Unit of competency details

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

ELEMENT 

PERFORMANCE CRITERIA 

1. Plan and prepare

1.1. Access, interpret and apply compliance documentation  relevant to the work activity

1.2. Obtain, confirm and apply work instructions, including plans, specifications, quality requirements and operational details to the allotted task

1.3. Obtain and confirm safety requirements  from the site  safety plan and organisational policies and procedures, and apply to the allotted task

1.4. Identify, obtain and implement signage requirements  from the project traffic  management plan

1.5. Select plant , tools and equipment  to carry out tasks consistent with the requirements of the job, check for serviceability and rectify or report any faults

1.6. Identify environmental protection requirements  from the project environmental management plan, and confirm and apply to the allotted task

2. Confirm installation details

2.1. Measure stirrup spacing and compare with spacing of cast in ligatures and brackets to eliminate difficulties when positioning units

2.2. Determine individual pre-cast parapet  unit location from project drawings and specifications

2.3. Determine sequence of parapet installation  and carry out in accordance with workplace procedures

2.4. Check parapets for conformity to design prior to lifting 

2.5. Check lifting points on pre-cast units for serviceability

3. Install pre-cast parapet units

3.1. Raise pre-cast parapet end unit to allow fitting  of bracket

3.2. Manoeuvre pre-cast parapet unit into the vertical position in accordance with installation procedures

3.3. Guide pre-cast parapet unit into approximate position and attach locating bolts to cast in brackets

3.4. Correctly establish vertical and horizontal alignment of pre-cast parapet end units and tighten bolts

3.5. Install intermediate pre-cast parapet units in approximate positions

3.6. Check pre-cast end units for correct height and alignment

3.7. Adjust intermediate pre-cast parapet units to design alignment and tighten locating bolts

3.8. Install anchor cable and fix ends to job specifications

4. Finish parapet

4.1. Install services  and fittings to job specifications as required

4.2. Fit joints with foam inserts and groat

4.3. Form up and prepare cast in-situ infills of the pre-cast units

4.4. Place concrete and finish to design

4.5. Dismantle formwork and remove from site

5. Clean up

5.1. Clear work area and dispose of or recycle materials  in accordance with project environmental management plan

5.2. Clean, check, maintain and store plant, tools and equipment

This section describes the skills and knowledge required for this unit.

Required skills 

Specific skills are required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes the ability to carry out the following, as required to install pre-cast parapets:

• apply legislative, organisation and site requirements and procedures for installing pre-cast parapets
• organise work activities
• select and use relevant tools and equipment safely
• identify and report on hazards related to the worksite and work activity
• communicate effectively to receive and clarify work instructions

Required knowledge 

Specific knowledge is required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes knowledge of the following, as required to install pre-cast parapets:

• site and equipment safety requirements
• bridge construction and sequencing
• pre-cast concrete parapets and installation
• bridge barriers
• concrete and concreting
• service installation
• safe lifting techniques
• safe working procedures for working at heights and over water
• processes for interpreting engineering drawings
• equipment types, characteristics, technical capabilities and limitations
• site isolation and traffic control responsibilities and authorities
• materials safety data sheets and materials handling methods
• project quality requirements
• civil construction terminology
• JSAs/safe work method statements

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:

• knowledge of the requirements, procedures and instructions for installing pre-cast parapets
• implementation of requirements, procedures and techniques for the safe, effective and efficient completion of pre-cast parapet installation
• working with others to undertake and complete the installation of pre-cast parapets that meets all of the required outcomes
• consistent timely completion of pre-cast parapet installation that safely, effectively and efficiently meets the required outcomes
• position, fix and finish the pre-cast parapet units, including the installation of end units, services and fittings for a multi-span bridge with a minimum length of twenty metres to specifications

Context of and specific resources for assessment 

• This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.
• Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.
• The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.
• Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.
• Aboriginal people and other people from a non English speaking background may have second language issues.
• Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.

Method of assessment 

This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:

• written and/or oral assessment of the candidate's required knowledge
• observed, documented and/or first hand testimonial evidence of the candidate's:

• implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes
• consistent achievement of required outcomes

• first hand testimonial evidence of the candidate's:

• working with others to undertake and complete the installation of pre-cast parapets

Guidance information for assessment 

Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Relevant compliance documentation  may include:

• legislative, organisational and site requirements and procedures
• manufacturer's guidelines and specifications
• Australian standards
• Employment and workplace relations legislation
• Equal Employment Opportunity and Disability Discrimination legislation

Safety requirements  may include:

• OHS requirements in accordance with State or Territory legislation and regulations, organisational safety policies and procedures, and project safety plan, including protective clothing and equipment, use of tools and equipment, workplace environment and safety, handling of materials, use of fire fighting equipment, use of First Aid equipment, hazard control and hazardous materials and substances
• safe parking practices including ensuring access ways are clear, equipment/machinery is away from overhangs and refuelling sites, safe distance are kept from excavations, and areas secured from unauthorised access or movement
• safe operating procedures including recognising and preventing hazards associated with uneven/unstable terrain, trees, pits, poles, trip hazards, dirt mounds, overhead service lines, bridges, surrounding buildings, obstructions, structures, facilities, dangerous materials, recently filled trenches, other machines, personnel, traffic control, working in proximity to others, worksite visitors and the public
• recognising hazards and risks including uneven/unstable terrain, trees, fires, overhead and underground services, bridges, buildings, excavations, traffic, embankments, cuttings, structures and hazardous materials
• emergency procedures related to equipment operation including emergency shutdown and stopping, extinguishing equipment fires, organisational First Aid requirements and evacuation

Site  may include:

• any rural or urban bridge construction project

Signage requirements  may include:

• site safety signage
• temporary signage for the benefit of motorists and pedestrians
• barricades
• traffic conditions signage

Traffic  may include:

• congested urban environments
• low traffic rural areas
• off-road un-trafficked areas
• buildings
• parking sites
• pedestrian areas

Tools and equipment  may include:

• fall arrestors
• tag lines
• drifts
• spanners
• pneumatic wrenches and drills
• compressors and hoses
• tape measures
• marking equipment
• ladders
• winches
• lifting equipment
• trowels
• slings
• cranes
• scaffolding

Environmental protection requirements  may include:

• organisational/project environmental management plan
• waste management
• water quality protection
• noise
• vibration
• dust and clean-up management

Parapet  may include:

• those secured with locating bolts and anchor cables

Installation  of parapets may include:

• lifting and placing parapets
• connecting end units
• fitting and grouting joints
• casting in-situ infills
• installing services and fittings

Lifting  with cranes may include lifting over:

• water
• land

Fitting  may include:

• lights
• phones
• bridge rail
• signs
• delineators

Services  may include:

• power
• telecommunications

Materials  may include:

• pre-cast parapets
• locating bolts
• 'U' brackets
• end units
• anchor cables
• foam inserts
• grout
• concrete