Unit of competency

Modification History

Application

This unit describes the skills and knowledge required to conduct concrete road paver operations in civil construction, including setting up and operating concrete road pavers across different surface and material types.

It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.

Unit Sector

Civil construction

Elements and Performance Criteria

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance but not explicit in the performance criteria.

Unit Mapping Information

Supersedes and is equivalent to RIICRC311D Conduct concrete road paver operations.

Links

Companion Volume Implementation Guide is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272

Assessment requirements

Modification History

Performance Evidence

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

• conduct concrete road paver operations on at least two occasions, including:

• completing the following tasks according to job requirements:

• three longitudinal joints of at least 100 metres to be constructed to required thickness, uniformity, line and level, on both matching and unsupported edges
• five occasions of straight paving, including one of at least 100 metres, to required thickness, uniformity, line and level, on both matching and unsupported edges
• one intersection to required thickness, uniformity, line and level, on both matching and unsupported edges

• conducting these operations using at least two different material types or surface types across the two or more occasions, including:

• no-fines concrete
• kerb and gutter
• base
• sub-base
• type F barrier
• shoulder
• continuous reinforced concrete pavement

• completing formations within specified lateral tilt values
• mixing and spreading granular materials
• spreading concrete materials
• mixing and spreading stabilised materials
• setting up concrete road paver
• operating concrete road paver and making adjustments to sensors and controls while paving
• using communication systems and hand signals according to site requirements
• clearing work area and disposing of, recycling or storing materials
• cleaning, checking, maintaining and storing plant, tools and equipment.

During the above, the candidate must:

• locate and apply required documentation, policies and procedures and confirm work activity is compliant
• implements the of requirements, procedures and techniques to conduct concrete road paver operations, including:

• identifying and applying required specifications to all work activities
• identifying, addressing and reporting potential hazards and risks
• identifying, obtaining, confirming and implementing signage requirements
• selecting and checking for faults all plant, tools and equipment required to carry out tasks
• identifying, addressing and reporting environmental issues

• work with others to conduct concrete road paver operations in a way that meets required outcomes, including:

• preparing for and organising work activities to meet task requirements
• communicating with others to receive and clarify work instructions
• using communication techniques and aids to advise others of work activity and exclusion zones
• monitoring movements and hazards and identifying and communicating changes to work environment.

Knowledge Evidence

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

• legislation required to conduct concrete road paver operations
• policies, procedures and documentation required to conduct concrete road paver operations, including those relating to:

• site requirements
• manufacturer specifications for required plant and equipment
• relevant job specifications
• hazard and risk management
• environmental protection
• work activity set up procedures
• communication techniques and aids
• site isolation, signage, erecting barriers and traffic control
• work health and safety
• waste management

• types, characteristics, technical capabilities and limitations of concrete road pavers and plant and equipment required to conduct concrete road paver operations
• types, characteristics, technical capabilities and limitations of pavements, including:

• no-fines concrete
• kerb and gutter
• base
• sub-base
• type F barrier
• shoulder
• continuous reinforced concrete pavement

• principles and techniques for effective concrete road paver operations, including:

• techniques for completing formations within specified lateral tilt values
• techniques for mixing and spreading materials, including:

• concrete materials
• stabilised materials
• granular materials
• setting up and operating concrete road pavers.

Assessment Conditions

Mandatory conditions for assessment of this unit are stipulated below. The assessment must:

• include access to:

• concrete road paver
• personal protective equipment
• equipment required to conduct concrete road paver operations

• be conducted in a safe environment; and,
• be assessed in the context of this sector's work environment; and,
• be assessed in compliance with relevant legislation/regulation and using policies, procedures and processes directly related to the industry sector for which it is being assessed; and,
• confirm consistent performance can be applied in a range of relevant workplace circumstances.

Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated work environment* provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.

• Assessor requirements 

Assessors must be able to clearly demonstrate current and relevant industry knowledge and experience to satisfy the mandatory regulatory standards as set out in the Standards for Registered Training Organisations (RTOs) 2015/Australian Quality Training Framework mandatory requirements for assessors current at the time of assessment and any relevant licensing and certification requirements. This includes:

• vocational competencies at least to the level being delivered and assessed
• current industry skills directly relevant to the training and assessment being provided
• current knowledge and skills in vocational training and learning that informs their training and assessment
• formal relevant qualifications in training and assessment
• having knowledge of and/or experience using the latest techniques and processes
• possessing the required level of RII training product knowledge
• having an understanding and knowledge of legislation and regulations relevant to the industry and to employment and workplaces
• demonstrating the performance evidence, and knowledge evidence outlined in this unit of competency, and
• the minimum years of current** work experience after competency has been obtained as specified below in an industry sector relevant to the outcomes of the unit.

It is also acceptable for the appropriately qualified assessor to work with an industry expert to conduct assessment together and for the industry expert to be involved in the assessment judgement. The industry expert must have current industry skills directly relevant to the training and assessment being provided. This means the industry subject matter expert must demonstrate skills and knowledge from the minimum years of current work experience after competency has been obtained as specified below, including time spent in roles related to the unit being assessed:

*Guidance on simulated environments has been stipulated in the Companion Volume Implementation Guide located on VETNet.

**Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting a minimum number of site assessments as determined by the relevant industry sector, across various locations.

*** While a unit of competency does not have an AQF level, where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered as the AQF indicator level for assessment purposes.

Links

Companion Volume Implementation Guide is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272