Modification History
Release |
Comments |
|
1 |
Replaces RII50509 Diploma of Civil Construction Design. |
|
2 |
Packaging rules amended to comply with Standards for Training Packages. |
|
3 |
Corrected modification history. |
Qualification Description
The Diploma of Civil Construction Design reflects the role of personnel working as designers or design para-professionals who support professional engineers. They perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment/roles/techniques for themselves and others. They are required to develop site specific work designs to ensure the implementation of the client’s site requirements. They demonstrate the application of a broad range of technical, managerial, coordination and planning skills.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
Requirements for completion of the qualification
The following table provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Successful completion of twenty (20) units made up of:
- at least four (4) must be chosen from group A
- at least two (2) must be chosen from group B
- at least four (4) must be chosen from group C
- at least four (4) must be chosen from group D
- up to three (3) units may be chosen from Certificate IV, Diploma or Advanced Diploma level from this or any other Training Package or accredited course
Units chosen must be relevant to the job function.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
Note: The units chosen to satisfy the Diploma of Civil Construction Design must be additional to the units achieved to satisfy the Certificate IV in Civil Construction Design.
|
Group A |
|
|
Unit code |
Unit title |
|
BSBCUS501A |
Manage quality customer service |
|
BSBINM501A |
Manage an information or knowledge management system |
|
BSBMGT608B |
Manage innovation and continuous improvement |
|
BSBPMG512A |
Manage project time |
|
BSBPMG513A |
Manage project quality |
|
BSBPMG517A |
Manage project risk |
|
BSBPMG518A |
Manage project procurement |
|
BSBWOR501B |
Manage personal work priorities and professional development |
|
BSBWOR502B |
Ensure team effectiveness |
Group B |
|
|
Unit code |
Unit title |
|
MEM09011B |
Apply basic engineering design concepts |
|
MEM30001A |
Use computer aided drafting systems to produce basic engineering drawings |
|
MEM30002A |
Produce basic engineering graphics |
|
MEM30003A |
Produce engineering drawings |
|
MEM30004A |
Use CAD to create and display 3D models |
Group C |
|
|
Unit code |
Unit title |
|
RIICWD501D |
Prepare detailed design of foundations |
|
RIICWD502D |
Prepare detailed design of lighting |
|
RIICWD504D |
Prepare detailed design of environmental controls |
|
RIICWD505D |
Prepare detailed design of landscaping |
|
RIICWD506D |
Prepare detailed design of canals |
|
RIICWD507D |
Prepare detailed geotechnical design |
|
RIICWD508D |
Prepare detailed design of rural roads |
|
RIICWD509D |
Prepare detailed design of urban roads |
|
RIICWD510D |
Prepare detailed design of busways |
|
RIICWD511D |
Prepare detailed design of sub-divisions |
|
RIICWD512D |
Prepare detailed design of motorways and interchanges |
|
RIICWD513D |
Prepare detailed design of rail civil infrastructure |
|
RIICWD514D |
Prepare detailed design of dams |
|
RIICWD515D |
Prepare detailed design of airfield civil works |
|
RIICWD516D |
Prepare detailed design of bicycle ways |
|
RIICWD517D |
Prepare detailed design of industrial hardstands |
|
RIICWD518D |
Prepare detailed design of open car parks |
|
RIICWD519D |
Prepare detailed design of inter modal facilities civil works |
|
RIICWD520D |
Prepare detailed design of rigid pavements |
|
RIICWD521D |
Prepare detailed design of flexible pavements |
|
RIICWD522D |
Prepare stabilised material mix design |
|
RIICWD523D |
Prepare asphalt mix design |
|
RIICWD524D |
Prepare design of spray seal surfacing |
|
RIICWD525D |
Select pavement surfacing |
|
RIICWD526D |
Prepare detailed traffic analysis |
|
RIICWD527D |
Prepare detailed design of traffic signals |
|
RIICWD528D |
Prepare detailed design of traffic management systems |
|
RIICWD529D |
Prepare detailed design of underground services |
|
RIICWD530D |
Prepare detailed design of surface drainage |
|
RIICWD531D |
Prepare detailed design of subsurface drainage |
|
RIICWD532D |
Prepare detailed design of tunnels |
|
RIICWD533D |
Prepare detailed design of civil concrete structures |
|
RIICWD534D |
Prepare detailed design of civil steel structures |
|
RIICWD535D |
Prepare detailed design of civil timber structures |
|
RIICWD536D |
Prepare detailed design of civil masonry, crib and gabion structures |
|
RIICWD537D |
Prepare detailed design of marine structures civil works |
Group D |
|
|
Unit code |
Unit title |
|
MSL925001A |
Analyse data and report results
|
|
MSL975007A |
Supervise earthworks inspection, sampling and testing operations
|
|
MSL975016A |
Perform complex tests to measure engineering properties of materials |
|
CPPSIS5032A |
Capture new spatial data |
|
CPPSIS5035A |
Obtain and validate existing spatial data |
|
CPPSIS5036A |
Integrate spatial datasets |
|
RIICBS401D |
Apply the principles for the asphalt paving and compaction |
|
RIICBS402D |
Apply the principles for the application of bituminous sprayed treatment |
|
RIICBS403D |
Apply the principles for the application of polymer modified binder |
|
RIICBS404D |
Apply the principles for the selection and use of bituminous emulsion |
|
RIICBS405D |
Apply the principles for the application of slurry surfacing |
|
RIICBS406D |
Apply the principles of pavement profiling using a profiler |
|
RIICBS407D |
Apply the principles for the manufacture and delivery of hot mix asphalt |
|
RIICBS408D |
Apply the principles for the manufacture of cold mix |
|
RIICBS409D |
Apply the principles for the manufacture of polymer modified binders |
|
RIICBS410D |
Apply the principles for the manufacture of bituminous emulsion |
|
RIICBS411D |
Apply the principles for the manufacture of slurry surfacing |
|
RIICPL401D |
Apply the principles for the installation of underground service using open excavation |
|
RIICRC401D |
Apply the principles of flexible pavement construction |
|
RIICRC402D |
Apply the principles of rigid pavement construction |
|
RIICRC403D |
Apply the principles of the stabilisation of materials |
|
RIICRC404D |
Inspect and report on pavement condition |
|
RIICSG401D |
Apply the principles of civil concrete structures construction |
|
RIICSG402D |
Apply the principles of civil steel structures construction |
|
RIICSG403D |
Apply the principles of civil timber structures construction |
|
RIICSG404D |
Apply the principles of civil masonry, crib and gabion structure construction |
|
RIICTC401D |
Apply the principles of tunnel construction |
|
RIICTT401D |
Apply the principles for the installation of underground services using trenchless technology |
|
RIICTT402D |
Apply the principles for the repair and rehabilitation of underground services using trenchless technology |
|
RIIMEX403D |
Apply the principles of canal construction |
|
RIIMPO402D |
Apply the principles of earthworks construction |
Qualification Mapping Information
No equivalent qualification
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272
