Modification History
Release 7. Four low use units removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers' objectives. Equivalent.
Release 6. Two new electives added to Elective Group A. Equivalent.
Release 5. Imported units updated to current versions. Equivalent.
Release 4. Imported units updated to current versions. Equivalent.
Release 3. Imported units updated to current versions. Equivalent.
Release 2. Imported units updated to current versions. Equivalent.
Release 1. Supersedes and is equivalent to MSA30510 Certificate III in Recreational Vehicle Service and Repair.
Qualification Description
The MSM31015 Certificate III in Recreational Vehicle Service and Repair has been developed as a trade-level qualification. People with this qualification would be expected to work under supervision servicing and repairing recreational vehicles, including:
- motor homes
- caravans
- camper trailers
- slide-ons
- fifth wheelers
to meet Australian requirements, such as road worthiness and the Australian Design Rule (ADR).
They may work in a service and repair facility or a manufacturer's factory undertaking warranty work. Work may be for an insurance claim, modifying an existing recreational vehicle or undertaking routine servicing.
There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements depending on the work context. Local regulations should be checked for details.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
|
To be awarded the MSM31015 Certificate III in Recreational Vehicle Service and Repair, competency must be achieved in twenty-two (22) units of competency:
Note: Up to four (4) elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, as specified in Groups A and B. Note : Where prerequisite units are identified they must be counted in the total number of units required for achievement of the qualification. |
||
|
Core units Complete all three (3) units from the following list. |
||
|
Unit code |
Unit title |
|
|
MSMENV272 |
Participate in environmentally sustainable work practices |
|
|
MSMSUP102 |
Communicate in the workplace |
|
|
MSMWHS200 |
Work safely |
|
|
ELECTIVE UNITS Group A Elective units Select a minimum of thirteen (13) units from the following list. |
||
|
Unit code |
Unit title |
Prerequisites |
|
AUMGTT001 |
Apply trim to vehicle components |
|
|
AURETR015 |
Inspect, test and service batteries |
|
|
AURETR012 |
Test and repair basic electrical circuits |
|
|
AURETB001 |
Diagnose and repair electric braking systems |
|
|
AURTTA017 |
Carry out vehicle safety inspections |
|
|
AURTTB001 |
Inspect and service braking systems |
|
|
AURTTD004 |
Inspect and service suspension systems |
|
|
AURTTJ012 |
Remove, inspect and refit wheel hubs and associated brake components |
|
|
AURTTA017 |
Carry out vehicle safety inspections |
|
|
AURVTS004 |
Repair vehicle composite material components |
|
|
AURVTG011 |
Install side vehicle windows |
|
|
AURTTY001 |
Repair vehicle chassis, frame and associated components |
|
|
AURVTT015 |
Fabricate and install canvas products for automotive and marine components |
|
|
AURVTT019 |
Fabricate and install automotive and marine frames, canopies and side curtains |
|
|
CPCPCM2043A |
Carry out WHS requirements |
|
|
CPCPGS3046A |
Install LPG systems in caravans, mobile homes and mobile workplaces |
CPCPCM2043A |
|
MEM05005B |
Carry out mechanical cutting |
MEM12023A MEM18001C |
|
MEM05012C |
Perform routine manual metal arc welding |
|
|
MEM05050B |
Perform routine gas metal arc welding |
|
|
MEM09002B |
Interpret technical drawing |
|
|
MEM10002B |
Terminate and connect electrical wiring |
MEM09002B MEM12002B MEM18001C |
|
MEM12002B |
Perform electrical/electronic measurement |
|
|
MEM12023A |
Perform engineering measurements |
|
|
MEM18038B |
Maintain wheels and tyres |
MEM18001 |
|
MEM18045B |
Fault find/repair electrical equipment/components up to 250 volts single phase supply |
MEM09002B MEM10002B MEM12002B MEM12023A MEM18001C MEM18002B |
|
MSMOPS101 |
Make measurements |
|
|
MSMRV350 |
Remove and replace a recreational vehicle roof |
|
|
MSMRV352 |
Remove and replace a recreational vehicle sidewall cladding |
|
|
MSMRV356 |
Remove and replace gas struts and roof lifting equipment on a recreational vehicle |
|
|
MSMRV357 |
Remove and replace external components of a recreational vehicle |
|
|
MSMRV358 |
Modify the body of a recreational vehicle |
|
|
MSMRV359 |
Install additional appliances in a recreational vehicle |
|
|
MSMRV360 |
Service camper wind up systems |
|
|
MSMRV361 |
Repair dry rot in a recreational vehicle |
|
|
MSMRV362 |
Install and repair battery systems in a recreational vehicle |
|
|
MSMRV363 |
Complete pre-delivery check of a recreational vehicle |
|
|
MSMRV364 |
Hand over a recreational vehicle to a customer |
|
|
MSMRV365 |
Remove and refit body moulding |
|
|
MSMRV366 |
Fit transfers and decals to a recreational vehicle |
|
|
MSMRVS202 |
Repair/service LPG systems in a recreational vehicle |
|
|
MSMRV367 |
Fabricate frame structures |
|
|
MSMRV368 |
Install frame structures |
|
|
Up to two (2) relevant Group A elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, where they are available for inclusion at Certificate III qualification. |
||
|
Group B Elective units Select a maximum of six (6) units from the following list. |
||
|
Unit code |
Unit title |
Prerequisites |
|
MEM11010B |
Operate mobile load shifting equipment |
|
|
MEM11011B |
Undertake manual handling |
|
|
MEM14004A |
Plan to undertake a routine task |
|
|
MEM15024A |
Apply quality procedures |
|
|
MEM18001C |
Use hand tools |
|
|
MEM18002B |
Use power tools/hand held operations |
|
|
MSMOPS212 |
Use organisation computers or data systems |
|
|
MSMPER200 |
Work in accordance with an issued permit |
|
|
MSMRVG201 |
Tow a recreational vehicle safely |
|
|
MSMRVT201 |
Apply technical knowledge of recreational vehicle manufacturing to work activities |
|
|
MSMSUP100 |
Apply workplace context to own job |
|
|
MSMSUP101 |
Clean workplace or equipment |
|
|
MSMSUP106 |
Work in a team |
|
|
MSMSUP240 |
Undertake minor maintenance |
|
|
MSMSUP280 |
Manage conflict at work |
|
|
MSMSUP291 |
Participate in continuous improvement |
|
|
MSMWHS110 |
Follow emergency response procedures |
|
|
MSMWHS205 |
Control minor incidents |
|
|
MSS402040 |
Apply 5S procedures |
|
|
MSS402080 |
Undertake root cause analysis |
|
|
PMBHAN103 |
Shift materials safely by hand |
|
|
SIRXPDK001 |
Advise on products and services |
|
|
TLID2010 |
Operate a forklift |
|
|
Up to two (2) relevant Group B elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, where they are available for inclusion at Certificate II or III qualification. |
||
Qualification Mapping Information
Release 7. Four low use units removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers' objectives. Equivalent.
Release 6. Two new electives added to Elective Group A. Equivalent.
Release 5. Imported units updated to current versions. Equivalent.
Release 4. Imported units updated to current versions. Equivalent.
Release 3. Imported units updated to current versions. Equivalent.
Release 2. Imported units updated to current versions. Equivalent.
Release 1. Supersedes and is equivalent to MSA30510 Certificate III in Recreational Vehicle Service and Repair.
Links
Companion Volume Implementation Guides are available at VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=d1287d36-dff4-4e9f-ad2c-9d6270054027
