Modification History
Release |
Comment |
1 |
This qualification replaces RII20209 Certificate II in Surface Extraction Operations. |
2 |
Removed Mandatory Unit information from Packaging Rules. |
3 |
Added RIIVEH305D Operate and maintain a four wheel drive vehicle to Group C electives. |
Qualification Description
This qualification reflects the role of individuals working as an operator on sites such as an open cut coal mine, a quarry or an open cut metalliferous mine, undertaking a prescribed range of tasks involving known routines and procedures, and taking some responsibility for the quality of work outcomes.
Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.
Entry Requirements
There are no entry requirement for this Qualification.
Packaging Rules
Requirements for completion of the qualification
The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Successful completion of nine (9) units of competency made up of:
- four (4) core units, and
- five (5) elective units of which:
- one (1) must be chosen from group A
- at least two (2) must be chosen from the group B
- up to two (2) may be chosen from group C
- up to two (2) may be chosen from group D
- up to two (2) may be chosen from Certificate II or Certificate III level from this, or any other Training Package or accredited course
Units chosen must be relevant to the job function.
There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
Core units of competency |
|
Unit code |
Unit title |
BSBSUS201A |
Participate in environmentally sustainable work practices |
RIICOM201D |
Communicate in the workplace |
RIIWHS201D |
Work safely and follow WHS policies and procedures |
RIIRIS201D |
Conduct local risk control |
Electives |
|
Group A |
|
Unit code |
Unit title |
RIIQUA201D |
Maintain and monitor site quality standards |
RIIGOV201D |
Comply with site work processes/procedures |
Group B |
|
Unit code |
Unit title |
RIIERR205D |
Apply initial response first aid |
RIIERR302D |
Respond to local emergencies and incidents |
RIIENV202D |
Suppress airborne contaminants |
RIIMCO202D |
Conduct mobile slew conveyor operations |
RIIMEX202D |
Install open-cut mine ground support |
RIIMEX203D |
Break oversize rock |
RIIMEX204D |
Conduct workboat/barge operations |
RIIMPO203D |
Support bucket wheel system operations |
RIIMPO204D |
Conduct conveyor shifting dozer operations |
RIIMPO205D |
Operate roller/compactor |
RIIMPO206D |
Conduct bulk water truck operations |
RIIMPO208D |
Operate support equipment |
RIIMPO336D |
Conduct belly dump truck operations |
RIIMPO337D |
Conduct articulated truck operations |
RIIMPO338D |
Conduct rigid haul truck operations |
RIIPEO201D |
Conduct conveyor operations |
RIIPEO202D |
Provide deck support for conveyor-car high wall mining operations |
RIIPEO203D |
Conduct stacker operations |
RIIPEO206D |
Lay and recover cables and hoses |
RIIPRO201D |
Conduct crushing operations |
RIIPRO202D |
Conduct screening and conveying operations |
RIIPRO203D |
Operate programmable logic control systems |
RIIPRO205D |
Conduct blending plant operations |
RIISAM202D |
Isolate and access plant |
RIISAM214D |
Provide support to electrical tradesperson |
RIISRM302D |
Conduct stockpile reclaiming operations |
RIIVEH201D |
Operate light vehicle |
RIIWMG201D |
Conduct dewatering activities in surface operations |
Group C |
|
Unit code |
Unit title |
BSBITU101A |
Operate a personal computer |
RIIBEF201D |
Plan and organise work |
RIIBEF202D |
Identify and rectify site operating problems |
RIIBLA203D |
Conduct mobile mixing of explosives |
RIIBLA205D |
Store, handle and transport explosives |
RIICCM208D |
Carry out basic levelling |
RIIENV201D |
Identify and assess environmental and heritage concerns |
RIIERR201D |
Conduct fire team operations |
RIIHAN201D |
Operate a forklift |
RIIHAN203D |
Conduct lifting operations |
RIIHAN206D |
Transport plant, equipment and personnel |
RIIHAN208D |
Perform dogging |
RIIHAN209D |
Perform basic rigging |
RIIHAN210D |
Perform intermediate rigging operations |
RIIHAN211D |
Conduct basic scaffolding operations |
RIIHAN212D |
Conduct non-slewing crane operations |
RIIWHS202D |
Enter and work in confined spaces |
RIIWHS204D |
Work safely at heights |
RIIRIS202D |
Respond to site based spills |
RIISAM205D |
Cut, weld and bend materials |
RIISAM207D |
Apply operational maintenance skills |
RIISAM208D |
Perform plant operational maintenance |
RIISAM210D |
Remove and fit wheel assemblies |
RIISAM211D |
Remove, repair and refit tyres and tubes |
RIISAM212D |
Service mine plant and equipment |
RIISAM213D |
Position and set up mobile lighting |
RIISAM302D |
Service and handover plant and machines |
RIISTD202D |
Collect routine site samples |
RIIVEH202D |
Operate a medium vehicle |
RIIVEH305D |
Operate and maintain a four wheel drive vehicle |
AHCNAR201A |
Carry out natural area restoration works |
AHCSAW201A |
Conduct erosion and sediment control activities |
AHCNAR303A |
Implement revegetation works |
AHCSAW301A |
Construct conservation earthworks |
TLID2022A |
Conduct weighbridge operations |
Group D |
|
Unit Code |
Unit Title |
CPCCLDG3001A |
Licence to perform dogging |
CPCCLRG3001A |
Licence to perform rigging basic level |
CPCCLRG3002A |
Licence to perform rigging intermediate level |
CPCCLSF2001A |
Licence to erect, alter and dismantle scaffolding basic level |
TLILIC2001A |
Licence to operate a forklift truck |
TLILIC3006A |
Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)` |
Qualification Mapping Information
No equivalent Qualification.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272