Qualification details

PMB30116 - Certificate III in Polymer Processing (Release 1)

Summary

Releases:
ReleaseStatusRelease date
1 1 (this release)Current 22/Jun/2016

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to PMB30107 - Certificate III in Polymer ProcessingSupersedes and is equivalent to PMB30107 Certificate III in Polymer Processing. 21/Jun/2016


Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
FWPCOT2238 - Cut materials with a hand-held chainsawCut materials with a hand-held chainsaw Elective
HLTAID003 - Provide first aidProvide first aid Elective
LMTGN2008B - Coordinate work of team or sectionCoordinate work of team or section Elective
MEM03001B - Perform manual production assemblyPerform manual production assembly Elective
MEM03006B - Set assembly stationsSet assembly stations Elective
MEM09002B - Interpret technical drawingInterpret technical drawing Elective
MEM09003B - Prepare basic engineering drawingPrepare basic engineering drawing Elective
MEM11005B - Pick and process orderPick and process order Elective
MEM11006B - Perform production packagingPerform production packaging Elective
MEM11007B - Administer inventory proceduresAdminister inventory procedures Elective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 236

Classifications

SchemeCodeClassification value
ANZSCO Identifier 711514 Plastics Production MacHine Operator (General) 
ASCED Qualification/Course Field of Education Identifier 0303 Process And Resources Engineering 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Raw Material Manufacturing 
Taxonomy - Occupation N/A Extrusion Operator,Rotational Moulding Operator,Fabrication Operator (Plastics),Rubber Production Operator,Reinforced Hose Maker,Blow Moulding Operator,Plastics Production Operator,Composites Operator,Tyre Builder,Die Setter,Injection Moulding Operator,Rubber Moulding Machine Operator,Rubber Roll Builder,Cablemaker,Belt Installation and Repair Operator,Tyre Retreading Operator 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 711514 Plastics Production MacHine Operator (General) 14/Oct/2016 
ASCED Qualification/Course Field of Education Identifier 0303 Process And Resources Engineering 14/Oct/2016 
Qualification/Course Level of Education Identifier 514 Certificate III 22/Jun/2016 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 1. Supersedes and is equivalent to PMB30107 Certificate III in Polymer Processing.

Qualification Description

The PMB30116 Certificate III in Polymer Processing is intended for advanced operators who use production equipment to directly produce products.

The operator will be able to apply theoretical and technical knowledge and well developed skills to undertake advanced operations and exercise judgement in areas such as start-up and shutdown procedures and quality assurance.

The operator will be able to apply their knowledge to anticipate problems and to solve a range of routine and non-routine problems using product and process knowledge to develop solutions to problems which do not have a known solution or do not have a solution recorded in the procedures.

This qualification applies to the production of a wide range of polymer products and components ranging from consumer products to components to be included in other commercial, industrial or consumer products. Products may be made from a wide range of natural and synthetic polymers covering thermoplastics as well as thermosetting polymers. Production may be long runs of standard products, short runs or one offs of specialised products.

The qualification includes units of competency which are the beginning of the polymer technician stream and which contribute to a deeper knowledge of polymers and processes.

For people who do not directly produce product but work in production support roles see MSM30116 Certificate III in Process Manufacturing.

For people who require a more generalist qualification covering the application of good manufacturing practice and lean principles see MSS30316 Certificate III in Competitive Systems and Practices.

There are no specific licenses that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some jurisdictions. Local regulations should be checked for details.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To be awarded the PMB30116 Certificate III in Polymer Processing competency must be achieved in twenty-one  (21 ) units of competency:

  • four  (4 ) core units of competency
  • seventeen  (17 ) elective units of competency, as specified below.
  • a minimum of four  (4 ) units from Group A
  • a minimum of one  (1 ) unit from Group B
  • the balance of units may be chosen from Groups A, B and C, to bring the total number of electives to seventeen  (17 ).

Up to six  (6 ) of the elective units of competency can be chosen from other qualifications in this Training Package, other endorsed Training Packages and accredited courses, as specified in Groups B and C.

Note : Units with prerequisites are marked with an asterisk*. Prerequisite units must be counted in the total number of units required for achievement of the qualification. Refer to individual units for details.

Core units of competency 

Unit code 

Unit title 

MSS402051

Apply quality standards

MSMENV272

Participate in environmentally sustainable work practices

MSMWHS200

Work safely

MSMSUP210

Process and record information

Elective units of competency 

Group A: Elective units 

Unit code 

Unit title 

Prerequisites 

MEM09002B

Interpret technical drawing

MEM09003B

Prepare basic engineering drawing

*

MSMOPS363

Organise on site work

PMBPREP301

Set up and prepare for production

PMBPREP303

Set up equipment for continuous operation

PMBPREP304

Set a die

PMBPREP305

Change extrusion die and setup

PMBPROD300

Produce products

PMBPROD301

Draw wire

PMBPROD302

Bunch and strand wire

PMBPROD303

Lay up and tape cables

PMBPROD304

Wind products onto drums

PMBPROD305

Colour optical fibre

PMBPROD306

Prepare and start equipment for production

PMBPROD307

Produce calendered products

*

PMBPROD308

Take a machine out of production

PMBPROD309

Produce electroplated products

PMBPROD310

Produce injection moulded products

*

PMBPROD311

Produce blow moulded products

*

PMBPROD312

Produce continuous thermoforming products

*

PMBPROD313

Produce extruded products

*

PMBPROD314

Produce compression moulded products

PMBPROD315

Produce polyurethane foam

PMBPROD316

Produce blown film

*

PMBPROD317

Print and decorate rigid products

*

PMBPROD319

Build up rollers

PMBPROD320

Produce foam injected mouldings

PMBPROD321

Produce rotational moulded products

*

PMBPROD323

Produce powder coated products

PMBPROD324

Inspect tyres for retreading

PMBPROD325

Lay on tyre retreads

PMBPROD326

Inspect tyres

PMBPROD328

Produce sheet feed vacuum forming products

PMBPROD329

Produce polystyrene shape moulded products

*

PMBPROD330

Make moulds for formed products

PMBPROD331

Produce printed and decorated film

PMBPROD332

Produce thermally bent products

PMBPROD333

Convert plastic film

*

PMBPROD334

Produce products using twin screw extruders

PMBPROD336

Inspect heavy off-the-road tyres

PMBPROD337

Prepare heavy off-the-road tyres for repair

PMBPROD338

Repair heavy off-the-road tyres

PMBPROD339

Produce reinforced conveyor belts

*

PMBPROD340

Cure heavy off-the-road tyre repairs

PMBPROD341

Finish heavy off-the-road tyre repairs

PMBPROD343

Shut down plant area

PMBPROD347

Produce composites using hand lamination

*

PMBPROD349

Produce liquid surface coated products

*

PMBPROD352

Produce compounded materials

*

PMBPROD353

Compound materials using an internal mill blender

*

PMBPROD354

Compound materials using an open mill blender

*

PMBPROD355

Make pattern/plug for composites moulds

*

PMBPROD356

Construct moulds for composite products

*

PMBPROD357

Construct jigs and fixtures

PMBPROD358

Develop patterns

*

PMBPROD360

Produce centrifugally cast polyurethane products

*

PMBPROD362

Produce gravity cast polyurethane products

*

PMBPROD367

Remove and replace conveyor belts

PMBPROD368

Repair conveyor belt carcass

*

PMBPROD369

Repair conveyor belt covers

*

PMBPROD370

Produce injection blow moulded products

*

PMBPROD372

Produce fibre optic preforms

PMBPROD373

Draw optical fibre

PMBPROD375

Vulcanise products using an autoclave

PMBPROD376

Splice steel cord conveyor belts

*

PMBPROD377

Splice fabric ply conveyor belts

*

PMBPROD378

Splice solid woven conveyor belts

*

PMBPROD380

Produce composites using chopper gun/depositor

*

PMBPROD384

Operate multi-axis router

PMBPROD385

Program computer controlled equipment

PMBPROD387

Produce welded plastics materials

*

PMBPROD390

Produce composites using filament winding

*

PMBPROD391

Produce composites using resin infusion

*

PMBPROD392

Produce composites using pultrusion

*

PMBPROD393

Produce composites using vacuum bagging

*

PMBPROD394

Produce composites using resin transfer moulding

*

PMBPROD395

Produce composite sheet products

*

PMBPROD396

Produce composites using centrifugal casting

*

PMBPROD397

Produce composites using moulding compounds

*

PMBPROD398

Produce composites using pre-pregs

*

PMBTECH301

Use material and process knowledge to solve problems

PMBTECH302

Modify existing compounds

PMBTECH303

Make minor modifications to products

TLID3011

Conduct specialised forklift operation

A maximum of two  (2 ) units of competency may be chosen from the units in Groups A and B of PMB40116 Certificate IV in Polymer Technology (at least one of which must be from Group A).

Group B 

Unit code 

Unit title 

Prerequisites 

MEM03001B

Perform manual production assembly

MEM03006B

Set assembly stations

*

MEM11005B

Pick and process order

MEM11006B

Perform production packaging

MEM11007B

Administer inventory procedures

MEM12023A

Perform engineering measurements

MEM15001B

Perform basic statistical quality control

MEM15003B

Use improvement processes in team activities

*

MEM15004B

Perform inspection

MSS402002

Sustain process improvements

MSS402020

Apply quick changeover procedures

MSS402050

Monitor process capability

MSS402060

Use planning software systems in operations

MSS402080

Undertake root cause analysis

MSMWHS300

Facilitate the implementation of WHS for a work group

*

MSMPER300

Issue work permits

*

MSMSUP300

Identify and apply process improvements

*

MSMSUP301

Apply HACCP to the workplace

MSMSUP303

Identify equipment faults

MSMSUP309

Maintain and organise workplace records

MSMSUP310

Contribute to the development of workplace documentation

MSMSUP330

Develop and adjust a production schedule

MSMSUP382

Provide coaching/mentoring in the workplace

MSMSUP383

Facilitate a team

MSMSUP390

Use structured problem solving tools

PMBWASTE302

Coordinate waste disposal

PMBWELD301

Butt weld polyethylene plastic pipelines

PMBWELD302

Electrofusion weld polyethylene pipelines

PMBWELD303

Install polyethylene (non-pressure) drainage pipelines

PMBWELD304

Design polyethylene (non-pressure) drainage pipelines

*

PMBWELD305

Install polyethylene plastic pressure pipelines

PMBWELD306

Design polyethylene plastic pressure pipelines

*

PMBWELD307

Install high temperature plastic pressure pipelines

PMBWELD308

Install PVC plastic pressure pipelines

PMBWELD309

Weld plastic using extrusion techniques

PMBWELD310

Design PVC plastic pressure pipelines

*

PMBWELD311

Design high temperature plastic pressure pipelines

*

MSL973001

Perform basic tests

TAEDEL301

Provide work skill instruction

Up to two  (2 ) relevant units may be chosen from this Training Package, other endorsed Training Packages and accredited courses, where those units are packaged in a Certificate III.

Group C 

Unit code 

Unit title 

Prerequisite 

FWPCOT2238

Cut materials with a hand-held chainsaw

HLTAID003

Provide first aid

LMTGN2008B

Coordinate work of team/section

MEM13003B

Work safely with industrial chemicals

MEM16006A

Organise and communicate information

MEM16007A

Work with others in a manufacturing, engineering or related environment

MEM16008A

Interact with computer technology

MEM18001C

Use hand tools

MEM18002B

Use power tools/hand held operations

MSS402021

Apply Just in Time procedures

MSS402030

Apply cost factors to work practices

MSS402040

Apply 5S procedures

MSMWHS100

Follow WHS procedures

MSMWHS110

Follow emergency response procedures

MSMWHS205

Control minor incidents

MSMWHS210

Undertake first response to non-fire incidents

MSMWHS212

Undertake first response to fire incidents

MSMWHS216

Operate breathing apparatus

MSMWHS217

Gas test atmospheres

MSMOPS100

Use equipment

MSMOPS101

Make measurements

MSMOPS102

Perform tasks to support production

MSMOPS200

Operate equipment

MSMOPS212

Use organisations computers or data systems

MSMOPS244

Lay out and cut materials

MSMPER200

Work in accordance with an issued permit

MSMPER201

Monitor and control work permits

MSMPER205

Enter confined space

*

MSMSUP100

Apply workplace context to own job

MSMSUP101

Clean workplace or equipment

MSMSUP102

Communicate in the workplace

MSMSUP106

Work in a team

MSMENV172

Identify and minimise environmental hazards

MSMSUP200

Achieve work outcomes

MSMSUP204

Pack products or materials

MSMSUP205

Transfer loads

MSMSUP230

Monitor process operations

MSMSUP240

Undertake minor maintenance

MSMSUP273

Handle goods

MSMSUP280

Manage conflict at work

MSMSUP291

Participate in continuous improvement

MSMSUP292

Sample and test materials and product

PMBFIN201

Finish products and components

PMBFIN202

Fit attachments to products

PMBFIN203

Repair product imperfections

PMBFIN205

Hand decorate products

PMBHAN103

Shift materials safely by hand

PMBHAN208

Store products

PMBPREP201

Prepare moulds for composites production

PMBPREP205

Assemble materials and equipment for production

PMBPREP206

Prepare materials to formulae

PMBPROD206

Operate ancillary equipment

PMBPROD207

Operate calender

PMBPROD209

Operate cable winding equipment

PMBPROD210

Operate injection moulding equipment

PMBPROD211

Operate blow moulding equipment

PMBPROD212

Operate thermoforming equipment

PMBPROD213

Operate extruders

PMBPROD216

Operate blown film equipment

PMBPROD217

Operate printing equipment

PMBPROD221

Operate rotational moulding equipment

PMBPROD229

Operate polystyrene shape moulding equipment

PMBPROD233

Operate film conversion equipment

PMBPROD235

Use materials and process knowledge to complete work operations

PMBPROD236

Operate hand held air/power equipment for production processes

PMBPROD237

Splice cables

PMBPROD238

Perform creel rack operations

PMBPROD239

Build reinforced conveyor belts

PMBPROD240

Cut materials

PMBPROD241

Lay up rubber lining or lag pulleys

PMBPROD242

Bond polymers to surfaces

PMBPROD245

Fabricate materials

PMBPROD246

Hand mix materials

PMBPROD247

Hand lay up composites

PMBPROD248

Prepare surfaces for coating

PMBPROD249

Apply liquid surface coatings

PMBPROD251

Apply gel coat or other polymer surface finish

PMBPROD252

Operate compounding equipment

PMBPROD253

Operate an internal mill blender

PMBPROD254

Operate an open mill blender

PMBPROD255

Operate mixing equipment

PMBPROD259

Operate granulating equipment

PMBPROD261

Operate continuous vulcanising equipment

PMBPROD262

Operate tyre curing equipment

PMBPROD263

Operate retread curing equipment

PMBPROD265

Operate portable vulcanising equipment

PMBPROD266

Prepare tyre casings for retreading

PMBPROD267

Operate steel cutting equipment

PMBPROD268

Operate bead coiling equipment

PMBPROD270

Operate injection blow moulding equipment

PMBPROD280

Operate resin-glass depositor equipment

PMBPROD281

Finish composite products

PMBPROD282

Assemble mould

PMBPROD283

Demould product

PMBPROD284

Operate open flame moulding equipment

PMBPROD285

Operate computer controlled equipment

PMBPROD287

Weld plastics materials

PMBPROD290

Operate filament winding equipment

PMBPROD291

Operate resin infusion moulding equipment

PMBPROD292

Operate pultrusion equipment

PMBPROD293

Operate vacuum bagging equipment

PMBPROD294

Operate resin transfer moulding equipment

PMBPROD295

Operate composite sheeting equipment

PMBPROD296

Operate centrifugal casting equipment

PMBPROD297

Operate equipment using moulding compounds

PMBPROD298

Operate equipment using pre-preg material

PMBWASTE101

Collect waste for recycling or safe disposal

RIIRIS201D

Conduct local risk control

TLID2010

Operate a forklift

Up to four  (4 ) relevant units of competency may be chosen from this Training Package, other endorsed Training Packages and accredited courses, where those units are packaged in Certificates II or III.

Qualification Mapping Information

Release 1. Supersedes and is equivalent to PMB30107 Certificate III in Polymer Processing.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=932aacef-7947-4c80-acc6-593719fe4090

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.