Modification History
Release |
Comments |
Release 2 |
This version released with PPM Pulp and Paper Manufacturing Training Package Version 2.0 |
Release 1 |
This version released with PPM Pulp and Paper Manufacturing Training Package Version 1.0. |
Qualification Description
This qualification describes the skills and knowledge of individuals who perform production roles in a papermaking operation. Work activities involve the application of technical skills and knowledge using some discretion and judgement. Individuals in these roles generally provide technical advice and support to a team and work under general supervision. They would be expected to apply technical knowledge to rectify a range of predictable and unforeseen problems relating to start up, operation and shutdown activities.
Job roles
A key focus of the qualification, and therefore vocational outcomes, is on skills for performing production operations, mainly through start-up & shut down of papermaking and ancillary equipment and processes, and will reflect the duties of a production employee or technician in one or more of the following areas:
Stock preparation and handling; fibre preparation; wet end operations; dry end operations; finishing and converting; coating systems operator; winder/reel and roll operations; packaging/folding; dry end testing.
Co-located job roles
Electricity Generation/Turbine Operator; Steam Generation/Boilerhouse Operator; Water Services Operator; Chemical Recovery Operator.
Licensing, legislative, regulatory, or certification requirements apply to some units in this qualification in some states and territories at the time of publication and may differ according to jurisdiction.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
To achieve this qualification, competency must be demonstrated in:
- 13 units of competency:
- 5 core units plus
- 8 elective units.
Elective units must ensure the integrity of the qualification’s Australian Qualification Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome.
All units within at least one Industry Specific group must be selected. Remaining electives may be selected from the Elective Units list and can include up to two (2) units from an endorsed Training Package or State/Territory accredited course.
In the Steam Generation sector, if the type of equipment used denotes that a High Risk Work Licence is required, the unit MSMBLIC001 must be used. For equipment use that does not require a High Risk Work Licence, the PPMSTM units may be used.
Core Units
BSBFLM312 |
Contribute to team effectiveness |
MSS402051 |
Apply quality standards |
PPMNUM320 |
Measure and calculate routine workplace data |
PPMPRS210 |
Identify and rectify problems in the workplace |
PPMWHS210 |
Participate in WHS processes |
Industry Specific Elective Units
Chemical recovery operations
PPMREC320 |
Prepare and start up chemical recovery operations |
PPMREC330 |
Coordinate and implement chemical recovery shutdowns |
Coated paper processes
PPMCPP320 |
Prepare and start up coated paper processes |
PPMCPP330 |
Coordinate the shutdown of coated paper processes |
Dry end operations
PPMDEO320 |
Prepare and start up dry end operations |
PPMDEO330 |
Coordinate and implement dry end shutdown |
Electrical power generation
PPMEPG320 |
Manage a power generation system start up |
PPMEPG330 |
Coordinate power generation system shutdown |
Finishing and converting
PPMFCO320 |
Prepare and start up finishing and converting operations |
PPMFCO340 |
Troubleshoot and rectify finishing and converting systems |
Steam generation
MSMBLIC001 |
Licence to operate a standard boiler |
OR |
|
PPMSTM320 |
Manage steam boiler startup |
PPMSTM330 |
Shut down and bank steam boiler |
Water services
PPMWAS340 |
Troubleshoot and rectify water systems |
Wet end operations
PPMWEO320 |
Prepare and start up wet end operations |
PPMWEO330 |
Coordinate and implement wet end shutdown |
Elective Units
Business support
BSBFLM305 |
Support operational plan |
BSBFLM309 |
Support continuous improvement systems and processes |
BSBFLM311 |
Support a workplace learning environment |
BSBRES411 |
Analyse and present research information |
BSBRSK401 |
Identify risk and apply risk management processes |
BSBWRK409 |
Prepare for and participate in dispute resolution |
PPMREL210 |
Contribute to effective working relationships |
Chemical preparation
PPMCPR210 |
Prepare chemical products |
Chemical recovery operations
PPMREC440 |
Troubleshoot and rectify chemical recovery operations |
Coated paper processes
PPMCPP210 |
Monitor and control coated paper processes |
PPMCPP440 |
Troubleshoot and rectify coated paper processes |
Communication
BSBCMM201 |
Communicate in the workplace |
Computer / process control equipment
MSMOPS212 |
Use organisation computers or data systems |
PPMCSK310 |
Operate process control equipment |
Dry end operations
PPMDEO210 |
Monitor and control dry end operations |
PPMDEO440 |
Troubleshoot and rectify dry end systems |
Electrical power generation
PPMEPG440 |
Troubleshoot and rectify power generation system |
Emergency procedures / safety
BSBWHS401 |
Implement and monitor WHS policies, procedures and programs to meet legislative requirements |
BSBWHS404 |
Contribute to WHS hazard identification, risk assessment and risk control |
BSBWHS405 |
Contribute to implementing and maintaining WHS management systems |
MSMWHS110 |
Follow emergency response procedures |
PMAWHS211 |
Prepare equipment for emergency response |
Environmental monitoring
PPMENV210 |
Identify and monitor environmental discharges/emissions |
PPMENV320 |
Monitor and control environmental hazards |
First aid
HLTAID003 |
Provide first aid |
MSAPMOHS220A |
Provide initial First Aid response |
Laboratory operations
MSL904002 |
Perform standard calibrations |
MSL973013 |
Perform basic tests |
Load shifting
PPMMHV210 |
Operate overhead crane |
TLID2003 |
Handle dangerous goods/hazardous substances |
TLID2010 |
Operate a forklift |
TLID2013 |
Move materials mechanically using automated equipment |
TLID2047 |
Prepare cargo for transfer with slings |
TLID3011 |
Conduct specialised forklift operations |
TLID3031 |
Rig load |
TLID3035 |
Operate a boom type elevating work platform |
Numeracy
MSS404052 |
Apply statistics to operational processes |
PPMNUM210 |
Estimate and calculate basic data |
Planning and organising
BSBADM405 |
Organise meetings |
MEM14005A |
Plan a complete activity |
MEM30020A |
Develop and manage a plan for a simple manufacturing related project |
Preventative maintenance / operator maintainer
MEM09002B |
Interpret technical drawing |
MEM12023A |
Perform engineering measurements |
MEM18001C |
Use hand tools |
MEM18002B |
Use power tools/hand held operations |
MEM18055B |
Dismantle, replace and assemble engineering components |
MSS402081 |
Contribute to the application of a proactive maintenance strategy |
PPMPRM210 |
Undertake operator level preventative maintenance |
PPMPRM220 |
Perform lubrication |
Production support
MEM18011C |
Shut down and isolate machines/equipment |
MSS402020 |
Apply quick changeover procedures |
MSS402040 |
Apply 5S procedures |
MSS402050 |
Monitor process capability |
MSS403002 |
Ensure process improvements are sustained |
MSS403032 |
Analyse manual handling processes |
MSS403040 |
Facilitate and improve implementation of 5S |
MSS403051 |
Mistake proof an operational process |
PPMPRS320 |
Solve systemic problems in the workplace |
PPMPRV210 |
Operate ancillary equipment |
PPMPRV320 |
Co-ordinate and direct clothing changes |
Quality
PPMQAS210 |
Apply basic quality practices |
PPMQAS420 |
Co-ordinate in-process quality assurance |
Security
CPPSEC2011B |
Control access to and exit from premises |
CPPSEC2015A |
Patrol premises |
CPPSEC3007A |
Maintain security of environment |
Steam generation
MSMBLIC001 |
Licence to operate a standard boiler |
MSMBLIC002 |
Licence to operate an advanced boiler |
PPMSTM210 |
Monitor and control boiler operation |
PPMSTM440 |
Troubleshoot and rectify boiler plant systems |
Sustainability
FWPCOT3263 |
Maintain and contribute to energy efficiency |
MSMENV472 |
Implement and monitor environmentally sustainable work practices |
MSS014003 |
Optimise sustainability of a process or plant area |
TLIU4001 |
Implement and monitor environmental protection policies and procedures |
Training and assessment
TAEASS301 |
Contribute to assessment |
TAEDEL301 |
Provide work skill instruction |
TAEDEL404 |
Mentor in the workplace |
(The following 3 units count as 1 unit) |
|
TAEASS401 |
Plan assessment activities and processes |
TAEASS402 |
Assess competence |
TAEASS403 |
Participate in assessment validation |
Water services
PPMWAS210 |
Operate water systems |
Wet end operations
PPMWEO210 |
Monitor and control wet end operations |
PPMWEO440 |
Troubleshoot and rectify wet end systems |
Workplace health and safety
PPMWHS310 |
Contribute to WHS processes |
PPMWHS320 |
Maintain WHS processes |
Qualification Mapping Information
Code and title current version |
Code and title previous version |
Comments |
Equivalence status |
PPM30216 Certificate III in Papermaking Operations Release 2 |
PPM30216 Certificate III in Papermaking Operations Release 1 |
Electives relating to Boiler Operations updated |
Equivalent qualification |
Links
Companion Volumes, including Implementation Guides, are available at VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=12998f8d-d0ac-40bc-a69e-72a600d4fd93