Modification History
Release |
Comments |
1 |
This qualification replaces RII31613 Certificate III in Trenchless Technology. Elective groups and packaging rules amended. RIICPL301D Install water mains pipelines, RIICPL302D Install stormwater systems, RIICPL303D Install sewer pipelines and RIICPL304D Install pre-cast gully pits added to elective Group A. BSBDIV301 added to elective Group B. Updated codes of imported units. Added qualification mapping information. |
2 |
This version was released with RII Resources and Infrastructure Training Package version 3.0. |
Qualification Description
This qualification reflects the role of a skilled operator working in trenchless technology in the Civil construction industry, who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge. The individual may provide theoretical advice and support a team.
Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Total number of units = 26
18 core units plus
8 elective units, of which:
- at least four (4) must be chosen from Group A, of which at least one (1) must be a trenchless technology (RIICTT) unit
- at least one (1) must be chosen from Group B
- no more than three (3) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
All elective units selected for this qualification must reflect current occupational and learning outcomes of this AQF qualification level.
There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
Core units of competency |
|
Unit code |
Unit title |
RIIBEF201D |
Plan and organise work |
RIICCM201D |
Carry out measurements and calculations |
RIICCM202D |
Identify, locate and protect underground services |
RIICCM203D |
Read and interpret plans and specifications |
RIICCM205E |
Carry out manual excavation |
RIICCM206D |
Support plant operations |
RIICCM207D |
Spread and compact materials manually |
RIICCM208D |
Carry out basic levelling |
RIICCM210D |
Install trench support |
RIICOM201D |
Communicate in the workplace |
RIICRC203D |
Install sub-soil drainage |
RIIRIS201D |
Conduct local risk control |
RIISAM201D |
Handle resources and infrastructure materials and safely dispose of nontoxic materials |
RIISAM203D |
Use hand and power tools |
RIISAM204D |
Operate small plant and equipment |
RIIWHS201D |
Work safely and follow WHS policies and procedures |
RIIWMG203D |
Drain and dewater civil construction site |
RIIWMG301D |
Control construction site water table |
Electives |
|
Group A |
|
Unit code |
Unit title |
NWPNET016 |
Inspect sewer or stormwater line |
NWPNET017 |
Supervise and report on conduit inspections |
RIICPL301D |
Install water mains pipelines |
RIICPL302D |
Install stormwater systems |
RIICPL303D |
Install sewer pipelines |
RIICPL304D |
Install pre-cast gully pits |
RIICTT301D |
Conduct fluid assisted directional boring |
RIICTT302D |
Conduct impact moling, ramming and augering |
RIICTT303D |
Control micro tunnelling and pipe-jacking |
RIICTT304D |
Undertake on-line replacement for existing pipeline systems |
RIICTT305D |
Undertake localised repair and sealing of existing pipeline systems |
RIICTT306D |
Install cure in-place linings for existing pipeline systems |
RIICTT307D |
Spray linings for existing pipeline systems |
RIICTT308D |
Install close-fit linings for existing pipeline systems |
RIICTT309D |
Install slip lining in existing pipeline systems |
RIICTT310D |
Renovate large diameter pipes and chambers |
RIIHAN301E |
Operate elevating work platform |
RIIHAN307E |
Operate a vehicle loading crane |
RIIIMG301D |
Maintain site records |
RIIOGF302D |
Operate drilling fluids and mud pits |
RIIOGN303D |
Operate mud systems |
Group B |
|
Unit code |
Unit title |
BSBDIV301 |
Work effectively with diversity |
CPCCLDG3001A |
Licence to perform dogging |
CPCCLSF2001A |
Licence to erect, alter and dismantle scaffolding basic level |
RIICCM209D |
Carry out concrete work |
RIICRC208D |
Lay pipes |
RIIHAN208D |
Perform dogging |
RIIHAN211D |
Conduct basic scaffolding operations |
RIIRIS202D |
Responding to site based spills |
RIISAM205D |
Cut, weld and bend materials |
RIIWHS202D |
Enter and work in confined spaces |
RIIWHS205D |
Control traffic with stop-slow bat |
TLILIC0002 |
Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) |
TLILIC0005 |
Licence to operate a boom-type elevating work platform (boom length 11 metres or more) |
Qualification Mapping Information
Code and titlecurrent version |
Code and titleprevious version |
Comments |
Equivalence status |
RII31615 Certificate III in Trenchless Technology |
RII31613 Certificate III in Trenchless Technology |
Elective groups and packaging rules amended but outcomes are unchanged |
Equivalent qualification |
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272