Unit of competency

Modification History

Application

This unit describes the skills and knowledge required to splice and connect timber members in civil construction including installing and removing temporary supports, applying durability treatments, and completing cutting and splicing of piles or bottom chords.

It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.

Unit Sector

Civil construction

Elements and Performance Criteria

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance but not explicit in the performance criteria.

Unit Mapping Information

Supersedes and is equivalent to RIICTB306D Splice and connect timber members.

Links

Companion Volume Implementation Guide is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272

Assessment requirements

Modification History

Performance Evidence

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

• splice and connect timber members on at least two occasions, including:

• completion of cutting and splicing of at least one pile; or
• splicing of two top or bottom chords using a chainsaw and splicing plates.

During the above, the candidate must:

• locate and apply required legislation, documentation, policies and procedures
• identify, report and record hazards and risks
• work with others to splice and connect timber members that meets required outcomes, including:

• communicating with others to receive and clarify work instructions
• using communication techniques and equipment, including signage to advise others of work activity and exclusion zones.

Knowledge Evidence

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

• legislation required to splice and connect timber members
• policies, procedures and documentation required to splice and connect timber members, including those relating to:

• site and equipment safety
• hazard and risk management
• emergency response
• environmental protection
• waste management
• communication techniques and equipment
• operational, maintenance and basic diagnostic procedures
• site isolation and traffic control responsibilities
• project quality requirements
• job plans and specifications

• principles and techniques required to splice and connect timber members, including those relating to:

• temporary support member installation and removal
• connection behaviour
• shoring and jacking systems
• timber grading
• test boring
• bridge foundations
• bridge heritage
• calculation of material requirements
• interpreting engineering drawings
• face (or scarf), including:

• removing sections of timber
• changing round to flat
• using an axe, adze or chainsaw
• for acceptance of splicing plate

• durability treatments
• bracing and loading

• equipment types, characteristics, technical capabilities and limitations of plant and equipment required to splice and connect timber members, including:

• impact wrenches
• shifting spanners
• adzes
• power/air tools
• electric planes
• chainsaws
• splice plates

• materials safety data sheet (SDS) compliance processes
• components of job safety analyses (JSAs), job safety environmental analyses (JSEAs), and safe work method statements (SWMs)
• civil construction terminology related to splicing and connecting timber members

Assessment Conditions

Mandatory conditions for assessment of this unit are stipulated below. The assessment must:

• include access to:

• personal protective equipment
• equipment required to splice and connect timber members

• be conducted in a safe environment; and,
• be assessed in the context of this sector's work environment; and,
• be assessed in compliance with relevant legislation/regulation and using policies, procedures and processes directly related to the industry sector for which it is being assessed; and,
• confirm consistent performance can be applied in a range of relevant workplace circumstances.

Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated work environment* provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.

Assessor requirements 

Assessors must be able to clearly demonstrate current and relevant industry knowledge and experience to satisfy the mandatory regulatory standards as set out in the Standards for Registered Training Organisations (RTOs) 2015/Australian Quality Training Framework mandatory requirements for assessors current at the time of assessment and any relevant licensing and certification requirements. This includes:

• vocational competencies at least to the level being delivered and assessed
• current industry skills directly relevant to the training and assessment being provided
• current knowledge and skills in vocational training and learning that informs their training and assessment
• formal relevant qualifications in training and assessment
• having knowledge of and/or experience using the latest techniques and processes
• possessing the required level of RII training product knowledge
• having an understanding and knowledge of legislation and regulations relevant to the industry and to employment and workplaces
• demonstrating the performance evidence, and knowledge evidence outlined in this unit of competency, and
• the minimum years of current** work experience after competency has been obtained as specified below in an industry sector relevant to the outcomes of the unit.

It is also acceptable for the appropriately qualified assessor to work with an industry expert to conduct assessment together and for the industry expert to be involved in the assessment judgement. The industry expert must have current industry skills directly relevant to the training and assessment being provided. This means the industry subject matter expert must demonstrate skills and knowledge from the minimum years of current work experience after competency has been obtained as specified below, including time spent in roles related to the unit being assessed:

*Guidance on simulated environments has been stipulated in the RII Companion Volume Implementation Guide located on VETNet.

**Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting a minimum number of site assessments as determined by the relevant industry sector, across various locations.

*** While a unit of competency does not have an AQF level, where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered as the AQF indicator level for assessment purposes.

Links

Companion Volume Implementation Guide is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272