Unit of competency

Modification History

Application

This unit describes the skills and knowledge required to apply monitor, operate and maintain mud pits and equipment in drilling.

This unit applies to those working in operational roles. They generally perform tasks involving a broad range of skilled applications in a wide variety of contexts, which may involve some discretion and judgement in selecting equipment, services and contingency measures.

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.

Unit Sector

Drilling

Elements and Performance Criteria

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance but not explicit in the performance criteria.

Unit Mapping Information

Supersedes and is equivalent to RIIOGF301D Monitor, operate and maintain mud pits and equipment.

Links

Companion Volume implementation guides is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272

Assessment requirements

Modification History

Performance Evidence

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

• monitor, operate and maintain mud pits and equipment on at least two occasions, including:

• checking pressure relief valve (PRV) setting
• checking flow path
• charging discharge dampener with nitrogen, to correct pressure
• checking all clamps when pump is turned off
• lubricating gear end of pump and checking oil levels in gear end of pump.

During the above, the candidate must:

• locate and apply required documentation, policies and procedures
• conform to safe working practices and current legislative and operational requirements
• implement the requirements, procedures and techniques for monitoring, operating and maintaining mud pits and equipment, including:

• identifying, addressing and reporting potential hazards and risks
• carrying out emergency response
• identifying, addressing and reporting environmental issues
• preparing written records and reports
• rectifying any identified faults and malfunctions within scope of own role and escalating where required

• work with others to undertake and complete monitoring, operating and maintaining mud pits and equipment that meet required outcomes, including:

• complying with written and verbal reporting requirements and procedures
• communicating with others to receive and clarify work instructions
• communicating with others to resolve coordination requirements prior to commencing and during work activities.

Knowledge Evidence

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

• key policies, procedures and established requirements for monitoring, operating and maintaining mud pits and equipment, including those for:

• identifying and managing risks
• identifying, addressing and reporting environmental issues
• setting up work activity
• site isolation, signage and erecting barriers
• work health and safety
• selecting and checking for faults, all plant, tools and equipment to carry out tasks
• carrying out work to specifications
• applying required methods to control identified hazards
• applying technical solutions for shut down rig operations
• using mud pumps
• following emergency signals and procedures
• following safe operating procedures when operating equipment.

Assessment Conditions

Mandatory conditions for assessment of this unit are stipulated below. The assessment must:

• include access to:

• personal protective equipment
• equipment required to monitor, operate and maintain mud pits and equipment

• be conducted in a safe environment; and,
• be assessed in the context of this sector's work environment; and,
• be assessed in compliance with relevant legislation/regulation and using policies, procedures and processes directly related to the industry sector for which it is being assessed; and,
• confirm consistent performance can be applied in a range of relevant workplace circumstances.

Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated work environment* provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.

Assessor requirements

Assessors must be able to clearly demonstrate current and relevant industry knowledge and experience to satisfy the mandatory regulatory standards as set out in the Standards for Registered Training Organisations (RTOs) 2015/Australian Quality Training Framework mandatory requirements for assessors current at the time of assessment and any relevant licensing and certification requirements. This includes:

• vocational competencies at least to the level being delivered and assessed
• current industry skills directly relevant to the training and assessment being provided
• current knowledge and skills in vocational training and learning that informs their training and assessment
• formal relevant qualifications in training and assessment
• having knowledge of and/or experience using the latest techniques and processes
• possessing the required level of RII training product knowledge
• having an understanding and knowledge of legislation and regulations relevant to the industry and to employment and workplaces
• demonstrating the performance evidence, and knowledge evidence outlined in this unit of competency, and
• the minimum years of current** work experience after competency has been obtained as specified below in an industry sector relevant to the outcomes of the unit.

It is also acceptable for the appropriately qualified assessor to work with an industry expert to conduct assessment together and for the industry expert to be involved in the assessment judgement. The industry expert must have current industry skills directly relevant to the training and assessment being provided. This means the industry subject matter expert must demonstrate skills and knowledge from the minimum years of current work experience after competency has been obtained as specified below, including time spent in roles related to the unit being assessed:

*Guidance on simulated environments has been stipulated in the RII implementation guide located on VETNet.

**Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting a minimum number of site assessments as determined by the relevant industry sector, across various locations.

*** While a unit of competency does not have an AQF level, where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered as the AQF indicator level for assessment purposes.

Links

Companion Volume implementation guides is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272