^

 
 

Unit of competency details

MTMP2145C - Separate and tie runners (Release 1)

Summary

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by and equivalent to AMPA2117 - Separate and tie runnersThis unit is equivalent to MTMP2145C Separate and tie runners 03/Aug/2016
Supersedes MTMP2145B - Separate and tie runners 21/Jul/2011

Release Status:
Current
Releases:
ReleaseRelease date
1 1 (this release) 22/Jul/2011

Classifications

SchemeCodeClassification value
ASCED Module/Unit of Competency Field of Education Identifier 110105 Butchery 

Classification history

SchemeCodeClassification valueStart dateEnd date
ASCED Module/Unit of Competency Field of Education Identifier 110105 Butchery 07/Aug/2012 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Not applicable.

Unit Descriptor

Unit descriptor 

This unit covers the skills and knowledge required to separate runners from the viscera, inspect for defects or contamination and tie the runners to avoid spillage of contents.

Application of the Unit

Application of the unit 

This unit is applicable to workers on the slaughter floor.

Licensing/Regulatory Information

Not Applicable

Pre-Requisites

Prerequisite units 

MTMPSR203A

Sharpen knives

Employability Skills Information

Employability skills 

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT 

PERFORMANCE CRITERIA 

1. Separate and tie runners

1.1. Runners are separated and tied to prevent contamination and to meet workplace  and OH &S requirements .

1.2. Runners are inspected for defects or contamination according to workplace requirements.

1.3. Runners are placed in appropriate chutes according to workplace requirements.

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE 

This section describes the skills and knowledge required for this unit.

Required skills 

Ability to:

  • handle runners in such a way as to avoid bile, ingesta, excreta or content contamination
  • identify condemnation marks on runners
  • dispose of inedible runners in appropriate bins or chutes
  • work effectively as an individual and as part of a team
  • apply relevant regulatory requirements 
  • take action to improve own work performance as a result of self-evaluation, feedback from others, or in response to changed work practices or technology

Required knowledge 

Knowledge of:

  • possible sources of contamination
  • uses of end runners
  • workplace, OH&S and Quality Assurance (QA) requirements related to separating and tying runners
  • relevant regulatory requirements

Evidence Guide

EVIDENCE GUIDE 

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment 

The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.

These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.

Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.

All assessment must be conducted against Australian meat industry standards and regulations.

Critical aspects for assessment and evidence required to demonstrate competency in this unit 

Competency must be demonstrated at normal chain speed.

Context of , and specific resources for assessment 

Assessment must occur in the workplace under normal production conditions.

Method of assessment 

Recommended methods of assessment include:

  • quiz of underpinning knowledge
  • workplace demonstration
  • workplace referee or third-party report of performance over time.

Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.

Guidance information for assessment 

A current list of resources for this Unit of Competency is available from MINTRAC www .mintrac .com .au  or telephone 1800 817 462.

Range Statement

RANGE STATEMENT 

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Workplace  requirements may include:

  • enterprise-specific requirements
  • OH&S requirements
  • QA requirements
  • Standard Operating Procedures (SOPs)
  • the ability to perform the task to production requirements
  • work instructions.

OH &S requirements  may include:

  • enterprise OH&S policies, procedures and programs
  • OH&S legal requirements
  • Personal Protective Equipment (PPE) which may include:
  • coats and aprons
  • ear plugs or muffs
  • eye and facial protection
  • head-wear
  • lifting assistance
  • mesh aprons
  • protective boot covers
  • protective hand and arm covering
  • protective head and hair covering
  • uniforms
  • waterproof clothing
  • work, safety or waterproof footwear
  • requirements set out in standards and codes of practice.

Regulatory requirements  may include:

  • Export Control Act
  • hygiene and sanitation requirements
  • relevant regulations
  • requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption.

Unit Sector(s)

Unit sector 

Co-requisite units

Co-requisite units 

Competency field

Competency field