Modification History
Release 1. Supersedes and is equivalent to MSA40510 Certificate IV in Recreational Vehicles.
Qualification Description
The MSM41015 Certificate IV in Recreational Vehicles has been developed as a post-trade level qualification. People with this qualification would be expected to lead work teams and provide supervision of people undertaking the manufacture, service and repair of recreational vehicles, including:
- motor homes
- caravans
- camper trailers
- slide-ons
- fifth wheelers
to meet Australian requirements, such as road worthiness and the Australian Design Rule (ADR). They will provide technical leadership as well as undertake some tasks themselves.
They may work in a service and repair facility or a manufacturer's factory. Work may include building a new recreational vehicle, repairs for an insurance claim or other repairs, modifying an existing recreational vehicle or undertaking routine servicing.
They may work in a large manufacturing organisation or a small workshop.
There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements depending on the work context. Local regulations should be checked for details.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
|
To be awarded the MSM41015 Certificate IV in Recreational Vehicles, competency must be achieved in thirty-two (32) units of competency:
Note: Up to seven (7) elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, as specified in Groups A, B, C and D. Note: Where prerequisite units are identified they must be counted in the total number of units required for achievement of the qualification. |
||
|
Core units Complete all three (3) units from the following list. |
||
|
Unit code |
Unit title |
|
|
MSMENV272 |
Participate in environmentally sustainable work practices |
|
|
MSMSUP102 |
Communicate in the workplace |
|
|
MSMWHS200 |
Work safely |
|
|
ELECTIVE UNITS Group A Elective units Select a minimum of two (2) units from the following list. |
||
|
Unit code |
Unit title |
Prerequisites |
|
AURATA3005 |
Estimate complex jobs |
|
|
AURANN4001 |
Prepare a vehicle repair quotation |
|
|
AURV365356A |
Read and interpret vehicle body repair estimation/quotation |
|
|
AURVTN4032 |
Determine vehicle body damage and recommend repair procedures |
|
|
MEM03006B |
Set assembly stations |
MEM03001B MEM18001C MEM03003B MEM18002B MEM03004B |
|
MEM16012A |
Interpret technical specifications and manuals |
|
|
MSMRVS401 |
Assess and quote to service a recreational vehicle |
|
|
Up to one (1) relevant Group A elective unit of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, where it is available for inclusion at Certificate IV qualification. |
||
|
Group B - Elective units |
||
|
Unit code |
Unit title |
Prerequisites |
|
AUMGTT001 |
Apply trim to vehicle components |
|
|
AURETR2015 |
Inspect and service batteries |
|
|
AURETR2012 |
Test and repair basic electrical circuits |
|
|
AURETB3001 |
Repair electric braking systems |
|
|
AURTTB2001 |
Inspect and service braking systems |
|
|
AURTTD2004 |
Inspect and service suspension systems |
|
|
AURTTJ2002 |
Remove and refit wheel hubs and associated brake components |
|
|
AURTTA3017 |
Carry out vehicle safety and roadworthy inspection |
|
|
AURVTS3004 |
Repair fibreglass and composite material components |
|
|
AURTTY3001 |
Repair chassis, frame and associated components |
|
|
AURVTT3015 |
Fabricate canvas products |
|
|
AURVTT3016 |
Fabricate frame structures |
|
|
AURVTT3019 |
Fabricate and install canopies and curtains |
|
|
CPCPCM2043A |
Carry out WHS requirements |
|
|
CPCPGS3046A |
Install LPG systems in caravans, mobile homes and mobile workplaces |
CPCPCM2043A |
|
MEM03001B |
Perform manual production assembly |
|
|
MEM05005B |
Carry out mechanical cutting |
MEM12023A MEM18001C |
|
MEM05012C |
Perform routine manual metal arc welding |
|
|
MEM05050B |
Perform routine gas metal arc welding |
|
|
MEM07024B |
Operate and monitor machine/process |
|
|
MEM07028B |
Operate computer controlled machines/ processes |
MEM07024B |
|
MEM10002B |
Terminate and connect electrical wiring |
MEM09002B MEM12002B MEM18001C |
|
MEM12002B |
Perform electrical/electronic measurement |
|
|
MEM12023A |
Perform engineering measurements |
|
|
MEM18038B |
Maintain wheels and tyres |
MEM18001 |
|
MEM18045B |
Fault find/repair electrical equipment/components up to 250 volts single phase supply |
MEM09002B MEM10002B MEM12002B MEM12023A MEM18001C MEM18002B |
|
MSMOPS101 |
Make measurements |
|
|
MSMRV310 |
Fit recreational vehicle floor |
|
|
MSMRV311 |
Fit furniture in a recreational vehicle |
|
|
MSMRV312 |
Fit water systems in a recreational vehicle |
|
|
MSMRV313 |
Fit 12 V cable systems in a recreational vehicle |
|
|
MSMRV314 |
Construct and fit roof to a recreational vehicle |
|
|
MSMRV315 |
Construct and fit slide out in a recreational vehicle |
|
|
MSMRV316 |
Fit appliances in a recreational vehicle |
|
|
MSMRV317 |
Install solar equipment on a recreational vehicle |
|
|
MSMRV318 |
Fit cladding to a recreational vehicle |
|
|
MSMRV319 |
Fit front and rear moulds to a recreational vehicle |
|
|
MSMRV320 |
Fit windows and doors to a recreational vehicle |
|
|
MSMRV321 |
Fit required external items to a recreational vehicle |
|
|
MSMRV322 |
Fit required external electrical components to a recreational vehicle |
|
|
MSMRV323 |
Fit required internal items to a recreational vehicle |
|
|
MSMRV324 |
Conduct final quality inspection for a recreational vehicle |
|
|
MSMRV325 |
Fabricate a chassis and suspension for a recreational vehicle |
|
|
MSMRV365 |
Remove and refit body moulding |
|
|
MSMRV366 |
Fit transfers and decals to a recreational vehicle |
|
|
MSMRVS202 |
Repair/service LPG systems in a recreational vehicle |
|
|
Up to two (2) relevant Group B elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, where they are available for inclusion at Certificate III qualification. |
||
|
Group C Elective units |
||
|
Unit code |
Unit title |
Prerequisites |
|
MEM13002B |
Undertake occupational health and safety activities in the workplace |
|
|
MEM13010A |
Supervise occupational health and safety in an industrial work environment |
MEM13002B |
|
MEM14001B |
Schedule material deliveries |
|
|
MEM14002B |
Undertake basic process planning |
|
|
MEM14003B |
Undertake basic production scheduling |
|
|
MEM16002C |
Conduct formal interviews and negotiations |
|
|
MEM16006A |
Organise and communicate information |
|
|
MEM30013A |
Assist in the preparation of a basic workplace layout |
|
|
MSMENV472 |
Implement and monitor environmentally sustainable work practices |
|
|
MSMSUP200 |
Achieve work outcomes |
|
|
MSMSUP383 |
Facilitate a team |
|
|
MSMSUP390 |
Use structured problem-solving tools |
|
|
MSS402002A |
Sustain process improvements |
|
|
MSS402081A |
Contribute to the application of a proactive maintenance strategy |
|
|
MSS403002A |
Ensure process improvements are sustained |
|
|
MSS403011A |
Facilitate implementation of competitive systems and practices |
|
|
MSS403021A |
Facilitate a Just in Time system |
|
|
MSS403040A |
Facilitate and improve implementation of 5S |
|
|
MSS403041A |
Facilitate breakthrough improvements |
|
|
MSS403051A |
Mistake proof an operational process |
|
|
MSS404082A |
Assist in implementing a proactive maintenance strategy |
|
|
Up to two (2) relevant Group C elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, where they are available for inclusion at Certificate IV qualification. |
||
|
Group D Elective units |
||
|
Unit code |
Unit title |
Prerequisites |
|
MEM09002B |
Interpret technical drawing |
|
|
MEM11010B |
Operate mobile load shifting equipment |
|
|
MEM14004A |
Plan to undertake a routine task |
|
|
MEM15024A |
Apply quality procedures |
|
|
MEM18001C |
Use hand tools |
|
|
MEM18002B |
Use power tools/hand held operations |
|
|
MSMOPS102 |
Perform tasks to support production |
|
|
MSMOPS200 |
Operate equipment |
|
|
MSMOPS212 |
Use organisation computers or data systems |
|
|
MSMPER200 |
Work in accordance with an issued permit |
|
|
MSMRVT201 |
Apply technical knowledge of recreational vehicle manufacturing to work activities |
|
|
MSMSUP100 |
Apply workplace context to own job |
|
|
MSMSUP101 |
Clean workplace or equipment |
|
|
MSMSUP106 |
Work in a team |
|
|
MSMSUP240 |
Undertake minor maintenance |
|
|
MSMSUP273 |
Handle goods |
|
|
MSMSUP280 |
Manage conflict at work |
|
|
MSMSUP291 |
Participate in continuous improvement |
|
|
MSMWHS110 |
Follow emergency response procedures |
|
|
MSMWHS205 |
Control minor incidents |
|
|
MSS402021A |
Apply Just in Time procedures |
|
|
MSS402040A |
Apply 5S procedures |
|
|
MSS402080A |
Undertake root cause analysis |
|
|
PMBHAN103C |
Shift materials safely by hand |
|
|
TLID2010 |
Operate a forklift |
|
|
Up to two (2) relevant Group D elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, where they are available for inclusion at Certificate II or III qualification. |
||
Qualification Mapping Information
Release 1. Supersedes and is equivalent to MSA40510 Certificate IV in Recreational Vehicles.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=d1287d36-dff4-4e9f-ad2c-9d6270054027
