Modification History
Release 1. Supersedes and is equivalent to PMB20107 Certificate II in Polymer Processing.
Qualification Description
The PMB20116 Certificate II in Polymer Processing is intended for competent operators who operate production equipment or undertake similar roles to directly produce products.
The operator will be able to operate production equipment within defined specifications and procedures and carry out a range of support functions. The operator will be able to apply technical and procedural knowledge to a defined range of situations and activities.
The operator will be able to solve predictable problems by applying known solutions and will report non-routine problems to appropriate personnel.
This qualification applies to the production of a wide range of polymer products and components ranging from consumer products to components to be included in other commercial, industrial or consumer products. Products may be made from a wide range of natural and synthetic polymers covering thermoplastics as well as thermosetting polymers. Production may be long runs of standard products, short runs or ‘one offs’ of specialised products.
For people who do not directly produce product but work in production support roles see MSM20116 Certificate II in Process Manufacturing.
For people who require a more generalist qualification covering the application of good manufacturing practice and lean principles see MSS20316 Certificate II in Competitive Systems and Practices.
There are no specific licenses that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some jurisdictions. Local regulations should be checked for details.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
To be awarded the PMB20116 Certificate II in Polymer Processing competency must be achieved in fourteen (14 ) units of competency:
Up to four (4 ) elective units can be chosen from other qualifications in this Training Package, other endorsed Training Packages and accredited courses, as specified in Group B. Note : Units with prerequisites are marked with an asterisk*. Prerequisite units must be counted in the total number of units required for achievement of the qualification. Refer to individual units for details. |
||
Core units of competency |
||
Unit code |
Unit title |
|
MSMENV272 |
Participate in environmentally sustainable work practices |
|
MSMWHS200 |
Work safely |
|
MSMSUP210 |
Process and record information |
|
Elective units of competency Group A |
||
Unit code |
Unit title |
Prerequisites |
FWPCOT2238 |
Cut materials with a hand-held chainsaw |
|
MSMOPS200 |
Operate equipment |
|
MSMOPS212 |
Use organisation computers or data systems |
|
MSMOPS244 |
Layout and cut materials |
|
PMBFIN201 |
Finish products and components |
|
PMBFIN202 |
Fit attachments to products |
|
PMBFIN203 |
Repair product imperfections |
|
PMBFIN205 |
Hand decorate products |
|
PMBPREP201 |
Prepare moulds for composites production |
|
PMBPREP205 |
Assemble materials and equipment for production |
|
PMBPREP206 |
Prepare materials to formulae |
|
PMBPROD206 |
Operate ancillary equipment |
|
PMBPROD207 |
Operate calender |
|
PMBPROD209 |
Operate cable winding equipment |
|
PMBPROD210 |
Operate injection moulding equipment |
|
PMBPROD211 |
Operate blow moulding equipment |
|
PMBPROD212 |
Operate thermoforming equipment |
|
PMBPROD213 |
Operate extruders |
|
PMBPROD216 |
Operate blown film equipment |
|
PMBPROD217 |
Operate printing equipment |
|
PMBPROD221 |
Operate rotational moulding equipment |
|
PMBPROD229 |
Operate polystyrene shape moulding equipment |
|
PMBPROD233 |
Operate film conversion equipment |
|
PMBPROD235 |
Use materials and process knowledge to complete work operations |
|
PMBPROD236 |
Operate hand held air/power equipment for production processes |
|
PMBPROD237 |
Splice cables |
|
PMBPROD238 |
Perform creel rack operations |
|
PMBPROD239 |
Build reinforced conveyor belts |
|
PMBPROD240 |
Cut materials |
|
PMBPROD241 |
Lay up rubber lining or lag pulleys |
|
PMBPROD242 |
Bond polymers to surfaces |
|
PMBPROD245 |
Fabricate materials |
|
PMBPROD246 |
Hand mix materials |
|
PMBPROD247 |
Hand lay up composites |
|
PMBPROD248 |
Prepare surfaces for coating |
|
PMBPROD249 |
Apply liquid surface coatings |
|
PMBPROD251 |
Apply gel coat or other polymer surface finish |
|
PMBPROD252 |
Operate compounding equipment |
|
PMBPROD253 |
Operate an internal mill blender |
|
PMBPROD254 |
Operate an open mill blender |
|
PMBPROD255 |
Operate mixing equipment |
|
PMBPROD259 |
Operate granulating equipment |
|
PMBPROD261 |
Operate continuous vulcanising equipment |
|
PMBPROD262 |
Operate tyre curing equipment |
|
PMBPROD263 |
Operate retread curing equipment |
|
PMBPROD265 |
Operate portable vulcanising equipment |
|
PMBPROD266 |
Prepare tyre casings for retreading |
|
PMBPROD267 |
Operate steel cutting equipment |
|
PMBPROD268 |
Operate bead coiling equipment |
|
PMBPROD270 |
Operate injection blow moulding equipment |
|
PMBPROD280 |
Operate resin-glass depositor equipment |
|
PMBPROD281 |
Finish composite products |
|
PMBPROD282 |
Assemble mould |
|
PMBPROD283 |
Demould product |
|
PMBPROD284 |
Operate open flame moulding equipment |
|
PMBPROD285 |
Operate computer controlled equipment |
|
PMBPROD287 |
Weld plastics materials |
|
PMBPROD290 |
Operate filament winding equipment |
|
PMBPROD291 |
Operate resin infusion moulding equipment |
|
PMBPROD292 |
Operate pultrusion equipment |
|
PMBPROD293 |
Operate vacuum bagging equipment |
|
PMBPROD294 |
Operate resin transfer moulding equipment |
|
PMBPROD295 |
Operate composite sheeting equipment |
|
PMBPROD296 |
Operate centrifugal casting equipment |
|
PMBPROD297 |
Operate equipment using moulding compounds |
|
PMBPROD298 |
Operate equipment using pre-preg material |
|
A maximum of two (2 ) units of competency may be chosen from the units in Groups A and B of PMB30116 Certificate III in Polymer Processing (at least one of which must be from Group A). |
||
Group B |
||
Unit code |
Unit title |
Prerequisites |
HLTAID003 |
Provide first aid |
|
LMTGN2008B |
Coordinate work of team/section |
|
MEM13003B |
Work safely with industrial chemicals |
|
MEM16006A |
Organise and communicate information |
|
MEM16007A |
Work with others in a manufacturing, engineering or related environment |
|
MEM16008A |
Interact with computing technology |
|
MEM18001C |
Use hand tools |
|
MEM18002B |
Use power tools/hand held operations |
|
MSS402002 |
Sustain process improvements |
|
MSS402020 |
Apply quick changeover procedures |
|
MSS402021 |
Apply Just in Time procedures |
|
MSS402030 |
Apply cost factors to work practices |
|
MSS402040 |
Apply 5S procedures |
|
MSS402050 |
Monitor process capability |
|
MSS402051 |
Apply quality standards |
|
MSS402060 |
Use planning software systems in operations |
|
MSS402080 |
Undertake root cause analysis |
|
MSMWHS100 |
Follow WHS procedures |
|
MSMWHS110 |
Follow emergency response procedures |
|
MSMWHS205 |
Control minor incidents |
|
MSMWHS210 |
Undertake first response to non-fire incidents |
|
MSMWHS212 |
Undertake first response to fire incidents |
|
MSMWHS216 |
Operate breathing apparatus |
|
MSMWHS217 |
Gas test atmospheres |
|
MSMOPS100 |
Use equipment |
|
MSMOPS101 |
Make measurements |
|
MSMOPS102 |
Perform tasks to support production |
|
MSMPER200 |
Work in accordance with an issued permit |
|
MSMPER201 |
Monitor and control work permits |
|
MSMPER205 |
Enter confined space |
* |
MSMSUP100 |
Apply workplace context to own job |
|
MSMSUP101 |
Clean workplace or equipment |
|
MSMSUP102 |
Communicate in the workplace |
|
MSMSUP106 |
Work in a team |
|
MSMENV172 |
Identify and minimise environmental hazards |
|
MSMSUP200 |
Achieve work outcomes |
|
MSMSUP204 |
Pack products or materials |
|
MSMSUP205 |
Transfer loads |
|
MSMSUP230 |
Monitor process operations |
|
MSMSUP240 |
Undertake minor maintenance |
|
MSMSUP273 |
Handle goods |
|
MSMSUP280 |
Manage conflict at work |
|
MSMSUP291 |
Participate in continuous improvement |
|
MSMSUP292 |
Sample and test materials and product |
|
PMBHAN103 |
Shift materials safely by hand |
|
PMBHAN208 |
Store products |
|
PMBWASTE101 |
Collect waste for recycling or safe disposal |
|
RIIRIS201D |
Conduct local risk control |
|
TLID2010 |
Operate a forklift |
|
Up to four (4 ) relevant units of competency may be chosen from this Training Package, other endorsed Training Packages and accredited courses, where those units are available for inclusion at Certificates II or III. |
Qualification Mapping Information
Release 1. Supersedes and is equivalent to PMB20107 Certificate II in Polymer Processing.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=932aacef-7947-4c80-acc6-593719fe4090