^

 
 

Qualification details

MSM30216 - Certificate III in Surface Preparation and Coating Application (Release 2)

Summary

Usage recommendation:
Current
Mapping:
MappingNotesDate
Supersedes and is equivalent to MSA30309 - Certificate III in Surface Preparation and Coating ApplicationSupersedes and is equivalent to MSA30309 Certificate III in Surface Preparation and Coating Application. 01/Jun/2016

Release Status:
Replaced
Releases:
ReleaseRelease date
(View details for release 4) 01/Oct/2021
(View details for release 3) 05/May/2021
2 (this release) 12/Jan/2017
(View details for release 1) 02/Jun/2016


Replaced release

You are currently viewing the components related to release 2.
The current release is release 4View release 4 details.

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnUsage RecommendationSort Table listing Units of Competency by the Usage Recommendation columnEssentialSort Table listing Units of Competency by the Essential column
MEM13001B - Perform emergency first aidPerform emergency first aidSupersededElective
MSMSUP390 - Use structured problem-solving toolsUse structured problem-solving toolsCurrentElective
MEM12024A - Perform computationsPerform computationsSupersededCore
MEM08011B - Prepare surfaces using solvents and/or mechanical meansPrepare surfaces using solvents and/or mechanical meansSupersededElective
MEM08015B - Apply protective coatings (advanced)Apply protective coatings (advanced)SupersededElective
MEM17003A - Assist in the provision of on the job trainingAssist in the provision of on the job trainingSupersededElective
MSMWHS201 - Conduct hazard analysisConduct hazard analysisCurrentElective
MSMOPS201 - Cut polymer materialsCut polymer materialsDeletedElective
MEM11001C - Erect/dismantle scaffolding and equipmentErect/dismantle scaffolding and equipmentSupersededElective
MEM15005B - Select and control inspection processes and proceduresSelect and control inspection processes and proceduresSupersededElective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 64

Classifications

SchemeCodeClassification value
ANZSCO Identifier 322211 Sheetmetal Worker 
ASCED Qualification/Course Field of Education Identifier 0307 Mechanical And Industrial Engineering And Technology 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Manufacturing 
Taxonomy - Occupation N/A Surface Preparation and Coating Operator 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 322211 Sheetmetal Worker 14/Oct/2016 
ASCED Qualification/Course Field of Education Identifier 0307 Mechanical And Industrial Engineering And Technology 14/Oct/2016 
Qualification/Course Level of Education Identifier 514 Certificate III 02/Jun/2016 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 2. Correction of typographical error in Group A Electives and inclusion missing text for Group E - Balance of units. Imported units updated to current versions. Equivalent.

Release 1. Supersedes and is equivalent to MSA30309 Certificate III in Surface Preparation and Coating Application. Units updated.

Qualification Description

The MSM30216 Certificate III in Surface Preparation and Coating Application provides the trade-level competencies required to perform the wide range of surface preparation and protective coating application operations that occur across a range of heavy industry, ships and infrastructure.

The surfaces being prepared are typically metal (usually ferrous) and may be structural or have other mechanical requirements. The protective coatings may be liquid or solid. The applied coating may, or may not be the final coat and its purpose is protective, not decorative.

People with this qualification would be expected to work under routine supervision only, preparing surfaces and/or applying protective coatings in accordance with a provided technical specification. They would be expected to recognise situations where the intended approach was not appropriate/not working and take appropriate action to ensure the final result is satisfactory.

People with this qualification may be expected to undertake some combination of:

  • abrasively blast clean surfaces to Australian Standard requirements and in accordance with the specification
  • prepare surfaces for coating as required by the specification
  • apply liquid protective surface coatings
  • apply solid polymer surface coatings (this is usually a specialised area).

They may work in a manufacturer's factory or they may work as contractors on the site of the plant/ship/infrastructure.

This work may be undertaken:

  • in a factory environment
  • in an onsite, outdoors environment
  • inside a vessel or other confined space
  • outside a vessel or structure
  • at heights
  • some combination of these.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To be awarded the MSM30216 Certificate III in Surface Preparation and Coating Application competency must be achieved in thirty-one (31)  units of competency:

  • eleven (11)  core units of competency
  • twenty (20)  elective units of competency, as specified below:
  • a minimum of three (3)  units from Group A
  • a minimum of two (2)  units from Group B
  • a minimum of three (3)  units from Group C
  • a minimum of three (3)  units from Group D
  • the balance of units, to a maximum of nine (9),  may be selected in any combination from the remaining units in Groups A, B, C or D.

Note : A total of five (5)  elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, as specified below. These comprise:

  • a maximum of one surface preparation unit (Group A)
  • a maximum of one coating application unit (Group B)
  • a maximum of three other relevant elective units.

Note : Where prerequisite units are identified they must be counted in the total number of units required for achievement of the qualification.

Core units 

Unit code 

Unit title 

MEM12023A

Perform engineering measurements

MEM12024A

Perform computations

MEM14004A

Plan to undertake a routine task

MEM14005A

Plan a complete activity

MEM15002A

Apply quality systems

MEM15024A

Apply quality procedures

MEM16006A

Organise and communicate information

MEM16007A

Work with others in a manufacturing, engineering or related environment

MEM16008A

Interact with computing technology

MSMENV272

Participate in environmentally sustainable work practices

MSMWHS200

Work safely

ELECTIVE UNITS 

Group A - Surface Preparation 

Unit code 

Unit title 

Prerequisites 

MEM08002C

Pre-treat work for subsequent surface coating

MEM13003B

MEM08007B

Control surface finish production and finished product quality

MEM08011B

Prepare surfaces using solvents and/or mechanical means

MEM13003B MEM18001C MEM18002B

MEM08012B

Prepare surfaces by abrasive blasting (basic)

MEM08016B MEM13003B

MEM08013B

Prepare surfaces by abrasive blasting (advanced)

MEM08012B MEM08016B MEM13003B

MEM08016B

Control blast coating by-products, materials and emissions

MEM13003B

PMBPROD248

Prepare surfaces for coating

One (1)  relevant technical surface preparation unit may be selected from this Training Package, other endorsed Training Packages and accredited courses where it is packaged in a Certificate III.

Group B - Coating Application 

Unit code 

Unit title 

Prerequisites 

MEM08014B

Apply protective coatings (basic)

MEM13003B

MEM08015B

Apply protective coatings (advanced)

MEM08014B MEM13003B

MSMOPS201

Cut polymer materials

MSMOPS202

Fabricate polymer materials

PMBPROD241

Lay up rubber lining or lag pulleys

PMBPROD242

Bond polymers to surfaces

PMBPROD265

Operate portable vulcanising equipment

PMBPROD323

Produce powder coated products

PMBPROD375

Vulcanise products using an autoclave

One (1)  relevant technical protective coating application unit may be selected from this Training Package, other endorsed Training Packages and accredited courses where it is packaged in a Certificate III.

Group C - Other elective units 

Unit code 

Unit title 

Prerequisites 

MEM11001C

Erect/dismantle scaffolding and equipment

MEM18001C

MEM11002C

Erect/dismantle complex scaffolding and equipment

MEM11001C MEM18001C

MEM11003B

Coordinate erection/dismantling of complex scaffolding/equipment

MEM11001C MEM11002C MEM18001C

MEM11004B

Undertake dogging

MEM18001C

MEM11010B

Operate mobile load shifting equipment

MEM11011B

Undertake manual handling

MEM11021B

Perform advanced operation of load shifting equipment

MEM11010B

MEM11022B

Operate fixed/moveable load shifting equipment

MEM13001B

Perform emergency first aid

MEM13003B

Work safely with industrial chemicals and materials

MSMWHS216

Operate breathing apparatus

MSMWHS217

Gas test atmospheres

MSMPER200

Work in accordance with an issued permit

MSMPER202

Observe permit work

MSMPER205

Enter confined space

MSMPER200

MSMPER300

Issue work permits

MSMWHS201

MSMWHS201

Conduct hazard analysis

Group D - Other elective units 

Unit code 

Unit title 

Prerequisites 

MEM07001B

Perform operational maintenance of machines/equipment

MEM18001C

MEM11012B

Purchase materials

MEM11016B

Order materials

MEM12001B

Use comparison and basic measuring devices

MEM15003B

Use improvement processes in team activities

MEM16007A

MEM15004B

Perform inspection

MEM15005B

Select and control inspection process and procedures

MEM15004B

MEM16002C

Conduct formal interviews and negotiations

MEM16005A

Operate as a team member to conduct manufacturing, engineering or related activities

MEM16011A

Communicate with individuals and small groups

MEM16006A

MEM16013A

Operate in a self-directed team

MEM16007A

MEM17001B

Assist in the development and delivery of training in the workplace

MEM17003A

Assist in the provision of on the job training

MEM18001C

Use hand tools

MEM18002B

Use power tools/hand held operations

MSMOPS301

Treat corrosion

MSMOPS363

Organise on-site work

MSMSUP100

Apply workplace context to own job

MSMSUP303

Identify equipment faults

MSMSUP390

Use structured problem solving tools

Group E - Balance of units 

The balance of units, to a maximum of nine (9), may be chosen from any combination of:

  • units from Groups A, B, C and D above, not already selected
  • up to three (3) relevant units can be selected from this Training Package, other endorsed Training Packages and accredited courses, where those units are available for inclusion at Certificate III.

Qualification Mapping Information

Release 2. Correction of typographical error in Group A Electives and inclusion missing text for Group E - Balance of units. Imported units updated to current versions. Equivalent.

Release 1. Supersedes and is equivalent to MSA30309 Certificate III in Surface Preparation and Coating Application.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=d1287d36-dff4-4e9f-ad2c-9d6270054027