^

 
 

Qualification details

PMC20116 - Certificate II in Manufactured Mineral Products (Release 1)

Summary

Usage recommendation:
Deleted
The Deleted usage recommendation was implemented on 13 June 2017 to describe training components that have no replacement. Enrolments in training components and statements of attainment or qualifications issued before 13 June 2017 are valid. For any components marked as deleted after 13 June 2017, the applicable transition/teach-out periods apply. For specific questions regarding the enrolment, delivery or issuance of a statement of attainment/qualification, please contact your training regulator.
Mapping:
MappingNotesDate
DeletedDeleted from PMC Manufactured Mineral Products07/Nov/2018
Supersedes and is equivalent to PMC20110 - Certificate II in Manufactured Mineral ProductsSupersedes and is equivalent to PMC20110 Certificate II in Manufactured Mineral Products.21/Jun/2016

Releases:
ReleaseRelease date
1 1 (this release) 22/Jun/2016


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnUsage RecommendationSort Table listing Units of Competency by the Usage Recommendation columnEssentialSort Table listing Units of Competency by the Essential column
PMC552043 - Operate float forming equipmentOperate float forming equipmentDeletedElective
MSMPER201 - Monitor and control work permitsMonitor and control work permitsCurrentElective
PMC552023 - Finish products after firingFinish products after firingSupersededElective
MSMWHS110 - Follow emergency response proceduresFollow emergency response proceduresCurrentElective
PMC552024 - Hand mould productsHand mould productsSupersededElective
PMC552052 - Cast moulded concrete productsCast moulded concrete productsSupersededElective
PMC552056 - Assemble, fabricate and place reinforcementAssemble, fabricate and place reinforcementSupersededElective
PMC552045 - Operate container forming equipmentOperate container forming equipmentDeletedElective
MSS402051 - Apply quality standardsApply quality standardsCurrentElective
MSMSUP292 - Sample and test materials and productSample and test materials and productCurrentElective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 90

Classifications

SchemeCodeClassification value
ANZSCO Identifier 711100 Clay, Concrete, Glass And Stone Processing MacHine Operators 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 
Qualification/Course Level of Education Identifier 521 Certificate II 
Taxonomy - Industry Sector N/A Raw Material Manufacturing 
Taxonomy - Occupation N/A Waremaker,Kiln Operator,Clay Products Equipment Operator,Ceramic Products Equipment Operator,Cement Plant Operator,Glass Products Equipment Operator,Fibrous Plasterboard Making Operator,Cement Products Equipment Operator,Concrete Products Equipment Operator,Fibre Cement Board Making Operator,Premixed Concrete Operator Driver 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 711100 Clay, Concrete, Glass And Stone Processing MacHine Operators 14/Oct/2016 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 14/Oct/2016 
Qualification/Course Level of Education Identifier 521 Certificate II 22/Jun/2016 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 1. Supersedes and is equivalent to PMC20110 Certificate II in Manufactured Mineral Products.

Qualification Description

The PMC20116 Certificate II in Manufactured Mineral Products covers the skills and knowledge required to perform a range of process operations within the manufactured mineral products industries.

The qualification is suitable to prepare new employees and to develop existing workers to perform an operational role to directly produce product.

The operator will be able to operate production equipment within defined specifications and procedures and carry out a range of support functions. The operator will be able to apply technical and procedural knowledge to a defined range of situations and activities.

The operator will be able to solve predictable problems by applying known solutions and will report non-routine problems to appropriate personnel.

The qualification provides the skills and knowledge relevant to the following sectors:

  • cement
  • precast concrete products
  • premixed concrete
  • clay products
  • ceramic products
  • float (flat) glass
  • glass containers
  • refractories
  • plaster (both fibrous plaster and plaster boards)
  • fibre cement boards and other products
  • ground minerals
  • abrasive grinding wheels and cutting discs.

For job roles at Certificate I level see MSM10116 Certificate I in Process Manufacturing.

For people who do not directly produce product but work in production support roles see MSM20116 Certificate II in Process Manufacturing.

For people who require a more generalist qualification covering the application of good manufacturing practice and lean principles see MSS20316 Certificate II in Competitive Systems and Practices.

The PMC20116 Certificate II in Manufactured Mineral Products contains units of competency that can be credited towards other manufacturing qualifications such as:

  • PMC30116 Certificate III in Manufactured Mineral Products
  • MSM30116 Certificate III in Process Manufacturing
  • MSS30316 Certificate III in Competitive Systems and Practices

There are no specific licenses that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some jurisdictions. Local regulations should be checked for details.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To be awarded the PMC20116 Certificate II in Manufactured Mineral Products competency must be achieved in fifteen  (15 ) units of competency:

  • six  (6 ) core units of competency
  • nine  (9 ) elective units of competency from Groups A and B, as specified below.
  • A minimum of two (2)  specialist elective units must be chosen from Group A; up to one  (1 ) specialist elective unit may be chosen from Group A of PMC30116 Certificate III in Manufactured Mineral Products
  • The balance of units, to a maximum of seven  (7 ), may be chosen from Group A or Group B to bring the total number of electives to fifteen  (15 ).

Up to four  (4 ) of the elective units of competency can be selected from this Training Package; other endorsed Training Packages and accredited courses, where those units are available at Certificate II or III.

Note:  Where prerequisite units apply, these must be counted in the total number of units required for achievement of the qualification.

Core units of competency  

Unit code 

Unit title 

MSMENV272

Participate in environmentally sustainable work practices

MSMWHS200

Work safely

MSMSUP100

Apply workplace procedures

MSMSUP101

Clean workplace or equipment

MSMSUP102

Communicate in the workplace

Select one  (1 ) of the following units. Note that only MSMOPS101 OR  PMAOPS101 may be included in this qualification, not both.

Unit code 

Unit title 

Prerequisites 

MSMOPS101

Make measurements

PMAOPS101

Read dials and indicators

Elective units of competency  

Group A  - Specialist electives 

Unit code 

Unit title 

Prerequisites 

MSMOPS200

Operate equipment

MSMOPS212

Use enterprise computers or data systems

MSMSUP230

Monitor process operations

PMAOPS216

Operate local control system

PMC552002

Operate equipment to blend/mix materials

PMC552003

Operate grinding equipment

PMC552004

Prepare for production

PMC552005

Process greenware/green products

PMC552006

Operate an autoclave

PMC552007

Heat accelerate the curing of precast concrete

PMC552008

Operate crushing equipment

PMC552010

Operate a calcining kiln

PMC552020

Operate slip casting equipment

PMC552021

Operate manual glazing equipment

PMC552022

Prepare materials for clay and ceramic production

PMC552023

Finish products after firing

PMC552024

Hand mould products

PMC552030

Operate a firing kiln

PMC552031

Operate extrusion equipment

PMC552032

Operate pressing equipment

PMC552040

Operate glass melting process

PMC552041

Operate process ovens

PMC552042

Operate blown insulation equipment

PMC552043

Operate float forming equipment

PMC552044

Operate fibre forming equipment

PMC552045

Operate container forming equipment

PMC552046

Operate glass printing equipment

PMC552047

Operate primary annealing equipment

PMC552048

Operate glass finishing equipment

PMC552049

Operate on-line stacking and assembly equipment

PMC552050

Schedule, cut and bend reinforcement

PMC552051

Finish green concrete products

PMC552052

Cast moulded concrete products

PMC552053

Finish cured concrete products

PMC552054

Spin concrete pipes

PMC552055

Conduct benching operations

PMC552056

Assemble, fabricate and place reinforcement

PMC552057

Finish casting operation

PMC552058

Demould concrete products

PMC552060

Batch mix concrete

PMC552061

Deliver concrete to site

PMC552065

Prepare asphalt

PMC552070

Operate forming equipment

PMC552072

Produce fibrous plasterboard

PMC552090

Use and maintain tools and equipment for refractory operations

PMC552091

Prepare for, install and repair refractory brickwork/blockwork

PMC552092

Prepare for and install mouldable refractory materials

PMC552093

Prepare for and cast refractory materials

PMC552094

Prepare for and apply shotcrete for installation

PMC552095

Prepare for, install and repair ceramic fibre

Up to one  (1 ) specialist elective unit may be chosen from Group A of PMC30116 Certificate III in Manufactured Mineral Products.

Group B - Other electives 

Unit code 

Unit title 

Prerequisites 

RIIRIS201D

Conduct local risk control

MSS402030

Apply cost factors to work practices

MSS402031

Interpret product costs in terms of customer requirements

MSS402040

Apply 5S procedures

MSS402050

Monitor process capability

MSS402051

Apply quality standards

MSS402060

Use planning software systems in operations

MSS402080

Undertake root cause analysis

MSS402081

Contribute to the application of a proactive maintenance strategy

MSMWHS110

Follow emergency response procedures

MSMOPS100

Use equipment

MSMPER200

Work in accordance with an issued permit

MSMPER201

Monitor and control work permits

MSMPER202

Observe permit work

MSMPER205

Enter confined space

MSMSUP106

Work in a team

MSMSUP200

Achieve work outcomes

MSMSUP210

Process and record information

MSMSUP240

Undertake minor maintenance

MSMSUP280

Manage conflict at work

MSMSUP292

Sample and test materials and product

MSL952001

Collect routine site samples

PMAOPS105

Select and prepare materials

PMBHAN103

Shift materials safely by hand

PMC561072

Store materials for production

PMC561080

Organise self

PMC562070

Move materials

PMC562071

Operate bulk materials handling equipment

PMC562081

Deliver customer service

PMC562083

Allocate and complete team tasks

TLIC3003

Drive medium rigid vehicle

TLIC3004

Drive heavy rigid vehicle

TLID2010

Operate a forklift

Note : Only one  of TLIC3003 or  TLIC3004 may be included in this qualification, not both.

Up to four  (4 ) relevant units may be selected from this Training Package, other endorsed Training Packages and accredited courses, where those units are packaged in Certificates II or III.

Qualification Mapping Information

Release 1. Supersedes and is equivalent to PMC20110 Certificate II in Manufactured Mineral Products.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=45a7f1d5-61a5-447a-9688-7abbd7e1a5c7