Modification History
Not applicable.
Qualification Description
This qualification reflects the role of a skilled operator working in trenchless technology in the civil construction industry, who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge. The individual may provide theoretical advice and support a team.
Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
Requirements for completion of the qualification
The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Successful completion of twenty six (26) units of competency made up of:
- eighteen (18) core units, and
- eight (8) elective units of which:
- at least five (5) must be chosen from group A and/or group B, including:
- at least four (4) at Certificate III level
- at least one (1) must be a trenchless technology (RIICTT) unit
- up to three (3) units may be chosen from Certificate II, Certificate III or Certificate IV level from this, or any other Training Package or accredited course
Units chosen must be relevant to the job function.
There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
Core units of competency |
|
Unit code |
Unit title |
RIIBEF201D |
Plan and organise work |
RIICCM201D |
Carry out measurements and calculations |
RIICCM202D |
Identify, locate and protect underground services |
RIICCM203D |
Read and interpret plans and specifications |
RIICCM205D |
Carry out manual excavation |
RIICCM206D |
Support plant operations |
RIICCM207D |
Spread and compact materials manually |
RIICCM208D |
Carry out basic levelling |
RIICCM210D |
Install trench support |
RIICOM201D |
Communicate in the workplace |
RIICRC203D |
Install sub-soil drainage |
RIIWHS201D |
Work safely and follow WHS policies and procedures |
RIIRIS201D |
Conduct local risk control |
RIISAM201D |
Handle resources and infrastructure materials and safely dispose of nontoxic materials |
RIISAM203D |
Use hand and power tools |
RIISAM204D |
Operate small plant and equipment |
RIIWMG203D |
Drain and dewater civil construction site |
RIIWMG301D |
Control construction site water table |
Electives |
|
Group A |
|
Unit code |
Unit title |
NWP331B |
Inspect conduit and report on condition and features |
NWP440A |
Supervise conduit inspection and reporting |
RIICCM209D |
Carry out concrete work |
RIICRC208D |
Lay pipes |
RIICTT301D |
Conduct fluid assisted directional boring |
RIICTT302D |
Conduct impact moling, ramming and augering |
RIICTT303D |
Control micro tunnelling and pipe-jacking |
RIICTT304D |
Undertake on-line replacement for existing pipeline systems |
RIICTT305D |
Undertake localised repair and sealing of existing pipeline systems |
RIICTT306D |
Install cure in-place linings for existing pipeline systems |
RIICTT307D |
Spray linings for existing pipeline systems |
RIICTT308D |
Install close-fit linings for existing pipeline systems |
RIICTT309D |
Install slip lining in existing pipeline systems |
RIICTT310D |
Renovate large diameter pipes and chambers |
RIIHAN208D |
Perform dogging |
RIIHAN211D |
Conduct basic scaffolding operations |
RIIHAN301D |
Operate elevating work platform |
RIIHAN307D |
Operate a vehicle loading crane |
RIIIMG301D |
Maintain site records |
RIIOGF302D |
Operate drilling fluids and mud pits |
RIIOGN303D |
Operate mud systems |
RIIRIS202D |
Responding to site based spills |
RIIWHS202D |
Enter and work in confined spaces |
RIIWHS205D |
Control traffic with stop-slow bat |
RIISAM205D |
Cut, weld and bend materials |
Group B |
|
Unit code |
Unit title |
CPCCLDG3001A |
Licence to perform dogging |
CPCCLSF2001A |
Licence to erect, alter and dismantle scaffolding basic level |
TLILIC0012A |
Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) |
TLILIC2005A |
Licence to operate a boom-type elevating work platform (boom length 11 meters or more) |
Qualification Mapping Information
No equivalent qualification
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272