Modification History
Release 4. Modification - MSMWJ units added to Group D electives.
Release 3. Two low use units removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers' objectives. Equivalent.
Release 2. Correction of typographical error in Group A Electives and inclusion missing text for Group E - Balance of units. Imported units updated to current versions. Equivalent.
Release 1. Supersedes and is equivalent to MSA30309 Certificate III in Surface Preparation and Coating Application. Units updated.
Qualification Description
The MSM30216 Certificate III in Surface Preparation and Coating Application provides the trade-level competencies required to perform the wide range of surface preparation and protective coating application operations that occur across a range of heavy industry, ships and infrastructure.
The surfaces being prepared are typically metal (usually ferrous) and may be structural or have other mechanical requirements. The protective coatings may be liquid or solid. The applied coating may, or may not be the final coat and its purpose is protective, not decorative.
People with this qualification would be expected to work under routine supervision only, preparing surfaces and/or applying protective coatings in accordance with a provided technical specification. They would be expected to recognise situations where the intended approach was not appropriate/not working and take appropriate action to ensure the final result is satisfactory.
People with this qualification may be expected to undertake some combination of:
- abrasively blast clean surfaces to Australian Standard requirements and in accordance with the specification
- prepare surfaces for coating as required by the specification
- apply liquid protective surface coatings
- apply solid polymer surface coatings (this is usually a specialised area).
They may work in a manufacturer's factory or they may work as contractors on the site of the plant/ship/infrastructure.
This work may be undertaken:
- in a factory environment
- in an onsite, outdoors environment
- inside a vessel or other confined space
- outside a vessel or structure
- at heights
- some combination of these.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
|
To be awarded the MSM30216 Certificate III in Surface Preparation and Coating Application competency must be achieved in thirty-one (31) units of competency:
Note : A total of five (5) elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, as specified below. These comprise:
Note : Where prerequisite units are identified they must be counted in the total number of units required for achievement of the qualification. |
||
|
Core units |
||
|
Unit code |
Unit title |
|
|
MEM12023A |
Perform engineering measurements |
|
|
MEM12024A |
Perform computations |
|
|
MEM14004A |
Plan to undertake a routine task |
|
|
MEM14005A |
Plan a complete activity |
|
|
MEM15002A |
Apply quality systems |
|
|
MEM15024A |
Apply quality procedures |
|
|
MEM16006A |
Organise and communicate information |
|
|
MEM16007A |
Work with others in a manufacturing, engineering or related environment |
|
|
MEM16008A |
Interact with computing technology |
|
|
MSMENV272 |
Participate in environmentally sustainable work practices |
|
|
MSMWHS200 |
Work safely |
|
|
ELECTIVE UNITS Group A - Surface Preparation |
||
|
Unit code |
Unit title |
Prerequisites |
|
MEM08002C |
Pre-treat work for subsequent surface coating |
MEM13003B |
|
MEM08007B |
Control surface finish production and finished product quality |
|
|
MEM08011B |
Prepare surfaces using solvents and/or mechanical means |
MEM13003B MEM18001C MEM18002B |
|
MEM08012B |
Prepare surfaces by abrasive blasting (basic) |
MEM08016B MEM13003B |
|
MEM08013B |
Prepare surfaces by abrasive blasting (advanced) |
MEM08012B MEM08016B MEM13003B |
|
MEM08016B |
Control blast coating by-products, materials and emissions |
MEM13003B |
|
PMBPROD248 |
Prepare surfaces for coating |
|
|
One (1) relevant technical surface preparation unit may be selected from this Training Package, other endorsed Training Packages and accredited courses where it is packaged in a Certificate III. |
||
|
Group B - Coating Application |
||
|
Unit code |
Unit title |
Prerequisites |
|
MEM08014B |
Apply protective coatings (basic) |
MEM13003B |
|
MEM08015B |
Apply protective coatings (advanced) |
MEM08014B MEM13003B |
|
PMBPROD241 |
Lay up rubber lining or lag pulleys |
|
|
PMBPROD242 |
Bond polymers to surfaces |
|
|
PMBPROD265 |
Operate portable vulcanising equipment |
|
|
PMBPROD323 |
Produce powder coated products |
|
|
PMBPROD375 |
Vulcanise products using an autoclave |
|
|
One (1) relevant technical protective coating application unit may be selected from this Training Package, other endorsed Training Packages and accredited courses where it is packaged in a Certificate III. |
||
|
Group C - Other elective units |
||
|
Unit code |
Unit title |
Prerequisites |
|
MEM11001C |
Erect/dismantle scaffolding and equipment |
MEM18001C |
|
MEM11002C |
Erect/dismantle complex scaffolding and equipment |
MEM11001C MEM18001C |
|
MEM11003B |
Coordinate erection/dismantling of complex scaffolding/equipment |
MEM11001C MEM11002C MEM18001C |
|
MEM11004B |
Undertake dogging |
MEM18001C |
|
MEM11010B |
Operate mobile load shifting equipment |
|
|
MEM11011B |
Undertake manual handling |
|
|
MEM11021B |
Perform advanced operation of load shifting equipment |
MEM11010B |
|
MEM11022B |
Operate fixed/moveable load shifting equipment |
|
|
MEM13001B |
Perform emergency first aid |
|
|
MEM13003B |
Work safely with industrial chemicals and materials |
|
|
MSMWHS216 |
Operate breathing apparatus |
|
|
MSMWHS217 |
Gas test atmospheres |
|
|
MSMPER200 |
Work in accordance with an issued permit |
|
|
MSMPER202 |
Observe permit work |
|
|
MSMPER205 |
Enter confined space |
MSMPER200 |
|
MSMPER300 |
Issue work permits |
MSMWHS201 |
|
MSMWHS201 |
Conduct hazard analysis |
|
|
Group D - Other elective units |
||
|
Unit code |
Unit title |
Prerequisites |
|
MEM07001B |
Perform operational maintenance of machines/equipment |
MEM18001C |
|
MEM11012B |
Purchase materials |
|
|
MEM11016B |
Order materials |
|
|
MEM12001B |
Use comparison and basic measuring devices |
|
|
MEM15003B |
Use improvement processes in team activities |
MEM16007A |
|
MEM15004B |
Perform inspection |
|
|
MEM15005B |
Select and control inspection process and procedures |
MEM15004B |
|
MEM16002C |
Conduct formal interviews and negotiations |
|
|
MEM16005A |
Operate as a team member to conduct manufacturing, engineering or related activities |
|
|
MEM16011A |
Communicate with individuals and small groups |
MEM16006A |
|
MEM16013A |
Operate in a self-directed team |
MEM16007A |
|
MEM17001B |
Assist in the development and delivery of training in the workplace |
|
|
MEM17003A |
Assist in the provision of on the job training |
|
|
MEM18001C |
Use hand tools |
|
|
MEM18002B |
Use power tools/hand held operations |
|
|
MSMOPS301 |
Treat corrosion |
|
|
MSMOPS363 |
Organise on-site work |
|
|
MSMSUP100 |
Apply workplace context to own job |
|
|
MSMSUP303 |
Identify equipment faults |
|
|
MSMSUP390 |
Use structured problem solving tools |
|
|
MSMWJ202 |
Use high pressure water jetting equipment |
|
|
MSMWJ304 |
Operate a high pressure water jetting system |
|
|
MSMWJ305 |
Operate a drain cleaning system |
|
|
MSMWJ306 |
Operate a vacuum loading system |
|
|
MSMWJ307 |
Operate a hydro excavation system |
|
|
Group E - Balance of units The balance of units, to a maximum of nine (9), may be chosen from any combination of:
|
||
Qualification Mapping Information
Release 3. Two low use units removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers' objectives. Equivalent.
Release 2. Correction of typographical error in Group A Electives and inclusion missing text for Group E - Balance of units. Imported units updated to current versions. Equivalent.
Release 1. Supersedes and is equivalent to MSA30309 Certificate III in Surface Preparation and Coating Application.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=d1287d36-dff4-4e9f-ad2c-9d6270054027
