Modification History
|
Release |
Comments |
|
Release 1 |
This version first released with RII Resources and Infrastructure Industry Training Package Version 7.0. |
Qualification Description
This qualification reflects the role of individuals working as entry-level operators in open cut coal or metalliferous mines or quarries, who perform a prescribed range of tasks involving known routines and procedures, and take some responsibility for the quality of work outcomes.
Licensing, legislative, regulatory or certification considerations
Licensing, legislative and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the qualification.
Entry Requirements
Nil
Packaging Rules
The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Total number of units = 9
4 core units plus
5 elective units, of which:
- at least 1 must be from Group A
- at least 2 must be from Group B
- no more than 2 may be from Group C
- no more than 2 may be from elsewhere in this or any other currently endorsed training package, or from an accredited course.
Elective units must be relevant to the work environment and the qualification, maintain the overall integrity of the AQF alignment, not duplicate the outcome of another unit chosen for the qualification, and contribute to a valid industry-supported vocational outcome.
The elective bank contains both licensed and non-licensed units of competency relating to high risk work in the resources and infrastructure industry. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
|
Core units of competency |
|
|
Unit code |
Unit title |
|
BSBSUS211 |
Participate in sustainable work practices |
|
RIICOM201E |
Communicate in the workplace |
|
RIIRIS201E |
Conduct local risk control |
|
RIIWHS201E |
Work safely and follow WHS policies and procedures |
Electives |
|
Group A |
|
|
Unit code |
Unit title |
|
RIIGOV201E |
Comply with site work processes/procedures |
|
RIIQUA201E |
Maintain and monitor site quality standards |
Group B |
|
|
Unit code |
Unit title |
|
RIIBLA203E |
Conduct mobile mixing of explosives |
|
RIIERR205D |
Apply initial response first aid |
|
RIIERR302E |
Respond to local emergencies and incidents |
|
RIIMEX201E |
Suppress dust in open-cut environments |
|
RIIMEX203D |
Break oversize rock |
|
RIIMEX204D |
Conduct workboat/barge operations |
|
RIIMPO205E |
Operate roller/compactor |
|
RIIMPO206D |
Conduct bulk water truck operations |
|
RIIMPO208F |
Operate support equipment |
|
RIIMPO338E |
Conduct rigid haul truck operations |
|
RIIPEO201E |
Conduct conveyor operations |
|
RIIPEO202E |
Provide deck support for conveyor-car high wall mining operations |
|
RIIPEO203D |
Conduct stacker operations |
|
RIIPEO206D |
Lay and recover cables and hoses |
|
RIIPRO201D |
Conduct crushing operations |
|
RIIPRO202D |
Conduct screening and conveying operations |
|
RIIPRO203D |
Operate programmable logic control systems |
|
RIIPRO205D |
Conduct blending plant operations |
|
RIISAM202E |
Isolate and access plant |
|
RIISAM212E |
Service mine plant and equipment |
|
RIIVEH201E |
Operate a light vehicle |
|
RIIVEH305F |
Operate and maintain a four wheel drive vehicle |
|
RIIWMG201D |
Conduct dewatering activities in surface operations |
Group C |
|
|
Unit code |
Unit title |
|
AHCNAR201 |
Carry out natural area restoration works |
|
AHCNAR303 |
Implement revegetation works |
|
AHCSAW201 |
Conduct erosion and sediment control activities |
|
AHCSAW301 |
Construct conservation earthworks |
|
BSBTEC101 |
Operate digital devices |
|
BSBTWK301 |
Use inclusive work practices |
|
CPCCLSF2001A |
Licence to erect, alter and dismantle scaffolding basic level |
|
RIICCM208D |
Carry out basic levelling |
|
RIIENV201E |
Identify and assess environmental and heritage concerns |
|
RIIHAN201E |
Operate a forklift |
|
RIIHAN203E |
Conduct lifting operations |
|
RIIHAN206E |
Transport plant, equipment and personnel |
|
RIIHAN208E |
Perform dogging |
|
RIIHAN209E |
Perform basic rigging |
|
RIIHAN210D |
Perform intermediate rigging operations |
|
RIIHAN211D |
Conduct basic scaffolding operations |
|
RIIHAN212E |
Conduct non-slewing crane operations |
|
RIIRIS202E |
Respond to site based spills |
|
RIISAM205E |
Cut, weld and bend materials |
|
RIISAM207E |
Apply operational maintenance skills |
|
RIISAM208E |
Perform plant operational maintenance |
|
RIISAM213E |
Position and set up mobile lighting |
|
RIISTD202D |
Collect routine site samples |
|
RIIVEH202F |
Operate a medium vehicle |
|
RIIWHS202E |
Enter and work in confined spaces |
|
RIIWHS204E |
Work safely at heights |
|
TLID2022 |
Conduct weighbridge operations |
Qualification Mapping Information
Supersedes and is equivalent to RII20215 Certificate II in Surface Extraction Operations.
Links
Companion Volume Implementation Guide is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272
