - Operate and maintain a four wheel drive vehicle (Release 2)
Summary
Companion volumes:
Unit of competency
Assessment requirements
Replaced release
You are currently viewing the components related to release 2.
The current release is release 4.
View release 4 details.
Training packages that include this unit
Qualifications that include this unit
Accredited courses that have this unit in the completion mapping
Classifications
Classification history
ASCED Module/Unit of Competency Field of Education Identifier | 030515 | Automotive Vehicle Operations | 02/May/2014 | |
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form
Unit of competency
Modification History
Not applicable.
Application
This unit describes a participant’s skills and knowledge required to operate and maintain a four wheel drive vehicle in the Resources and Infrastructure Industries.
This unit is appropriate for those working in supervisory and technical specialist roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Elements and Performance Criteria
1. Identify four-wheel drive specific terms, terminology and techniques
|
1.1 Access, interpret and apply four wheel drive vehicle documentation and ensure the work activity is compliant
1.2 Identify the structural and handling differences between a conventional two wheel drive and a four-wheel drive vehicle
1.3 Identify and demonstrate the purpose and use of front wheel hubs
1.4 Identify factors affecting tyre size, fitment, rating, and pressure
1.5 Identify, recovery hooks and mounting features
1.6 Identify hazards associated with incorrect use of vehicle features or equipment
|
2. Plan for minimal environmental impact
|
2.1 Determine types of impact likely to occur during four-wheel driving activities
2.2 Demonstrate compliance with land management principles and policies when planning exploration activities
2.3 Comply with policies and management plans relevant to the activity area
2.4 Plan and conduct activities in a manner which minimises environmental impact
2.5 Adopt and implement procedures to ensure minimisation of harm to the environment from four-wheel drive activities
2.6 Demonstrate cooperation and consideration towards other land users
|
3. Perform pre-departure checks
|
3.1 Perform routine pre-departure checks under the bonnet, under the body, on external and internal items and accessories
3.2 Take action to correct any deficiency
3.3 Determine food and water requirements for journey
3.4 Select navigation equipment
3.5 Interpret weather conditions, determine suitability for driving
3.6 Apply safe vehicle loading practices
3.7 Secure items of personal luggage
3.8 Advise passengers of any special safety precautions to be taken when traversing rough terrain
|
4. Use four-wheel drive mode
|
4.1 Operate four-wheel drive both on and off road, in accordance with road rules, principles of four-wheel driving and WHS regulations
4.2 Apply smooth accelerator control strategies over a range of terrain types
4.3 Demonstrate recommended braking techniques for hard top surfaces and off road conditions
4.4 Identify situations where the engagement of four-wheel drive is required
4.5 Engage four-wheel drive mode
4.6 Survey track to identify hazards, asses risk and select a best route
4.7 Select routes to minimise damage to the environment
4.8 Use appropriate range, gear, speed, driving and braking technique, negotiate a range of terrain types whilst maintaining control of vehicle, being aware of contextual/environment issues
4.9 Maintain appropriate hand positioning on steering wheel
4.10 Check brakes and undercarriage after negotiating varying terrain
4.11 Assess and perform repairs to damaged tracks
4.12 Use standard operating procedures when travelling in company with other vehicles
|
5. Use a single snatch strap to recover a vehicle
|
5.1 Identify risks associated with vehicle recovery and develop and implement strategies to minimise risks
5.2 Identify recovery hooks
5.3 Confirm use of recommended mounting strategy on the four-wheel drive vehicle and assess use of rated recovery equipment
5.4 Demonstrate procedures for preparing vehicles for recovery
5.5 Demonstrate techniques to minimise impact on the environment during vehicle recovery
5.6 Demonstrate techniques for joining two snatch straps
5.7 Coordinate safe recovery of a four-wheel drive vehicle using a single snatch strap
5.8 Perform post recovery checks and repairs
|
6. Perform maintenance and minor repairs on four-wheel drive vehicles
|
6.1 Select/access maintenance equipment , including spares and fluids, prior to departure, considering contextual issues of the trip
6.2 Check vehicles prior to and regularly during trip, and perform routine maintenance/repair tasks
6.3 Submit vehicle written performance reports
6.4 Demonstrate safe use of a jack to support a four-wheel drive vehicle on uneven ground
|
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.
Unit Mapping Information
RIIVEH305A Operate and maintain and four wheel drive vehicle
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=ca051b1b-5101-4ec2-ac1c-49699303188d
Assessment requirements
Modification History
Not applicable.
Performance Evidence
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
- locates and applies relevant documentation, policies and procedures
- works effectively with others to undertake and complete effective operation and maintenance of a four wheel drive vehicle to meet all required outcomes including:
- preparing for and organising work activities to meet all task requirements
- communicating clearly and concisely with others to receive and clarify work instructions
- using a range of communication techniques and aids to advise others of work activity
- demonstrates the requirements, procedures and techniques for the operation and maintenance of a four wheel drive vehicle that safely, effectively and efficiently meet all of the required outcomes on a minimum of three (3) separate occasions including:
- performing pre-departure checks
- selecting and programing navigation equipment
- operating a four wheel drive vehicle on and off road
- applying correct braking techniques according to terrain
- engaging four wheel drive mode
- carrying out stop stall key start recovery procedures
- selecting routes and applying techniques to minimise damage to the environment
- identifying and using recovery equipment including:
- hooks
- single snatch straps
- identifying and applying techniques for joining two (2) snatch straps
- performing recovery of four wheel drive
- operating a jack to support a four wheel drive on unstable ground
Knowledge Evidence
The candidate must demonstrate knowledge of the following when operating and maintaining a four wheel drive vehicle through:
- apply problem solving skills to operation and maintenance of a four wheel drive vehicle
- recording, reporting and handover procedures
- technical information, including manufacturer’s manuals related to operation and maintenance of a four wheel drive vehicle
- operating vehicles within specifications and limitations
- faults in vehicles and ancillary equipment
- driving techniques and handling characteristics of four-wheel drives in different terrain
- differences between optional four-wheel drive and constant four-wheel drive vehicles and their impacts on vehicle operation and capability
- tyre management principles
- hazards associated with vehicle recovery
- travelling in convoy
- area restrictions
Assessment Conditions
- An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
- this unit must be assessed in the context of this sector’s work environment; and,
- this unit must be assessed using Resources and Infrastructure Industry sector specific policies, procedures, processes and operational manuals; and,
- assessor requirements differ between sectors as follows:
- when assessing this unit in the context of the Drilling sector:
- an assessor must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through five (5) years of work in the Industry sector; or,
- where a co-assessment or partnership arrangement exists between a qualified assessor and an Industry technical expert, the Industry technical expert can hold the unit being assessed, and/or demonstrate equivalency of skills and knowledge at the unit level. An Industry technical expert must also demonstrate a minimum of three (3) years of continuous work in the Industry sector, with the preceding one (1) year in the unit they are co-assessing; or,
- when assessing this unit in the context of the Metalliferous Mining sector:
- an assessor must demonstrate the skills and knowledge of this unit through five (5) years of current and continuous work with the Industry sector and must hold the TAE Assessor Skill Set or equivalent; or,
- when assessing this unit in the context of the Coal Mining sector:
- an assessor must demonstrate the skills and knowledge of this unit through twelve (12) month work experience in an Industry relevant to the skills being assessed within the last three (3) years; and,
- where the assessor does not have current experience a co-assessment or partnership arrangement needs to exist between the qualified assessor and an Industry technical expert/ subject matter expert. The Industry technical expert/subject matter expert must demonstrate competency in the unit being assessed, and be currently working in the sector with a minimum of twelve (12) months’ work experience within the last three (3) years; or,
- when assessing this unit in the context of the Extractive sector
- an assessor must demonstrate the skills and knowledge of this unit through five (5) years’ work experience in the Industry sector; and,
- where the assessor does not have current experience a co-assessment or partnership arrangement needs to exist between the qualified assessor and an Industry technical expert/ subject matter expert. The Industry technical expert/subject matter expert must hold the unit being assessed and be currently working in the sector with a minimum of two (2) years’ of current work experience; or,
- when assessing this unit in the context of the Civil Construction sector
- an assessor must demonstrate the skills and knowledge of this unit through five (5) years’ work experience in the Industry sector; and,
- where the assessor does not have current experience a co-assessment or partnership arrangement needs to exist between the qualified assessor and an Industry technical expert/ subject matter expert. The Industry technical expert/subject matter expert must hold the unit being assessed and be currently working in the sector with a minimum of two (2) years’ of current work experience.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=ca051b1b-5101-4ec2-ac1c-49699303188d