Unit of competency

Modification History

Release 1. Supersedes and is equivalent to PMC552024C Hand mould products.

Application

This unit of competency covers the skills and knowledge required to hand mould products using clay, ceramic, plaster and other materials.

This unit of competency applies to operators who are required to select and prepare moulds, mould and remove the product, finish and store the product and rectify routine problems.

This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Pre-requisite Unit

Nil

Competency Field

Operations

Unit Sector

Not applicable

Elements and Performance Criteria

Foundation Skills

This section describes those required skills (language, literacy and numeracy) that are essential to performance.

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Range of Conditions

Unit Mapping Information

Release 1. Supersedes and is equivalent to PMC552024C Hand mould products.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=45a7f1d5-61a5-447a-9688-7abbd7e1a5c7

Assessment requirements

Modification History

Release 1. Supersedes and is equivalent to PMC552024C Hand mould products.

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria and demonstrate the ability to:

• assemble and prepare mould/former to meet specifications
• introduce materials into the mould and apply compacting
• remove product from mould
• distinguish between defects for repair and defects unable to be rectified
• apply finishing and repair techniques
• dry and cure the product to specifications
• monitor key variables, including:

• supply of materials
• distribution and compaction of materials
• stability of mould/former and inserts
• sectional profile of product
• specification of materials
• product integrity and general conformance to specification

• make adjustments to meet product quality and production output specifications
• handle/store products
• identify hazards and apply relevant hazard controls
• apply safety procedures
• apply housekeeping procedures
• recognise out-of-specification products, process problems and materials faults
• recognise routine and non-routine problems
• identify when the operator is able to rectify problems, when assistance is required and who is the appropriate source for assistance
• take action to resolve problems or report them to appropriate personnel
• distinguish between possible causes of routine problems, including:

• raw material variations
• equipment malfunctions
• process abnormalities

• communicate effectively with team/work group and supervisors
• read and interpret product specifications, job sheets, procedures, material labels and safety information
• complete workplace records
• do basic arithmetical manipulations, including additions, subtractions, divisions, fractions and percentages.

Knowledge Evidence

Must provide evidence that demonstrates knowledge relevant to their job sufficient to operate under routine only supervision and to solve routine problems, including knowledge of:

• content and handling characteristics of the materials being moulded and:

• typical curing and drying requirements
• methods of repairing products
• types of faults that can be repaired
• types of faults that can’t be repaired

• functions and principles of operation of moulds and formers
• mould or former maintenance and inspection requirements
• the potential effects of variations in raw materials and process conditions in relation to quality of product/output
• factors which may affect product quality or production output and appropriate remedies
• routine problems, their probable causes and relevant corrective actions
• organisation procedures relevant to the work environment/job role
• hierarchy of control
• hazards that may arise in the job/work environment and:

• their possible causes
• potential consequences
• appropriate risk controls.

Assessment Conditions

• The unit should be assessed holistically and the judgement of competence shall be based on a holistic assessment of the evidence.
• The collection of performance evidence:

• should occur over a range of situations which include typical disruptions to normal, smooth operation of an operating plant
• will typically include a supervisor/third-party report or other evidence, focusing on consistent performance and problem recognition and solving. A supervisor/third-party report must be prepared by someone who has a direct, relevant, current relationship with the person being assessed and who is in a position to form a judgement on workplace performance relevant to the unit of competency
• may use industry-based simulation for all or part of the unit particularly where safety, lack of opportunity or significant cost is an issue.

• Assessment should occur in operational workplace situations. Where this is not possible or where personal safety or environmental damage are limiting factors assessment must occur in a sufficiently rigorous simulated environment that reflects realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
• Assessment in a simulated environment should use evidence collected from demonstration of skills and one or more of:

• walk-throughs
• pilot plant operation
• industry-based case studies/scenarios
• ‘what ifs’.

• Knowledge evidence may be collected concurrently with performance evidence (provided a record is kept) or through an independent process such as workbooks, written assessments or interviews (provided a record is kept).
• Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
• Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.
• The regulatory framework will be reflected in workplace policies and procedures and is not required to be independently assessed.
• Foundation skills are integral to competent performance of the unit and should not be assessed separately.
• Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
• In addition the assessor or anyone acting in subject matter expert role in assessment shall demonstrate both technical competency and currency. If the assessor cannot demonstrate technical competency and currency they shall assess with a subject matter expert who does meet these requirements.
• Technical competence can be demonstrated through one or more of:

• relevant VET or other qualification/Statement of Attainment
• appropriate workplace experience undertaking the type of work being assessed under routine and non-routine conditions
• appropriate workplace experience supervising/evaluating the type of work being assessed under routine and non-routine conditions

• Currency can be demonstrated through one or more of:

• being currently employed undertaking the type of work being assessed
• being employed by the organisation undertaking the type of work being assessed and having maintained currency in accordance with that organisation’s policies and procedures
• having consulted/had contact with an organisation undertaking the type of work being assessed within the last twelve months, the consultation/contact being related to assessment
• conducting on the job training/assessments of the type of work being assessed
• being an active member of a relevant professional body and participating in activities relevant to the assessment of this type of work.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=45a7f1d5-61a5-447a-9688-7abbd7e1a5c7