Modification History
Not applicable.
Unit Descriptor
Unit Descriptor |
This unit covers the competency required to prepare and fire explosive ordnance and to conduct an assessment of the explosive ordnance firing in support of explosive ordnance assessment. This unit does not require the use of sophisticated measuring or tracking equipment. |
Application of the Unit
Application of the Unit |
This competency normally applies to the individual who is required to prepare and fire explosive ordnance and conduct an assessment of the explosive ordnance firing in support of explosive ordnance assessment. Assessment of explosive ordnance is a process used to determine whether the explosive ordnance is performing within specified tolerances. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Pre-requisite Unit /s |
Nil |
Employability Skills Information
Employability Skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a Unit of Competency. |
Performance Criteria describe the required performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the Required Skills and Knowledge and/or the Range Statement. Assessment of performance is to be consistent with the Evidence Guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Prepare for firing |
1.1 Requirements for firing of explosive ordnance are identified and clarified 1.2 Occupational health and safety (OH&S) requirements including those specific to the nature of the ordnance are identified and applied throughout the operation 1.3 Firing methods are confirmed in accordance with policy and procedures 1.4 Liaison with and notification of parties affected by the firing is undertaken in accordance with Range Standing Orders and local requirements 1.5 Site/equipment preparation is completed in accordance with organisation policy and procedures, and Range Standing Orders 1.6 Net explosive quantities are identified, calculated and monitored throughout the operation 1.7 Compatibility is identified, analysed and applied throughout the operation 1.8 Test equipment is set up in accordance with instructions |
2. Fire explosive ordnance |
2.1 Explosive ordnance and firing mechanisms are prepared and tested in accordance with Range Standing Orders and organisation policy 2.2 Explosive ordnance is fired in accordance with Range Standing Orders and organisation policy 2.3 Residue is inspected to ensure all explosives have been fired in accordance with Range Standing Orders 2.4 Measurements are taken and recorded in accordance with instructions |
3. Finalise the firing process |
3.1 Recorded measurements are assessed against standards and results are documented in accordance with organisation policy and procedures 3.2 Site/equipment is maintained and/or refurbished in accordance with policy and procedures, and Range Standing Orders 3.3 Documentation and records are maintained in accordance with policy and Range Standing Orders |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This describes the essential skills and knowledge and their level, required for this unit. |
Required Skills |
|
Required Knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
Assessment must confirm the ability to:
Consistency in performance Competency should be demonstrated in a range of actual or simulated explosive ordnance contexts. |
Context of and specific resources for assessment |
Context of assessment Competency should be assessed in the workplace or under conditions, which accurately simulate a realistic workplace. The competency should be assessed in a wide range of activities related to the storage, distribution and maintenance of explosive ordnance and other hazardous materials. Specific resources for assessment Access is required to:
|
Method of assessment |
This unit may be assessed with the following unit:
In a public safety environment assessment is usually conducted via direct observation in a training environment or in the workplace via subject matter supervision and/or mentoring, which is typically recorded in a competency workbook. Assessment is completed using appropriately qualified assessors who select the most appropriate method of assessment. Assessment may occur in an operational environment or in an industry-approved simulated work environment. Forms of assessment that are typically used include:
|
Range Statement
RANGE STATEMENT |
|
The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. |
|
Explosive ordnance to be fired may include |
Aerial delivered ordnance Actuating devices Demolition stores Free flight rockets Fuzes Grenades Guided weapons Gun ammunition Mines Missile motors Missiles Mortars Propellants Pyrotechnics and countermeasures Rocket motors Small arms ammunition Warheads |
Organisation may include |
Defence organisation Enterprises that work with explosive ordnance Other government departments or instrumentalities that work with explosive ordnance |
Net explosive quantities may include |
The explosive capacity calculated in a wide range of activities related to the storage, distribution and maintenance of explosive ordnance |
Compatibility is |
Assessed in a wide range of activities related to the storage, distribution and maintenance of explosive ordnance and other hazardous materials |
Test equipment may include |
Cameras Targets Timing devices |
Measurements may include |
Continuity tests on electric detonators Continuity test on firing cables Discontinuity test on firing cables Fuze actions Resistance test on firing cables Safety fuze burning times Weapon/ammunition/warhead/explosive effect |
Unit Sector(s)
Not applicable.