Unit of competency details

RIIGOV201D - Comply with site work processes/procedures (Release 3)

Summary

Releases:
ReleaseStatusRelease date
3 (this release)Current 07/Dec/2014
(View details for release 2) Replaced26/Mar/2014
(View details for release 1) Replaced14/Nov/2013

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to RIIGOV201A - Comply with site work processes/procedures 13/Nov/2013


Training packages that include this unit

Qualifications that include this unit

CodeTitleSort Table listing Qualifications that include this unit by the Title columnRelease
RII30915 - Certificate III in Civil ConstructionCertificate III in Civil Construction 1-2 
RII30715 - Certificate III in Mine Emergency Response and RescueCertificate III in Mine Emergency Response and Rescue 1-2 
RII30713 - Certificate III in Mine Emergency Response and RescueCertificate III in Mine Emergency Response and Rescue 3-4 
RII30415 - Certificate III in Resource ProcessingCertificate III in Resource Processing 1-2 
RII30413 - Certificate III in Resource ProcessingCertificate III in Resource Processing 1-4 
RII30218 - Certificate III in Underground Coal OperationsCertificate III in Underground Coal Operations 
RII30215 - Certificate III in Underground Coal OperationsCertificate III in Underground Coal Operations 
RII30213 - Certificate III in Underground Coal OperationsCertificate III in Underground Coal Operations 1-3 
RII30115 - Certificate III in Surface Extraction OperationsCertificate III in Surface Extraction Operations 1-2 
RII30113 - Certificate III in Surface Extraction OperationsCertificate III in Surface Extraction Operations 1-4 
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 19

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 120505 Work Practices Programmes 

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 120505 Work Practices Programmes 02/May/2014 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Unit Of competency

Modification History

Release

Comment

1

This unit replaces RIIGOV201A Comply with site work processes/procedures

2

Amend Performance Evidence wording

Corrected Unit Mapping Information

Editorial corrections.

3

Required frequency and volume of evidence amended in Performance evidence.

Substantial amendments made in Assessment Conditions field, including: references to Industry Sectors, assessor and subject matter expert experience requirements, how assessment should be conducted and what it should confirm.

Application

This unit describes a participant s skills and knowledge required to Comply with site work processes/procedures in the Resources and Infrastructure Industries.

This unit is appropriate for those working in operational roles.

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.

Elements and Performance Criteria

1. Plan and prepare for work outcomes

1.1 Access, interpret and apply procedures/standards to ensure the work activity is compliant

1.2 Identify and confirm roles and responsibilities for own work

1.3 Prepare work plans that will ensure compliance with procedures and safe work outcomes

2. Apply work procedures to individual work activities

2.1 Carry out allocated work to procedures/standards

2.2 Adjust and confirm own roles and responsibilities to meet changing circumstances

2.3 Monitor work processes, report incidents and apply local risk control processes to minimise injury, loss, equipment damage and environmental harm

2.4 Identify and report noncompliance in the application of procedures and recommend improvements to relevant personnel

2.5 Complete written documentation in accordance with requirements/standards

Foundation Skills

Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.

Unit Mapping Information

RIIGOV201A Comply with site work processes/procedures

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272

 

Assessment requirements

Modification History

Release

Comment

1

This unit replaces RIIGOV201A Comply with site work processes/procedures

2

Amend Performance Evidence wording

Corrected Unit Mapping Information

Editorial corrections.

3

Required frequency and volume of evidence amended in Performance evidence.

Substantial amendments made in Assessment Conditions field, including: references to Industry Sectors, assessor and subject matter expert experience requirements, how assessment should be conducted and what it should confirm.

Performance Evidence

Evidence is required to be collected that demonstrates a candidate s competency in this unit. Evidence must be relevant to the roles within this sector s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

  • locates and applies relevant documentation, policies and procedures
  • works effectively with others to undertake and complete complying with site work processes/procedures including:
  • communicating clearly and concisely with others to receive and clarify site work processes and procedures
  • demonstrates completion of complying with site work processes and procedures that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
  • plans and completes task to achieve agreed outcomes as determined by site processes and procedures
  • adjusts performance requirements to comply with processes and procedures
  • monitors and recommends changes to overcome noncompliance with site procedures/standards
  • reports noncompliance of processes and procedures to supervisors
  • where risk is evident applies risk management processes to minimise injury and report to supervisor immediately
  • completes required site documents and reports

Knowledge Evidence

The candidate must demonstrate knowledge of the following in complying with site processes and procedure:

  • identifying, interpreting and implementing site safety and health management systems
  • performing work planning processes
  • following site and equipment safety requirements
  • determining technical and operational capability and limitations of resources and equipment being used
  • understanding relevant work health and safety legislation including obligations under duty of care

Assessment Conditions

  • An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
  • this unit is best assessed in the context of this sector s work environment;
  • where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of this sector s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills; and,
  • this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
  • assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
  • assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
  • assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
  • where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
  • assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
  • Industry sector

    AQF** Level

    Required assessor or Industry subject matter expert experience

    Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction

    1

    1 Year

    2

    2 Years

    Drilling, Coal Mining and Extractive (Quarrying)

    3-6

    3 Years

    Metalliferous Mining and Civil Construction

    3-6

    5 Years

    Other sectors

    Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation.

    *Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.

    **Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level

    Links

    Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.