Modification History
Not applicable.
Unit Descriptor
Unit Descriptor |
This unit covers the competency required to conduct external maintenance on all types of explosive ordnance. |
Application of the Unit
Application of the Unit |
This competency normally applies to the individual who is required to conduct external maintenance on all types of explosive ordnance by the removal of rust and contaminants, cleaning, painting and stencilling standard markings. Maintenance is carried out on the explosive ordnance while monitoring the environmental conditions and fully adhering to occupational health and safety (OH&S) requirements. The unit only applies to the maintenance of explosive ordnance that does not require the removal of any explosive component. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Pre-requisite Unit /s |
Nil |
Employability Skills Information
Employability Skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a Unit of Competency. |
Performance Criteria describe the required performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the Required Skills and Knowledge and/or the Range Statement. Assessment of performance is to be consistent with the Evidence Guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Prepare for maintenance |
1.1 Requirement for external maintenance is identified from work requests/instructions and is confirmed 1.2 OH&S requirements, including those contained in organisational procedures, are applied throughout the operation 1.3 Technical references , tools, equipment and consumables required for the maintenance are identified, acquired and prepared in accordance with organisation procedures 1.4 The explosive ordnance is acquired, identified and accounted for, moved or pre-positioned in preparation for maintenance 1.5 Net explosive quantities and compatibility are identified, calculated and assessed and applied throughout the operation |
2. Maintain explosive ordnance |
2.1 Explosive ordnance is maintained in accordance with organisation policy and procedures, and technical specifications 2.2 Environmental conditions are monitored and, where appropriate, maintained in accordance with organisation policy |
3. Carry out post maintenance procedures |
3.1 Explosive ordnance is processed in accordance with organisation procedures 3.2 Housekeeping procedures are conducted in accordance with workshop requirements 3.3 Documentation and records are maintained in accordance with statutory, organisation and workshop requirements |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This describes the essential skills and knowledge and their level, required for this unit. |
Required Skills |
|
Required Knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
Assessment must confirm the ability to comply with:
Assessment must also confirm the ability to work safely within an explosive ordnance environment and to:
Consistency in performance Competency should be demonstrated in a range of actual or simulated explosive ordnance contexts. |
Context of and specific resources for assessment |
Context of assessment Competency should be assessed in the workplace or in a simulated work environment, in accordance with all relevant legislation and organisation requirements. Specific resources for assessment Access is required to:
|
Method of assessment |
This unit may be assessed with the following unit:
In a public safety environment assessment is usually conducted via direct observation in a training environment or in the workplace via subject matter supervision and/or mentoring, which is typically recorded in a competency workbook. Assessment is completed using appropriately qualified assessors who select the most appropriate method of assessment. Assessment may occur in an operational environment or in an industry-approved simulated work environment. Forms of assessment that are typically used include:
|
Range Statement
RANGE STATEMENT |
|
The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. |
|
Explosive ordnance external maintenance may include |
Cleaning Painting Removal of rust and contamination Stencilling standard markings |
Organisation may include |
Defence organisation Enterprises that work with explosive ordnance Other government departments or instrumentalities that work with explosive ordnance |
Technical references may include |
Technical drawings Technical reference pamphlets Orders and instructions Other publications |
Consumables may include |
Cleaning materials Packaging materials Paint |
Net explosive quantities include |
Explosive capacity calculated in a wide range of activities related to the storage, distribution and maintenance of explosive ordnance |
Compatibility is |
Assessed in a wide range of activities related to the storage, distribution and maintenance of explosive ordnance and other hazardous materials |
Environmental conditions may include |
Heat Humidity Pressure |
Processing may include |
Passing for disposal Preparing for issue Returning to storage |
Documentation and records may include |
Receipt and issue records Timesheets Work records |
Unit Sector(s)
Not applicable.