Modification History
Release |
Comments |
|
1 |
Packaging rules amended to comply with Standards for Training Packages. |
|
2 |
Unit code for 'Conduct integrated tool carrier operations' changed from RIIHAN303D to correct code RIIHAN311D. |
|
3 |
RIIHAN311D added to unit grid. |
Qualification Description
This qualification reflects the role of employees such as production operators in an underground metalliferous mine, who perform tasks involving a broad range of skilled applications in a varied work context, using some discretion and judgement in selecting equipment, services or contingency measures.
Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
Requirements for completion of the qualification
The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Successful completion of fourteen (14) units of competency made up of:
- six (6) core units, and
- eight (8) elective units of which:
- at least five (5) must be chosen from group A
- up to three (3) may be chosen from group B and/or group C
- up to two (2) unit may come from Certificate II, Certificate III or Certificate IV level from this, or any other Training Package or accredited course
Units chosen must be relevant to the job function.
There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.
There are prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
A prerequisite must be considered in the total number of units chosen.
|
Core units of competency |
|
|
Unit code |
Unit title |
|
RIIWHS201D |
Work safely and follow WHS policies and procedures |
|
RIIENV302D |
Apply environmentally sustainable work practices |
|
RIICOM302D |
Communicate workplace information |
|
RIIMEX302D |
Assess ground conditions |
|
RIIQUA201D |
Maintain and monitor site quality standards |
|
RIIRIS301D |
Apply risk management processes |
Electives |
|
Group A |
|
|
Unit code |
Unit title |
|
BSBFLM305C |
Support operational plan |
|
RIIBEF301D |
Run on-site operations |
|
RIIBEF401D |
Manage non-routine, complex technical situations |
|
RIIBHD302D |
Conduct underground development drilling |
|
RIIBHD303D |
Conduct long hole drilling |
|
RIIBLA303D |
Conduct underground development shotfiring |
|
RIIBLA304D |
Conduct underground production shotfiring |
|
RIIBLA305D |
Conduct secondary blasting |
|
RIIMPG301D |
Control and monitor automated plant/machinery |
|
RIIMPO307D |
Conduct wheel grader operations in underground mines |
|
RIIMPO333D |
Conduct underground load, hal and dump truck operations |
|
RIINHB307D |
Conduct conventional core drilling |
|
RIINHB310D |
Conduct surface directional drilling |
|
RIINHB312D |
Conduct raise boring |
|
RIIWHS301D |
Conduct safety and health investigation |
|
RIISAM202D |
Isolate and access plant |
|
RIISAM306D |
Service and maintain conveyors, feeders and hoppers |
|
RIISAM307D |
Service and maintain crushers |
|
RIISAM312D |
Inspect and maintain shafts and structures |
|
RIISRM302D |
Conduct stockpile reclaiming operations |
|
RIIUMM301D |
Conduct wet filling activities |
|
RIIUMM302D |
Install sets |
|
RIIUMM303D |
Conduct hand held mining |
|
RIIUMM304D |
Construct and maintain underground roads |
|
RIIUMM305D |
Install and remove a secondary fan |
|
RIIUMM306D |
Conduct mechanical scaling |
|
RIIUMM307D |
Maintain underground stockpiles |
|
RIIUND205D |
Respond to a workforce incident |
|
RIIUND301D |
Operate manual winder |
|
RIIUND302D |
Conduct cage operations |
|
RIIUND303D |
Operate winder for shaft sinking |
|
RIIUND304D |
Recover equipment |
|
RIIUND305D |
Recover underground equipment |
|
RIIUND306D |
Conduct line of sight remote operations |
|
RIIUND307D |
Conduct tele-remote operations |
|
RIIUND308D |
Conduct control room operations |
|
RIIUND309D |
Conduct mechanical underground ground support drilling and installation |
|
RIIVEH306D |
Operate mine service vehicle |
Group B |
|
|
Unit code |
Unit title |
|
BSBINN301A |
Promote innovation in a team environment |
|
MSAPMPER300C |
Issue work permits
|
|
RIIBEF302D |
Monitor site production activities |
|
RIIBLA306D |
Conduct accretion firing |
|
RIIERR203D |
Escape from hazardous situation unaided |
|
RIIERR204D |
Provide aided rescue to endangered personnel |
|
RIIERR302D |
Respond to local emergencies and incidents |
|
RIIHAN304D |
Conduct slewing crane operations |
|
RIIHAN306D |
Carry out lifting using multiple cranes |
|
RIIHAN309D |
Conduct telescopic materials handler operations |
|
RIIHAN310D |
Conduct crane operations underground |
|
RIIHAN311D |
Conduct integrated tool carrier operations |
|
RIIMPO334D |
Conduct operations using skid steer loader with attachments |
|
RIIMPO335D |
Conduct operations using skid steer loader without attachments |
|
RIIRIS202D |
Respond to site based spills |
|
RIISAM311D |
Maintain winder equipment |
|
RIISAM313D |
Monitor, inspect and service ropes and attachments |
|
RIISTD301D |
Take environmental samples and measurements |
|
RIIUND310D |
Apply shot-crete underground |
|
RIIVEH301D |
Conduct rail haulage operations |
Group C |
|
|
Unit code |
Unit title |
|
TLILIC3008A |
Licence to operate a slewing mobile crane (up to 20 tonnes) |
Qualification Mapping Information
No equivalent qualification
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272
