Training package details

PMC - Manufactured Mineral Products (Release 1.0)

Summary

Releases:
ReleaseStatusRelease dateApproval process
1.0 1.0 (this release)Current 22/Jun/2016Endorsement date: 15/Jun/2016

Usage recommendation:
Deleted
The Deleted usage recommendation was implemented on 13 June 2017 to describe training components that have no replacement. Enrolments in training components and statements of attainment or qualifications issued before 13 June 2017 are valid. For any components marked as deleted after 13 June 2017, the applicable transition/teach-out periods apply. For specific questions regarding the enrolment, delivery or issuance of a statement of attainment/qualification, please contact your training regulator.
Mapping:
MappingNotesDate
Supersedes and is equivalent to PMC10 - Manufactured Mineral ProductsRelease 1 of the PMC Manufactured Mineral Products Training Package supersedes and is equivalent to PMC10. 22/Jun/2016


Disclaimer:
Following the establishment of the new training package development process, any references to the former Industry Skills Councils (ISCs) found in the content of this training package or its components should be referred to the Skills Service Organisation listed below.

Training Package Developer

Organisation:
Innovation and Business Skills Australia 
Group name:
Innovation & Business Skills Australia 
Job title:
 
Phone:
(03) 9815 7099 
Mobile:
 
Fax:
+61 3 9815 7001 
Email:
manufacturing@ibsa.org.au 
Address:
Level 11
176 Wellington Parade
East Melbourne VIC 3002 

Qualifications

 CodeTitleUsageRelease

Toggle visibility of information in grouping for 'Qualification Level: Certificate II'Qualification Level: Certificate II

 PMC20116 - Certificate II in Manufactured Mineral ProductsCertificate II in Manufactured Mineral Products Deleted

Toggle visibility of information in grouping for 'Qualification Level: Certificate III'Qualification Level: Certificate III

 PMC30116 - Certificate III in Manufactured Mineral ProductsCertificate III in Manufactured Mineral Products Superseded

Toggle visibility of information in grouping for 'Qualification Level: Certificate IV'Qualification Level: Certificate IV

 PMC40116 - Certificate IV in Manufactured Mineral ProductsCertificate IV in Manufactured Mineral Products Deleted

Toggle visibility of information in grouping for 'Qualification Level: Diploma'Qualification Level: Diploma

 PMC50116 - Diploma of Manufactured Mineral ProductsDiploma of Manufactured Mineral Products Deleted

Toggle visibility of information in grouping for 'Qualification Level: Advanced Diploma'Qualification Level: Advanced Diploma

 PMC60116 - Advanced Diploma of Manufactured Mineral ProductsAdvanced Diploma of Manufactured Mineral Products Deleted

Toggle visibility of information in grouping for 'Qualification Level: Graduate Certificate'Qualification Level: Graduate Certificate

 PMC80116 - Graduate Certificate in Refractories EngineeringGraduate Certificate in Refractories Engineering Deleted

Units of competency

CodeSort Table listing the units of competency related to this training package. by the Code columnTitleSort Table listing the units of competency related to this training package. by the Title columnUsageReleaseSort Table listing the units of competency related to this training package. by the Release column
PMC552002 - Operate equipment to blend/mix materialsOperate equipment to blend/mix materials Superseded
PMC552003 - Operate grinding equipmentOperate grinding equipment Superseded
PMC552004 - Prepare for productionPrepare for production Superseded
PMC552005 - Process greenware/green productsProcess greenware/green products Deleted
PMC552006 - Operate an autoclaveOperate an autoclave Deleted
PMC552007 - Heat accelerate the curing of precast concreteHeat accelerate the curing of precast concrete Superseded
PMC552008 - Operate crushing equipmentOperate crushing equipment Superseded
PMC552010 - Operate a calcining kilnOperate a calcining kiln Superseded
PMC552020 - Operate slip casting equipmentOperate slip casting equipment Superseded
PMC552021 - Operate manual glazing equipmentOperate manual glazing equipment Deleted
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 81

Imported units of competency

CodeTitleSort Table listing Imported units of competency by the Title columnUsageReleaseSort Table listing Imported units of competency by the Release columnBelongs to training package
LMTGN5004A - Manage installation and commissioning of equipment and systemsManage installation and commissioning of equipment and systems SupersededLMT07 - Textiles, Clothing and Footwear Training Package
MEM09002B - Interpret technical drawingInterpret technical drawing CurrentMEM05 - Metal and Engineering Training Package
MEM09003B - Prepare basic engineering drawingPrepare basic engineering drawing CurrentMEM05 - Metal and Engineering Training Package
MSAPMSUP201A - Receive or despatch goodsReceive or despatch goods CurrentMSA07 - Manufacturing Training Package
MSL916005 - Manage complex projectsManage complex projects SupersededMSL - Laboratory Operations
MSL952001 - Collect routine site samplesCollect routine site samples CurrentMSL - Laboratory Operations
MSL973001 - Perform basic testsPerform basic tests SupersededMSL - Laboratory Operations
MSL974005 - Perform physical testsPerform physical tests SupersededMSL - Laboratory Operations
MSMENV272 - Participate in environmentally sustainable work practicesParticipate in environmentally sustainable work practices CurrentMSM - Manufacturing Training Package
MSMENV472 - Implement and monitor environmentally sustainable work practicesImplement and monitor environmentally sustainable work practices CurrentMSM - Manufacturing Training Package
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 117
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form
Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.